SPL REPAIR TO FIRE FIGHTING SYSTEM AND FIRE ALARM AND DETECTION SYSTEM AT HQ 21 CORPS BLDG UNDER GE DRONACHAL

Amount

Taking down unsv non-return sluice valve (150mm) complete all as specified and as directed.

Supply, testing and fixing in repair of non-return sluice valve (150mm) class PN 1.6, it shall be swing check type in horizontal run and lift check type in vertical run of pipes, with cast iron body, stainless steel disc and nitrile rubber seat conforming to IS 5312 and IS: 14846 complete all as specified and as directed.

Taking down unsv non-return sluice valve (100mm) complete all as specified and as directed.

Supply, testing and fixing in repair of non-return sluice valve (100mm) class PN 1.6, swing check type in horizontal run and lift check type in vertical run of pipes, with cast iron body, stainless steel disc and nitrile rubber seat conforming to IS 5312 and IS: 14846 complete all as specified and as directed.

Taking down unsv butterfly valve (80mm) complete all as specified and as directed.

Supply, testing and fixing in repair of butterfly valve (80mm) conforming to IS: 13095, suitable to with- stand the pressure in the system and rating PN 20, the direction of opening and closing shall be marked and an open/shunt indicator fitted, with cast iron body, stainless steel disc and nitrile rubber seat complete all as specified and as directed.

Taking down unsv butterfly valve (100mm) complete all as specified and as directed.

Supply, testing and fixing in repair of butterfly valve (100mm) conforming to IS: 13095, suitable to with- stand the pressure in the system and rating PN 20, the direction of opening and closing shall be marked and an open/shunt indicator fitted, with cast iron body, stainless steel disc and nitrile rubber seat complete all as specified and as directed.

Taking down unsv butterfly valve (150mm) complete all as specified and as directed.

Supply, testing and fixing in repair of butterfly valve (150mm) conforming to IS: 13095, suitable to with- stand the pressure in the system and rating PN 20, the direction of opening and closing shall be marked and an open/shunt indicator fitted, with cast iron body, stainless steel disc and nitrile rubber seat complete all as specified and as directed.

Taking down unsv butterfly valve (200mm) complete all as specified and as directed.

Supply, testing and fixing in repair of butterfly valve (200mm) conforming to IS: 13095, suitable to with- stand the pressure in the system and rating PN 20, the direction of opening and closing shall be marked and an open/shunt indicator fitted, with cast iron body, stainless steel disc and nitrile rubber seat complete all as specified and as directed.

Taking down unsv ball valve (25mm) complete all as specified and as directed.

Supply, testing and fixing in repair of ball valve (25mm) made from forged brass, internally threaded to receive pipe connections, conforming to IS : 9890 complete all as specified and as directed.

Taking down unsv pressure guage complete all as specified and as directed.

Supply, testing and fixing in repair of pressure gauge 4" dial 0-14 kg complete all as specified and as directed.

Supply, testing and fixing in repair of hose pipe rubber lined woven jacketed , 63mm dia, conform to Type A 15m (Re-inforced rubber lined) of IS: 636, flexible, capable of being rolled, complete with male and female coupling at the ends ISI mark complete all as specified and as directed.

Supply, testing and fixing in repair of Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm/20mm bore brass nozzle, complete all as specified and as directed.

Supply, and fixing in repair of Weather proof hose double door hose box of size 750 x 600 x 250 mm fabricated from M.S. angle iron sections and 18 GMS sheet with full glass door and locking arrangement suitable to accommodate - 2Nos 15 M long hoses and 1 No branch pipe and nozzle. The cabinet shall be painted with one coat of primer and two coats of primer and two or more coats of synthetic enamel paint and shall be suitably mounted 1.5m or more above floor/ground with complete all as specified and as directed.

Supply, testing and fixing in repair of air release valve (20mm) , complete all as specified and as directed.

Disconnecting/ Dismentaling of main 75 HP Pump and 15 HP Jockey Pump from its foundation at Dronachhal fire fighting pump house and transporting to civil workshop for complete repair and taking back after repairing, fixing to its existing position and making all connections. Dismentalling and opening of pump assy for checking out defects. Taking out of old worn out brass impeller and M&L for filling material on worn out part, grinding, polishing and carrying out complete lathe work, refixing of shaft and check for its smooth functioning and balancing complete all as specified and as directed.

Supply and fixing in replacement the following parts of the main pump and motor of 75HP capacity original company as approved by GE/Engr-in-charge complete all as specified and as directed.

Bowl Bush

Impeller

Shaft sleeve

Pump shaft

Coupling key

Impeller key

Stud with nuts

Drain plug

CI Bowl

Bearing suitable for pump set

Supply and fixing in replacement the following parts of the jockey pump and motor of 15HP capacity original company as approved by GE/Engr-in-charge complete all as specified and as directed.

