Repair and Maintenance of 03 Nos TS Barrack of 07 BN BSF under SHQ BSF Jammu. SH EI and Fans

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.i) Group B

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface recessed steel/ PVC Conduit includingn dismentalling as required.i) Group B

Supplying and Fixing following modular switch socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. i) 5/6 Amp Switch

Supplying and Fixing following size/ modules GI Box along with modular base plate and cover plate for modular switches in recess etc as required. ii) 3 Module (75 mm x 100 mm)

Supplying and Fixing following size/ modules GI Box along with modular base plate and cover plate for modular switches in recess etc as required. iii) 6 Module (200 mm x 75 mm)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. ii) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. iii) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. iv) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. iv) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. iv) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/reces including cutting the wall and making good the same in case of recessed conduit as required. i) 20 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required

Providing and installaion of 24 W LED 6500K Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly energy efficient ready to use pack complete with all accessories and tube/lamp etc directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required.. (Make like: Havells LUMILINE PLUS (ALUMINIUM BATTENS) Code- BS24WLED865SPPCSS or similar make like Cromptom/ Philips

Providing and installation of 10 W LED tube Light 2 FT, 3000K LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required ( make like: Havells -LHEXACP5IN1W010 E-Lite LED Pride Plus Neo or similar make like Crompton/ Philips (Bajaj-BCLSB10NW, Crompton-LCTLN-10WW/CDL/NW)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(make like havells -Efficiencia Neoin metallic white color or similar make crompton/Usha/Bajaj)

Supplying, installation, testing and commissioning of 50 Watt LED Flood Light, including fitting on wall with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (Make like: Havells, JETA QUANTO PLUS Code- JETAQUANTOPLUSFLP50WLED757SYMLENS,Bajaj-Amaze BJFL 50 W LED, Crompton Rover - CFS-504-50-30-60D-SL-GL-NSG, Phillips- BVP161 Smart BRIGHT50W))

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) i) 16 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ii) 12 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i)Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ii) Double pole 32 Amp

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connection etc. as required.

Supplying, installation, testing and commissioning of indoor type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, single door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 350 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 400 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 30 cm above the ground level. The panel should not less than 1000 mm x 1000 mm x 350 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department.Incomer i) MCCB 04 Pole 125 Amp 26-35 Ka , L frame, adjustable thermal and adjustable magnetic setting, Havells/L&T = 02 nos with spreader terminals ii) Changeover swithch without enclouser 04 Pole 125 Amp Havells/L&T - 01 nos ii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make :- L&T) iii) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) ) MCCB 04 Pole 100 Amp 26-35 Ka , L frame, adjustable thermal and adjustable magnetic setting, Havells/L&T = 03 nos with spreader terminals

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required