RFP614 TAU DEVI LAL PLAZA AND FLY OVER

Amount

Tau devi Lal Plaza work

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. sqm

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge

Dismantling of cement concrete plain 1:4:8 or 1:5:10/Pavers.the rates include sorting and stacking dismantled, material and removing the same within a distance of 100 metres.

Dismantling of cement concrete plain 1:2: 4 the rates include sorting and stacking dismantled, material and removing the same within a distance of 100 metres.

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing the rates include sorting and stacking dismantled, material and removing the same within a distance of 100 metres.

Dismantling steel work upto a height between ridge and floor level upto 5 metres in single section including dismembering (b) channels, angles,tees and flats

Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent flling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres

earth work (exclusive of compensation for earth ) in excavation, in ordinary soil, and filling, in 15 cm layers, in foundation and plinth including ramming, watering and consolidation nder floors with earth brought from is included.

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth

First class brick laid in cement sand mortar 1:5 in foundation and plinth.

First class brickwork laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level.

12 mm thick cement plaster 1:4

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work.

Painting lines, dashes, arrows, etc. on roads, air fields like in two coats with ready mixed road making paint brushing, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved.over 10 cm in width (white and yellow spirit based paints) ITEM No-

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 10 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Cement concrete 1:1:2 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position complete in all respects.

Carriage of materials (metalled roads), lead more than 0.48 Km. including loading, uloading and stacking up 2 km

Cold twisted deformed (ribbed/ or steel) bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete

Kotah stone flooring 34 mm to 40 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.

Providing and laying gang saw cut 20 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring/dado cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 16.86.1 With granite stone of area less than 0.50 sqm.

Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Precast cement concrete 1:1.5 :3 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey.

Providing and laying 60mm thick ISI interlocking paver all shape and colours of design mix M-35 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness upto 6 inch for passing drain pipe 6 inch internal dia and repairing the hole after insertion of drain pipes etc.including finishing complete so as to make it leakproof

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors

Set stone pavement using cobble stone driveway ramp :- this is semi grid type of pavement. Stone is set over the layer of lean concrete (1:4:8) and crushed stone base. The sub-base should be non frost sussceptible material. The arrangement should be like 300mm subbase 150 mm WMM 150 mm PCC Cobble granite stone 75*75 or 90*90 or 100*100 . Stone should be locally avliable granite or other variety igneous rock equivalent to granite. Stone sets used in any area shall be uniform size. They shall hammer dressed on top to the extent that maximum depression of dressed surface with protected edge. There drerssing on the sides shall be simimilarly carried out, so as to obtain a motor joint not exceeding 20 mm in width. they shal set on the base of concrete over the bedding layer of cement motar 1:3 mm thick with joints not excedding 20 mm. The joints shall be grouted with the cement motar 1:2 with an admixture of metallic hardener such as ironite, hardonate or equal and approved variety. As per IRC SP 48-1998 point 10.22.3.5.1 alternate specification par part b

Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be full covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Constructing brick masonry road gully chamber 50x45x60 cm withbricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing & fixing PVC rain water pipe 6 kg pressure of ISI mark in cement mortar during masonry work .150 mm dia pvc pipe

Providing and installation the big side stone in all landscape area complete in all respects

Trenching in all kinds of soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50 proper levels by filling with earth or earth mixed with sludge or/and farm-yard manure before and after flooding trench with water (excluding cost of imported earth and sludge or farm yard manure)

Filling mixture of earth and sludge or farm-yard manure in the desired proportion in trenches, flooding with water and levelling (cost of supplying earth and sludge or farm-yard manure and mixing oes not include in this rate)

Spreading of sludge, farm-yard manure or/and good earth in required thickness (Cost of sludge, farmyard manure or /and good earth to be paid for separately)

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Supplying at site of work well-decayed farm- yard manure, from any available source, approved by the Engineer-in-charge including screening and stacking (12.5 % of mixing earth )

Fine dressing of the ground.

Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farm-yard manure (cost of well decayed farm yard manure to be paid separately) Holes 1.2 m dia and 1.2 m deep

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

EXOTIC PLANTING 600 mm height BOUGAINVILLIA

EXOTIC PLANTING 600 mm height -TABERNAEMONTANA DWARF

EXOTIC PLANTING 600 mm height -TRADESCANTIA SPATHACEA

EXOTIC PLANTING 600 mm height -LEGEND BOTANICAL NAMES

EXOTIC PLANTING 600 mm height -PLUMBAGO CAPENSIS

EXOTIC PLANTING 600 mm height -DURANTA

EXOTIC PLANTING 600 mm height -CUPHEA HYSSOPIFOLIA

TREES 3 mtr Height 1.5 mt canopy 150 mm girth- Cassia fistula

TREES 3 mtr Height 1.5 mt canopy 150 mm girth-Delonix regia

TREES 3 mtr Height 1.5 mt canopy 150 mm girth-Tabebuia aurea

TREES 3 mtr Height 1.5 mt canopy 150 mm girth-Millingtonia hortensis

TREES 3 mtr Height 1.5 mt canopy 150 mm girth-Mimusops elengi

TREES 3 mtr Height 1.5 mt canopy 150 mm girth-Ceiba speciosa

OPHIOPOGON JABURAN grass

Electrcial work -Design, manufacture, supply, installation, testing and commissioning of outdoor type external lighting feeder pillar of suitable size not less than 30 cm and upto 45 cm deep made out of M.S. sheet 2mm thick (14 SWG) duly compartmentalized, double door with locking arrangement (IP-54), duly fixed on MS angle iron frame work of size 50mm x 50mm x 6mm, 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminium thimbles, earthling with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint of approved shade complete etc. as reqd.