Bowl Bush

Coupling key

Impeller key

Drain plug

Stud with nuts

Disconnecting of two 7.5 HP Pumps from its foundation at Dronachal fire fighting terrace and transporting to civil workshop for complete repair and taking back after repairing, fixing to its existing position and making all connections. Dismentalling and opening of pump assy for checking out defects. Taking out of old worn out brass impeller and M&L for filling material on worn out part, grinding, polishing and carrying out complete lathe work, refixing of shaft and check for its smooth functioning and balancing. Supply and fixing in replacement the following parts of the pump and motor of 7.5HP capacity original company as approved by GE/Engr-in-charge complete all as specified and as directed.

Bowl Bush

Impeller

Neck ring

Shaft sleeve

Pump shaft

Coupling

Coupling key

Impeller key

Stud with nuts

Thrust bearing

Lower housing bush

Upper housing bush

Rotor shaft sleeve

Drain plug

Bearing suitable for pump set

Servicing of Diesel Engine driven pump 90HP at fire fighting pump house and taking out the defective/unserviceable parts and re-assembling the same after repair/replaced and testing including replacement of Engine oil, Oil filter, Diesel filter , Air Clearner Element, Cleaning of battery terminal , checking of tappet clearance & related accessories such as set of 'O' ring, set of tappet gasket, Set of washers, Dusting ,Cleaning and testing of Engine Set complete all as specified and as directed. Note : The unit rate shall include for minor spares such as bolts, nuts washers, oil seal, gasket, greasing etc as required.

S&F in replacement of leak proof, maintenance free sealed lead acid battery with nominal voltage 12V, capacity 7Ah, maximum discharge current 105A(5 sec), maximum charge current 2.1 A, operating environment -30 C to + 50 C, Lifespan upto 500 cycles, 1 year warranty required for system complete all as specified and as directed.

M & L for painting of fire hydrant boxes with stand and Hydrant Valves after preparation of old painted surface with two coat of exisiting colour synthetic enamelled paint complete all as specified and as directed.

M & L for painting of terrace pipeline, MS pipe over the ground level in yard hydrant ringline and machinery / pipes / valves etc installed at pump house after preparation of old painted surface with two coat of exisiting colour synthetic enamelled paint complete all as specified and as directed.

Taking down existing pipe of any type & supply and laying in replacement/repair of MS Pipe 'C' Class of 150mm bore complete all as specified and as directed.

Taking down existing pipe of any type & supply and laying in replacement/repair of MS Pipe 'C' Class of 100mm bore complete all as specified and as directed.

Taking down the existing unsv fire alarm control panel and supply and fixing in repair of 2 Loop to 4 Loop Control Panel - SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have expandable capacity from 2 loops to 4 loops. The Panel must have Full colour 800 x 480 LCD with resistive touch screen and automatic backlight dimming. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The panel shall have an event log of minimum 10,000 events @ 1 second resolution, Filterable and Printable. The Panel shall have Three access levels. Panel shall support upto 5000 Cause & Effects entries, with upto 20,000 inputs controlling & 20,000 Controlling outputs across the network. The Panel shall have capability for Peer to Peer networking through RS485 network card. The Panel must have 4 inbuilt programmable sounder circuits, each circuit rated at 2.5A.The Panel must have inbuilt 3 programmable inputs and 5 inbuilt programmable relay outputs. The Panel shall have up to sub-addressable 512 programmable Inputs/Outputs via optional RS485 COMMS serially connected expansion cards. The Panel shall have 240 V AC power supply along with automatic Battery Charger. The Panel shall be fully expandable via common plug in loop driver boards. The user shall have a choice of using the panel with 5.25 Amp or 10.25 Amp power supply unit which is inbuilt in the FACP and should be approved to EN54-4. The Panel shall have configurable via USB port to PC or memory stick. Approved by LPCB complete all as specified and directed.

Supply, fixing in repair of Control Module- Analogue Addressable Single Output Module . which Includes a single output, flying leads for easy installation. Electronically addressed, Approved by LPCB & Vds complete all including testing & commissioning complete all as specified and as directed.

Supply, fixing in repair of Isolator Module sensor common mounting base, Features integral Short-Circuit isolator, slim profile, Approved by LPCB complete all including testing & commissioning complete all as specified and as directed.

Supply, fixing, testing & commissioning in replacement of remote response indicators, Response indicators shall be housed in a 16 gauge aluminium casing. It shall glow clearly in case the detector to which it is connected gives an alarm signal. The word FIRE shall be clearly written on the visible face of the box. It shall have two numbers of red LED to compensate for fusing of either LED complete in all respect complete all as specified and as directed and as indicated including testing on completion.

