REPAIR RECANNING TO CHARPOY AND VARIOUS TYPES OF CHAIRS, TABLES, OTHER WOODEN AND STEEL FURNITURE ARTICLE FOR UNIT 371, REPAIR AND PAINTING OF VARIOUS TYPES OF STEEL FURNITURE AND WOODEN FURNITURE ------- UNDER GE KAMPTEE.

Amount

SOFA SET FIVE SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 5 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make of foam : Feater foam / Sleepwell / Kurlon.

M&L for preparation of old/new sofa of 5 seater set and polishing of high gloss melamine polish of sofa single chair of 5 seater set complete all as specified & directed.

Table 900x600 With Drawers: FD-284

Removing of old unserviceable long rails of Table 900mmx600mm without drawer and S& F new Long rail made out 1st class teak wood complete all as specified and directed.

Removing of old unserviceable shortrails of Table 900mmx600mm without drawer and S& F new short rail made out 1st class teak wood complete all as specified and directed.

Removing of old unserviceable legs of Table 900mmx600mm without drawer and S& F new legs made out 1st class teak wood complete all as specified and directed.

Re-tighting the Joints of Frame of table 900mmx600mm without drawer duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed.

Removing of old unserviceable box including drawers of table 900x600 and supplying and fixing new drawers, shall be of 18mm thick prelaminted particle board except back side eand back shall be made of 6mm thick commercial plywood complete all as specified & directed and as shown in drg.

Removing of old unserviceable top of Table 900mmx600mm without drawer and S& F new Top made out Prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'Top' duly french polished complete all as specified and directed.

Table 900x600 Without Drawers: FD-231/284/41M

Removing of old unserviceable long rails of Table 900mmx600mm without drawer and S& F new Long rail made out 1st class teak wood complete all as specified and directed.

Removing of old unserviceable shortrails of Table 900mmx600mm without drawer and S& F new short rail made out 1st class teak wood complete all as specified and directed.

Removing of old unserviceable legs of Table 900mmx600mm without drawer and S& F new legs made out 1st class teak wood complete all as specified and directed.

Re-tighting the Joints of Frame of table 900mmx600mm without drawer duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed.

Removing of old unserviceable top of Table 900mmx600mm without drawer and S& F new Top made out Prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'Top' duly french polished complete all as specified and directed.

LOCKER BEDSIDE STEEL:- FD-1029

Removing of old unserviceable hasp and staple and supply & fixing of new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable leg of size 600mmx80mmx100mm and supply & fixing of new leg of size 600mmx80mmx100mm made out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed.

Chair School with Hand Rest FD120M

Removing of unserviceable PVC seat or recanning of seat and back of chair school with hand rest and supply and fixing in replacement of one peace PVC seat & back (made of blow plast or fabric ) of chair school wih hand rest all as per drg and as directed.

Removing unserviceable Writing /hand borad of chair school and S&F and fixing in replacement new Writing/hand board (made of 18mm thick Exterior grade Prelaminated Partical Board both side Teak Finish with 1 mm thick PVC beading allround) alongwith iron supporting arrangements of chair school with hand rest all as per drawing ans as directed.

Removing unserviceable Hard rubber shoes of chair school with hand board and supply and fixing in replacement of hard rubber shoes of chair school with hand board all as per drg and as directed.

M & L for painting of frame of chair school with hand board with two coats of synthetic enamel black paints including welding where required and preparation of surfaces all as directed.

CHAIR WRITING FD-202/250/280

Removing of old unserviceable rear leg of chair writing and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable arm rest of chair writing and supply and fixing with new arm rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable front leg of chair writing and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable front rail/side rail/ back rail of chair writing and supply and fixing with new front rail/side rail/ back rail of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable stiffener (side and central one) of chair writing and supplying and fixing with new stiffener (side and central one) of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old cane from chair writing (bottom) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. Make : Shah/Maharashtra/Arihant.

M&L for preparation of old/new chair writing and polishing of high gloss french polish of chair writing complete all as specified & directed.

SOFA SET FOUR SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 4 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make : Feater foam / Sleepwell / Kurlon.

M&L for preparation of old/new sofa of 4 seater set and polishing of high gloss french polish of sofa single chair of 4 seater set complete all as specified & directed.

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 4 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new leatherite cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make : Feater foam / Sleepwell / Kurlon.

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 3+2 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new leatherite cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make : Feater foam / Sleepwell / Kurlon.