Post top lights with column: Supply and Installation of 40W LED post top light made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection including driver. Similar to Bajaj BGCL 40W LED WH or equivalent. Mounted on 4m height galvanised black coated pole with control cable & 6A MCB-1no, Foundation bolts and all fixing accessories including foundation bolts and M25 grade RCC shallow foundation.

Feature Lights : Supply and Installation of 4.5W (static white) Projector light made in cast aluminium with opal polycarbonate diffuser with IP 65 protection including driver. Similar to Bajaj BA RP A 4.5W (WH/WW) or equivalent

Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 meters below ground level complete with 20 mm G.I. pipe for watering funnel, 300 mm square C.I. frame with hinged cover, masonry housing, alternate layers of coke and salt at least 150 mm thick alround including excavation and back filling etc. complete in all respects. (for Feeder Pillar and lamp posts)

Providing & fixing 25mm x 3mm G.I. strip on surface, in recess or in ground including connections etc. as required

Providing and laying 6 SWG dia G.I. wire on surface, in recess or in ground including conections for earthing as required.

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)-4 Sqmm 3 Core

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)-2.5 Sqmm 3 Core

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)-10 Sqmm 4 Core

Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)-16 Sqmm 4 Core

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.-10 Sqmm 4 Core

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.-16 Sqmm 4 Core

Tau Devi Lal Flyover -Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. sqm

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge

Dismantling of cement concrete plain 1:4:8 or 1:5:10/Pavers.the rates include sorting and stacking dismantled, material and removing the same within a distance of 100 metres.

Dismantling of cement concrete plain 1:2: 4 the rates include sorting and stacking dismantled, material and removing the same within a distance of 100 metres

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing the rates include sorting and stacking dismantled, material and removing the same within a distance of 100 metres.

Dismantling steel work upto a height between ridge and floor level upto 5 metres in single section including dismembering (b) channels, angles,tees and flats

Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent flling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres

earth work (exclusive of compensation for earth ) in excavation, in ordinary soil, and filling, in 15 cm layers, in foundation and plinth including ramming, watering and consolidation nder floors with earth brought from is included.

Cement Concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth

First class brick laid in cement sand mortar 1:5 in foundation and plinth.

First class brickwork laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level.

12 mm thick cement plaster 1:4

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade.

Painting lines, dashes, arrows, etc. on roads, air fields like in two coats with ready mixed road making paint brushing, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved.over 10 cm in width (white and yellow spirit based paints) ITEM No-

Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1300 x 450x100 mm, reinforced with 10 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.

Cement concrete 1:1:2 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position complete in all respects. extra over the item on 1:1:2 Mix as per sor

Carriage of materials (metalled roads), lead more than 0.48 Km. including loading, uloading and stacking up 2 km

Cold twisted deformed (ribbed/ or steel) bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete

Providing and fixing 40 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut landscape area and pathway, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade

Providing and laying gang saw cut 20 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring/dado cut granite stone of required size and shape of approved shade, colour and texture in footpath,platform, flooring in road side plazas and similar locations, laid over 20mm/12mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) with adhesive including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.

Precast cement concrete 1:1.5 :3 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey.

Providing and laying 60mm thick ISI interlocking paver with powder coated in all shape and colours of design mix M-35 with approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness upto 6 inch for passing drain pipe 6 inch internal dia and repairing the hole after insertion of drain pipes etc.including finishing complete so as to make it leakproof

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors

Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be full covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Constructing brick masonry road gully chamber 50x45x60 cm withbricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing & fixing PVC rain water pipe 6 kg pressure of ISI mark in cement mortar during masonry work -150 mm dia pvc pipe

