Resurfacing to existing asphalted roads, Improvements to drains, footpath and Development of Parks in Padmanabhanagara Division, Bengaluru South City Corporation under Chief Ministers Infrastructure Development Program (CMIDP). (Comprising of 24 Works in G.O. No. UDD 474 MNY 2025, Dated 03.11.2025, BSCC Annexure-5 Sl. No. 07 to 30) PACKAGE No. CMIDP-PN-01.

Resurfacing to existing asphalted roads, Improvements to drains, footpath and Development of Parks in Padmanabhanagara Division, Bengaluru South City Corporation under Chief Ministers Infrastructure Development Program (CMIDP). (Comprising of 24 Works in G.O. No. UDD 474 MNY 2025, Dated 03.11.2025, BSCC Annexure-5 Sl. No. 07 to 30) PACKAGE No. CMIDP-PN-01.

Removing and Refixing of drain covering slabs (B.S Slab or RCC Slab 10cms) and Pointing in CM (1:3) complete with all lead and lift complete as per specifications and as per the directions of the Engi...

Removing and resetting of precast kerb stones fixed with CM 1:3 fixed and finished in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) complete with all lead and lift...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock pilling at designated locations and disposal of dismantl...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing B S slabs of selected quality roughly dressed having a size of 10cms thick and fixed in cement mortar(1:6) including fixing curing etc., complete with all lead and lift complete as per speci...

Providing and fixing precast reinforced cement concrete covering slabs of 10cm thick made out of M25 with OPC cement @ 340 Kgs per Cum, with 20mm and down size graded granite metal coarse aggregates @...

Providing and fixing precast reinforced cement concrete covering slabs of 23cm thick made out of M25 with OPC cement @340kgs/Cum, with 20mm down size graded metal coarse aggregates @ 0.70cum and fine ...

Providing and fixing pre cast solid cement concrete kerb stones made out of M20 witht top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plastering ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Lead for disposal of earth shall be payable at Carriage rates (Lead & Lift) by mechanical means including loading and unloading up to 15kms complete with all lead and lift complete as per specificatio...

Providing,laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mec...

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total...

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom complete with all lead and li...

Providing and laying Bituminous Concrete with not less than 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.78% Bitumen and waste pla...

Compacting original ground supporting embankment : Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Painting Two Coats on New Concrete Surfaces : Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete with all lead and lift ...

Road Marking with Hot Applied Thermoplastic compound with Reflectrising Glass beads on Bituminous surface. Providing and laying of Hot applied thermoplastic compound 2.5mm thick including reflectorisi...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and lead complete with all lead and lift complete as per specifications and as per the directions of the Engin...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever ...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and Filling in Foundation with granite/trap broken metal 100mm, and down size & with approved sand including hand packing, ramming, watering including cost of all materials and labour with a...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) For Available Stones complete with all lead and lift complete as per specification...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete with all lead and lift complete as per specifications and as per the dire...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and fixing fully plain screened sand for play area to required depth free from organic matter clay including watering ramming with all lead and lift complete with all lead and lift complete ...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M. 1:2 complete with all lead and lift complete as per specifications and as per the directions of the Engineer incharge of the work.

Supplying and fixing new Mangalore tiles on existing Reepers complete with all lead and lift complete as per specifications and as per the directions of the Engineer incharge of the work.

Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete with all lead and lift complete...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 13 1 cemen...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking c...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amp...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting complete with all lead and lift complete a...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.1.5 sqmm complete with all lead and lift complete as per specifications and as per the directions...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.2.5 sqmm complete with all lead and lift complete as per specifications and as per the directions...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.16 sqmm complete with all lead and lift complete as per specifications and as per the directions ...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 Amps complete with all lead and lift complete as per specifications and...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint -4...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 S...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 S...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable 2.5 to 25 Sqmm complete with all lead and lift complet...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable 35 to 95 Sqmm complete with all lead and lift complete...

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary) complete with all ...

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.50mm complete with...

Supply of 3 -6 Mtr Painted MS Pole with 1 nos of 30W - 50W LED Light and strip wattage of 20W, dimension of pole 2mm to 2.5mm guage with 3 MTR 100mm to 114.4 Pipe with Body any Colour with single b...

Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.25 Sqmm ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supply of 7 to 8 Mtr Painted Hot Dip Galvanised MS Pole with 2 nos of 30W- 50W LED Light and another 60W to 90W with, dimensien of pole 2mm to 2.5mm guage with bottom base with Cast Iron die casting ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying, and fixing of Hot dip galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Stand...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Fixing halogen/ metal halide/ SVL/IL/ LED flood light fitting over existing pole/ wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete with all lead and lift co...

Fixing charge sofposttop/ Gate/ Garden fitting/ LED on the existing CI/ Giorany other pipe using required size of reducer, wiring using suitable wires complete with all lead and lift complete as per s...

Supply of 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 42.07)3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral) complete with all lead and lift com...

LABOUR for Aerial Bunched Conductor & Accessories 24.05) Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral...

Supply of Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection complete with all lead and lift complete as per specifications and as per the directions of the Engineer ...

Installation of Insulation piercing connector for Main to Street Light Main : 16-95 Sqmm, Tap: 1.5-10 Sqmm (EP95) complete with all lead and lift complete as per specifications and as per the directio...