CHAIR DINING (BENTWOOD) FD-2005/08

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of chair dining in special type (bentwood) and supply and fixing new seat of foam cushion 50mm thick & 32mm density of size of foam 23" x 16" and back foam 50mm thick & 32 density of size foam 12" x 16" the foam of seat & back shall be covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make of foam : Feater foam / Sleepwell / Kurlon.

M&L for preparation of old/new chair dining cushioned (bentwood) and polishing of high gloss french polish of chair dining cushioned ((bentwood) complete all as specified & directed.

CHAIR DINING CUSHIONED (MAP) FD/MAP/I/04

Removing of old unserviceableb cushion seat of chair dining (MAP) and supply and fixing new cushioned seat of chair dining (MAP) cushioned seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg. Make of foam : Feater foam / Sleepwell / Kurlon.

M&L for preparation of old/new chair dining cushioned (MAP) and polishing of high gloss french polish of chair dining cushioned (MAP) complete all as specified & directed.

TABLE DRESSING LADIES FD-251 &FD-32(M) :

Dismantleing of existing unserviceable ply wood at back of mirror frame and S&F new back of mirror made of 6mm thick plywood bwr type complete all as specified and directed.

All as per srl item No 10.10 above but 12mm ply type onthe back of dressing table (box)

Removing of existing unserviceable looking mirror of table dressing ladies and S&F new mirror 5mm thick complete all as specified and directed.

Dismantling of existing unserviceable aluminum channel of looking mirror and S&F new alluminnium channel complete all as specified and directed.

Dismantling of existing unserviceable front member of drawer of table dressing ladies and S&F new front member made out of 12 mm thick prelaminated particle board exterior grade one side in natural teak face complete all as specifed and direced.

Dismantling of existing unserviceable bottom of drawers of table dressing ladies and S&F new bottom made of ply wood 6 mm thick BWR type ISI mark complete all as shown on drawing and specified and directed.

Dismantling of existing unserviceable broken glass and S&F 5mm thick sliding glass including guide roller complete all as specified and directed

Dismantlig of existing front rail and S&F new front rail of seasoned 1st class teak woood complete all as specifed and direced.

All as per srl item No 9.80 above but side rail

All as per srl item No 9.80 above but new leg of seasoned teakwood.

Dismantleing of existing unserviceable know and S&F of CP knob 25mm dia in square/ round shape complete all as specified and direced

CHAIR DINING FD-273,279

Removing of old unserviceable rear leg of chair dining and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable front leg of chair dining and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable front rail/side rail/ back rail of chair dining and supply and fixing with new front rail/side rail/ back rail of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable bottom stiffener of chair dining and supplying and fixing with new bottom stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable back rest of chair dining and supplying and fixing with new back rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable cane stiffener of chair dining and supplying and fixing with new cane stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old cane from chair dining (bottom) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. Make : Shah/Maharashtra/Arihant.

M&L for preparation of old/new chair dining and polishing of high gloss french polish of chair dining complete all as specified & directed.

Material and labour for preparing of old/new polished wood based furniture articles as per the following steps:- Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed. Steps 2 : Staining : Any cracks or holes shall be filled with wood filler of good quality. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper (220-320). NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality french polish (mixture of shellac grains and methylated spirit in ratio 1:10) two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required, Polish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed.

Table dining 04/06 person FD-273, FD-/MAP/-II/03

Table dining 8 person FD-273/239

Teapoy FD-34

Table writing FD-275/249

Table 3'x2' with drawer FD-283/224

Table 3'x2' without drawer FD-284/223

Table dressing ladies with mirror FD-251

Table dressing gents with mirror FD-230/FD 31M

Stool dressing FD-237

Peg Table FD-277

Side board FD-272

Chair writing FD-280/250

Chair easy FD-229/DB-3960

Chair dining FD-279/228

Table bed side FD-276

Table center FD-277

Hat stand with mirror FD-361/233

M & L for preparing of furniture items as per following steps :- (i) Denting of bent surface with the help of hammer in best workmanship manner. (ii) Removing old paint by scubbing with sand paper 150 No throughly (iii) Applying one coat of metal primer Make: Asian / Dulux/ Nerolac. (iv) Applying metal putty to even the surface and wait period of 2-3 hours to be given for putty to set and dry completely, Scrub off the excess putty with 150 No sand paper and spreying little amount of water simultaneously. (v) Wipe the surfface with soft dry cloth and apply one coat of enamel paint of light sgade as approved by GE.