Supply and PORTA CABIN( 8*7*9) ft Type of Portacabin Lift and Shift type with rings on all four top corners for hooking for easy lifting and shifting.2.2. Base Base frame used shall be made of 125 mm x 50 mm C Channels of minimum 6 mm thick. 2.3. StiffenerBottom: 100 X 50 mm & 50 x 50 mm tubular pipes. 2.4. Top Frame Frame made of 50 X 50 mm tubular pipes 2.5. Stiffener Top 50 x 50 mm, 25 x 50 mm & 25 x 25 tubular pipes. 2.6. Side wall stiffeners Corner Post shall be of 50 x 50 mm, 25 x 50 mm Square pipes & wall thickness of 50 mm. 2.7. Exterior walls. · The external wall shall be made of 1.4 mm corrugated sheets. · Vertical corrugated sheet panels shall be continuously welded to top and base structure to offer better strength to weight ratio. · All gaps at edges, seams and bottom etc shall be sealed properly to prevent ingress of moisture. · The roof shall be made self-draining type by giving slight slope towards rear side. 2.8. Interior · The interior wall shall be made of 8 mm thick pre-laminated sheets. 2.9. Flooring · On the bottom 18 mm thick bison panel shall be fixed by means of self-taping screws. The flooring shall be made of 3 mm thick aluminum chequered plate. 2.10. Paint The structure shall be painted with one coat of zincromate primer and two coats of corrosion free Epoxy enamel Paint – All painting jobs to be done by Spray Painting. Tender Document No.3600000663 dated 18.02.2015 Page 30 of 33 2.11. Insulation 50 mm thick Glass wool insulation shall be used for walls and the roof shall be insulated with 75mm thick insulation. 2.12. Inner Paneling · The interior shall be aesthetically finished with high quality workmanship. · All horizontal and vertical corners shall be neatly and smoothly finished. 2.13. Main Entry Door · The door size shall be 7 feet X 3 feet. Interior shall be finished with same material matching with that of the interior. · Door shall be provided with heavy duty aldrop bolt with provision to lock from outside. In addition, heavy duty tower bold shall be provided for bolting from inside. · The door also will have a powder coated aluminum window fitted with 4 mm thick tinted glass and grills for protection. 2.14. Windows · There shall be five windows of size 4 feet (height) X 3 feet (width) fitted with grills for protection on each side walls (Refer the diagram). · The window shall be double shutter sliding type made of powder coated aluminum. · The sliding windows shall be fitted with 4 mm thick tinted glass. 2.15. Electrical System · All Electrical wiring shall be concealed. · Insulated Copper wires / cables of ISI quality suitable for 250V AC, 50 Hz single phase shall be used for wiring. · ISI mark PVC conduits shall be used for wiring with small size distribution board with MCB protection. All PVC conduits shall be concealed. · There shall be provision for fixing split ACs with connections for MCB & 15 Amp female plug. The hole of ACs shall be properly seaed with nuts and bolts and blind plate. · The cabin shall be fitted with following ISI quality electrical fixtures:- a) Fan 01 (ceiling fan of any of the following brands: Usha / Crompton / Bajaj / Havells / Orient) b) Tube Light - 2 Nos. c) 6 Amp Point - 1 No. d) 15 Amp Point - 1 No. e) Provision for AC fitment - 1 No. f) Bulk Head Light (external -on door & rear) - 2 Nos. g) MCB - 1 No.

SS 304 Street Dust bin of 80 litre capacity, swing type structure, . Set Contains 2 no's of dust bins, representation Stand Alone pole for mounting of twin dustbins at places where poles made with steel of 100 mm dia.Will be grouted into the ground by 300mm with concrete fixation by core cutting, the pole will be 100 mm above ground level.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified

Trenching in all kinds of soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50 proper levels by filling with earth or earth mixed with sludge or/and farm-yard manure before and after flooding trench with water (excluding cost of imported earth and sludge or farm yard manure)

Filling mixture of earth and sludge or farm-yard manure in the desired proportion in trenches, flooding with water and levelling (cost of supplying earth and sludge or farm-yard manure and mixing oes not include in this rate)

Spreading of sludge, farm-yard manure or/and good earth in required thickness (Cost of sludge, farmyard manure or /and good earth to be paid for separately)

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Supplying at site of work well-decayed farm- yard manure, from any available source, approved by the Engineer-in-charge including screening and stacking-12.5 % of mixing earth

Fine dressing of the ground.

Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farm-yard manure (cost of well decayed farm yard manure to be paid separately)-Holes 1.2 m dia and 1.2 m deep

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

EXOTIC PLANTING -edge plantation-150 mm height

EXOTIC PLANTING -hedge plantation -600 mm height

palm tree

Electrical work -Design, manufacture, supply, installation, testing and commissioning of outdoor type external lighting feeder pillar of suitable size not less than 30 cm and upto 45 cm deep made out of M.S. sheet 2mm thick (14 SWG) duly compartmentalized, double door with locking arrangement (IP-54), duly fixed on MS angle iron frame work of size 50mm x 50mm x 6mm, 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminium thimbles, earthling with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint of approved shade complete etc. as reqd.

Supply and Installation of 80W LED FLOOD LIGHT made of pressure die-cast housings with IP66 ingress protection and impact resistance of IK07. 4kV inbuilt and 10kV external surge protection. Similar to Bajaj BJFL 80W LED or equivalent.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erectedwith glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe

40mm dia GI pipe medium class

MAPCO PRECAST

Radhika Enterprises

MS B.S.Construction Company