Supply of Suspension Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook) complete with all lead and lift complete as per specifications and as per the directions of the ...

Erection of Suspension Clamp - 25 to 95 Sqmm bare messenger complete with all lead and lift complete as per specifications and as per the directions of the Engineer incharge of the work.

Supply of Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm Bare Messenger(Exclusive of Pole Clamp and Eye Hook) complete with all lead and lift complete as per specifications and as per the directio...

Fixing of Dead End Clamp complete with all lead and lift complete as per specifications and as per the directions of the Engineer incharge of the work.

Supply of Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations 43.15 Universal Hook and Bolt & Nut complete with all lead and lift complete as per specifications and as p...

Fixing of Universal Hook complete with all lead and lift complete as per specifications and as per the directions of the Engineer incharge of the work.

Providing, fabricating and fixing Special Multiplay Systems consists of FRP moulded with Aluminium chequered Platforms of size 5'x5 ft with 4 Support piller made out of 75 mm dia G.I. "B" Pipes fixed ...

Providing, fabricating and fixing Multiplay Special Slider Systems consisting of the platform with 25mm dia MS pipe & Aluminium chequered plates of size 3'x3 ft & 7 ft height from ground level with ...

Providing Children Play Two Seater Standard Swing Equipment: This swing consist of 2 Nos. seats of solid metal seats powder coated of size- 500mm x 250mm x 16 SWG supported by MS chains of Length 1.8m...

Providing Children Play Standard See Saw Seater Equipment: This equipment is made up of main beam 50mm MS pipe 'A' class of length 1.98 mtr.-With two handles welded at the ends as a hand are made of 2...

Providing and fixing MINI MULTI PLAY SYSTEM consisting of LDPE Tube Slide of 7 ft. sliding length and 26" dia and LDPE crawl tube of 5 ft. crawling length, a chain ladder, fireman pole and tow numbers...

Providing Children Play Standard Duck Wheel Equipment: This is a macro revolver made up of an 4feet diameter platform with 1.5mm thick Aluminium chequered plate supported well at the bottom. There is ...

Providing and fixing plain Sadarahalli granite benches of 4feet length and 1 feet width with side arm supports of 18" height complete with all lead and lift complete as per specifications and as per t...

Providing PVC Dustbins of 3 feet Height complete with all lead and lift complete as per specifications and as per the directions of the Engineer incharge of the work.

Fabricating Providing and erecting in position of MS Hot Dip Galvonised Gate Using 72X72X48mm Sq GI Pipe frame with top pipe bending in heavy duty hydraulic press with sand packing and hot bending to ...

Providing and fixing Murals of Shree D.Chandrashekar Kambara Murals at Bugual rock in Ward 154, of frame size 6X2.5ft and mural size of 2x3ft with oval frame using this all materials polycarbonate wit...

Chest press (Area- 4' 6"x 3' Height-7') the chest press is a heavy gauge steel made out of 100mm NB MS pipe .the substructure consist of 25mm NBMS pipes and heavy duty bushes pivoted to one end and mo...

AIR WALKER (Moon walker) (Area 4'x3' Height -4') This equipment is made up of 100mm NB Heavy gauge pipes the foot step are made up of alluminium castings this healps in strenthening and toning the leg...

Bicycle (Exercise Cycle) (Area -4'x3' , Height- 4' ) This is a stationary cycle made up of Central pillar 100mm pipes The seat is mage up of FRP. This equipment gives the benefits of Cycling and inpr...

Standing Rotation (Area-6'x3' ,Height - 4'6"): Providing and fixing standing rotation made up of 100mm NBMS pipe the sub structure consists of 32mm NBMS Pipes and heavy duty self Greased SKF bearing a...

TAI CHI SPINNERS (Area 5'x5' ,Height -4') The Tai-chi spinners are made up of 100mm NB MS pipe .the substructure consists of 25 and 20mm NB MS pipe and heavy dutyself greased SKF bearings and bushes p...

Self weighted Rower (Rowing machine) Area 3'x3' Height- 3'6" (All tubular steel of 2.5mm thickness are galvanized and Zincdipped. All welded joints are scalloped as necessary and welded. All welds are...

SPINNERS (Fun steering) (Area - 2'6"x2'6", Height- 4'6") This equipmet is made up of central 100mm pillar it gives cardiovascular benefits, promots strengthning the arms and provide blood circulation ...

Pull Down Challenger (Shoulder Press) (Area-41/2' X 3', Height-7'): All tubular steel of 2.5mm thickness are galvanized and zinc dipped. all welded joints are scalloped as neccessary and welded. all w...

Double health walker (Hand Puller) (Area-51/2' X 3 1/2', Height-5 1/2') : This equipment is made up of central 100mm pillars. The first steps are made up of Aluminium castings. Two people can exercise...

Squat pushing (Leg Press) Area-3'X4', Height-7' Supply and fixing of HD Squat pushing metal: all tubular steel of 2.5mm thickness are galvanised and zinc dipped all welded joints are scalloped as nece...

Situp Station (Bench Press) Area-4'X4", height-3') : This equipment is made up of 100mm NB central pillers pipes. This is for exercising and strengthening the back and abdominal muscles maintenance fr...