Rack adjustable stelel 6 tier FD/106/M

Teapoy Vrandah. FD-205/225/35m

Chair tubular steel with arms. FD-75M

Table dining ORs aluminium top. FD-1027

TABLE DINING 4/6/8 PERSONS FD-273,376,MAP-II/03, DB-3995

Removing of old unserviceable leg of table dining 4/6/8 persons and supply and fixing with new legs of table dining 4/6/8 persons of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable long rails of table dining 4/6/8 persons and supply and fixing with new long rails table dining 4/6/8 persons of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable short rails of table dining 4/6/8 persons and supply and fixing with new short rails of table dining 6/8 persons of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable top of table dining 4/6/8 persons and supplying and fixing with new pre-laminated particle board 19mm thick light shade as approved by with 6mm thick teak wood beading alround the edges of partical board complete all as specified & directed and as shown in drg.

M&L for preparation of old/new table dining 4/6/8 persons and polishing of high gloss french polish of table dining4/6/8 persons complete all as specified & directed.

Chair Revolving FUCH7XXX0035XXXX

Removing old unserviceable Seat of computer chair and supply & fixing New seat of computer chair all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable back of computer chair and supply & fixing new back of computer chair all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable cover cloth of (seat and back) from existing computer chairs. S & F of new fabric cloth duly approved by GE, shall be used for seat and back of existing chair computer as specified and directed.

Removing old unserviceable Arms rest of computer chair and supply & fixing new arms rest of computer chair all as per drawing and directed. Note : Arm Rest shall be polyurethene "D" shape.

Removing old unserviceable Revolving wheels of computer chair and supply & fixing New Revolving Wheel of computer chair all as per drawing and directed

Removing old unserviceable padestal Assembly and supply & fixing New Steel Padestal Assembly of computer Chair all as per drawing and directed.

Removing old unserviceable Hydroclic System gas lift (Air soft) and supply & fixing of New Hydrolic System (Air Soft) of computer chair all as per drawing and directed.

GI PIPE CHARPOY NEWAR INTO GI PIPE PLYTOP :- FD-220(M)

Removing of old unserviceable plytop from GI charpoy and supply & fixing two Nos stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail. The stiffners shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make : Prakash/Surya)

Removing of old unserviceable long rails having both threaded broken end and supply & fixing new long rail made out of GI tubing 32mm bore mediam grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed. Make of pipe:-SURYA/SURYA/TATA/JINDAL

Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and supply & fixing new short rails of GI charpoy obtained from Srl Item No 7(c) above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed.

Removing of old unserviceable leg and supply & fixing new leg made out of short rail of GI charpoy obtanied from Srl item No. 7 (d) above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing.

Removing of old unserviceable GI elbow three way and supply & fixing of new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed.

Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed.

Supply & fixing new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed. Make : KitplyI complete all as specified and directed./Archid/Greenply/National (Note:- Each corner of plywood should be round shaped).

ALMIRAH MEDIUM STEEL WITH SHELVES:- FD-1032

Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. Make:link /Godrej/Standard/Aligarh

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable Base channel of size 485x80x100mm and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per give in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed.

Material and labour for re-painting of mentioned below steel furnituire as per the following steps:- (a) Denting of bent surfaces with the help of hammer in best workmanship manner. (b) Removing old paint by scrubbing with sand paper 150 No thoroughly. (c) Applying one coat of metal primer. (Make Asian/Nerolac/Delux). (d) Applying metal putty to even surface.wait period 2-3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No and paper and spraying little amount of water simultaneously. (e) Wipe the surface with solt dry cloth and apply one coat of enamel paint of light shade as approved by GE.

Almirah med steel with shelves. FD-1032/243

Locker bed side steel. FD-1029

Almirah large steel with glazed door. FD-104(M)

CHAIR VARNDAH FD-1031

Removing of old cane from chair varandah steel (bottom and back) and re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed.

M&L for painting to frame of chair varandah with whioe synthetic paint after preparation of surface (after removing the old cane) complete all as specified and directed.

M&L for for gas welding to frame of chair varandah including preparation of surface and removing the unwanted welding spot complete all as specified and directed.

S&F in replacement of unserviceable portion of frame of chair varandah with 20mm conduit pipe of thickness 1.60mm duly gas welding complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.69,006.85]

Budget Furniture Industries

dhanshree enterprises

VIJ ASSOCIATES

Vishwakarma Engineering Works

NIHAL ENTERPRISES

SHRI RANI SATI TRADERS

M/s M.G. Hargunani

Bidder Name

Vishwakarma Engineering Works

SHRI RANI SATI TRADERS

NIHAL ENTERPRISES

dhanshree enterprises

H.M Traders

VIJ ASSOCIATES

M/s M.G. Hargunani

Budget Furniture Industries