M&L in repair/ replacement of 1.5 sq mm 2 core FRLS Armoured multi-strandard flexible copper cable for fire alarm and control system drawing in existing conduit /New PVC including taking down old unserviceable item complete all as specified and as directed.

Supply, fixing , testing of 100% dry chemical Powder type MAP90% concentrated wall mounted stored pressure portable fire extinguisher, shelf life minimum 10 years, Expellant medium-Nitrogen(N2), Confirming to "EN 3-7 + A1: 2007 & EN 3-8;2006 with latest amendment. " & BIS :IS:15683:2018 , Fire Ratings -27A, 183B, Operating temperature- -30° C to + 60° C, Service Pressure-15 bars, Burst Pressure-112 bars, Discharge time-17.6 seconds, gross weight- 9.47Kg, Internal Coating-Epoxy powder and External coating-Epoxy polyester power coated, Marine Equipment directive MED certified, CE-1128-PED certification, with 5 years OEM warranty, Capacity- 6 kg, MOC- Mild steel, Shelf life- 10 years,( Location - Both side staircase 1 num. on each floor ) complete all as specified and as directed.

Supply, fixing , testing of Wall Mounted Portable stored Pressure Water Mist fire Extinguisher with Pressure Gauge, MOC- Stainless steel, Capacity- 2 litres, EPDM hose pipe, Tested up to 5A, 25F, Applicable on Class E fire, Expellant medium-N2, Discharge time – 15 Minimum seconds, Certifications-Dual BIS:15683 & "EN 3-7 + A1: 2007 & EN 3-8;2006 with latest amendment, Service pressure-15 bars, Burst Pressure-112 bars, PED approved for CE-1128 markings from notified body, product Warranty- minimum 5 years, shelf life- 10 years, ( Location - Aditya Hall, Anant Vijay, GOCOffice, Aprajita, Café 21, Purvaiya Café ) complete all as specified and as directed.

Supply & Installation of wall mounted water stored pressure type, electrically non- conductive tested up to 35KV portable Fire Extinguishers with Pressure gauge, cylinder vessel- Stainless steel, Capacity- 6 litres, Wt. of the filled unit-10.438kg, EPDM hose pipe, Tested up to 13A, 75F, Expellant medium-N2, Discharge type and discharge time - mist form water minimum 40+seconds, Dual Certifications- BIS:IS:15683 & "EN 3-7 + A1: 2007 & EN 3-8;2006 with latest amendment. Service pressure-15 bars, Burst Pressure-112 bars, PED approved for CE-1128 markings, operating temperature- +5C to 60C, MED approved, Shelf life- 10 years, product Warranty -5 years, Shelf life- 10 years, ( Location - 14 Nos. Lobbies of all floors of the building) complete all as specified and as directed.

Supply, fixing and testing of 100% dry chemical Powder type MAP90% concentrated wall mounted stored pressure portable fire extinguisher, shelf life minimum 10 years, Expellant medium-Nitrogen(N2), Confirming to "EN 3-7 + A1: 2007 & EN 3-8;2006 with latest amendment. " & BIS :IS:15683:2018 , Fire Ratings -27A, 183B, Operating temperature- -30° C to + 60° C, Service Pressure-15 bars, Burst Pressure-112 bars, Discharge time-17.6 seconds, gross weight- 9.47Kg, Internal Coating-Epoxy powder and External coating-Epoxy polyester power coated, Marine Equipment directive MED certified, CE-1128-PED certification, with 5 years OEM warranty, Capacity- 6 kg, MOC- Mild steel, Shelf life- 10 years ( For Basement electirc panels ) complete all as specified and as directed.

M & L for construction of fire point suitable for housing of the following: - a) ABC type map 90% Powder based, 9 kg capacity - 01 No b) Fire Bucket Stand -01 Nos with Fire Buckets (filled with Dry sand) as per IS:2546 - 04 Nos. Fire bucket stand shall be made up of weather resistant powder coated steel, to be secured to the ground for additional stability and painted with fire red colour. Fire buckets of 10 Ltrs nominal capacity shall be water tight and tested for leakage, made of mild steel sheets, with thickness of body 1 mm, hemispherical bottom, with top and bottom handle dimensions as per IS:2546, the word FIRE shall be written outside the bucket in highly visible colour.

Excavation in trenches not exceeding 1.50 m wide and n.exc1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed .

Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .

M&L for Cutting hard standing ,Roads,Path, plinth protections for laying of cable/ protection pipe complete all as specified and as directed.

M&L for making good the disturbed surface by filling PCC 1:2:4 type, B-1 using 20 mm graded course aggregate to match with existing surfaces all as specified and as directed.

Friends fire Engineers (BID ID -3507850)

Prime Technology (BID ID -3506734)