Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.4 CrAccepted-AOC | ₹1.4 Cr | 1 | Accepted-AOC L1 accepted |
| 2 | 2₹1.5 CrRejected-Finance | ₹1.5 Cr | 2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | GAJENDRAA ELECTRIC COMPANY L1 | Vinoth Electricals L2 |
|---|---|---|---|---|---|
| 1.00 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 6 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and the LED luminaries details as below
a)Rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 21,250 lumens and intensity not less than 2,95,500 cd, and it shall have minimum 72 high power LED's per head and total shall be minimum 216 no's. Fixture shall be available with architectural optics with choice of beam angles of 10° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 1 no.
b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos.
c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos.
d) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no.
(The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 4 | Nos | 7,50,000 ₹30 L | 8,00,000 ₹32 L |
| 2.00 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 5 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and the LED luminaries details as below a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos.
b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos.
c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no.
(The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 4 | Nos | 4,50,000 ₹18 L | 4,75,000 ₹19 L |
| 3.00 | Design, supply and fixing of Rectangular Aluminium square pipe with suitable supports and necessary bolts and nuts ( Frame design as per the instruction from the site engineer) with 4 nos. LED Linear DC light and External Driver (IP rate 66) in suitable weather proof box as below compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED's. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 3 | Nos | 1,15,000 ₹3.5 L | 1,25,000 ₹3.8 L |
| 4.00 | Supply and Fixing of high impact resistance well glass light with 3000K/4000K. The luminarie housing material shall be pressure die cast aluminium with PC diffuser. The system wattage shall be less than 40W/35W and system lumen output should not less than 4000lm. CRI shall be greater than 80 with SDCM<5. Fixture shall equipped with mechanical impact of minimum IK08, with IP65 and Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load.(The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 20 | Nos | 5,000 ₹1 L | 5,500 ₹1.1 L |
| 5.00 | Design, supply, testing and commissioning of Pedestal of suitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and the LED luminaries details as below a)Rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.-6NOS
b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 4nos.(The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 1 | No | 8,75,000 ₹8.8 L | 8,80,000 ₹8.8 L |
| 6.00 | Design, supply, testing and commissioning of Pedestal of suitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and the LED luminaries details as below Supply of rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.-8NOS (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 30 | Nos | 87,000 ₹26.1 L | 90,000 ₹27 L |
| 7.00 | Design, supply, testing and commissioning of Pedestal of suitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and the LED luminaries details as below Supply of High Pressure Die Cast Aluminium hosuing SMD LED Floodlight Luminaire of 150watt 17000 lumen, min efficacy 115lm/w, Corelated Color Temp 3000k,CRI>70, dual optics glass + PC lens. Fixture shall equipped with mechanical impact of minimum IK07, Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load. (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement) | 8 | Nos | 15,200 ₹1.2 L | 15,500 ₹1.2 L |
| 8.00 | Design, Supply testing and commissioning of controller to author, configure, and control dynamic LED light shows for DMX lighting networks. The controller with two universe of DMX ports control up to 340 light addresses, Works as a stand-alone or computer-driven controller, Secure Digital (SD) card drive for flexible show storage , USB 2.0 interface for downloading shows and configuring from attached PC or Mac, Simple installation and wiring is required, Flexible, adaptable mounting options are expected, Should be provided with light show authoring software, Direct line voltage power supports 100 — 240 VAC , Six configurable effects — Using light show authoring software to select from six effects, adjust effect settings, such as color, speed, and brightness etc as reqd. (The rates are inclusive of three years maintenance for controllor including replacement) | 2 | Nos | 85,000 ₹1.7 L | 85,500 ₹1.7 L |
| 9.00 | Design, Supply ,testing and commissioning of compact DMX signal amplifier that takes the incoming DMX512/RDM signal and amplify the signal and supporting bi-directional communications for discovery, addressing and DMX control of light fixtures.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Operating temperature shall be -10° to 35°C. The maximum power consumption shall be less than 4.5W and input voltage shall be 12-24V DC.(The rates are inclusive of three years maintenance for DMX signal amplifier including replacement) | 3 | Nos | 29,900 ₹89,700 | 30,000 ₹90,000 |
| 10.00 | Design, Supply , testing and commissioning of compact DMX signal amplifier that takes the incoming DMX512/RDM signal and amplify the signal into long distance transmission. The housing shall be aluminum with block color finish. This compact signal amplifier supports magnetic isolation protection, protects the controllers and ensures that the DMX signal can be normally transmitted to various luminaires, improving the reliability and stability of the entire control system. The amplifier should able to transmit the DMX signal up to 100mtr or upto 64 luminaries with out signal loss. Operating temperature shall be -20° to 50°C. The maximum power consumption shall be less than 1.5W and input voltage shall be 12-24V DC. The device should be supplied as per technical specification.(The rates are inclusive of three years maintenance for DMX signal amplifier including replacement) | 4 | Nos | 16,500 ₹66,000 | 17,000 ₹68,000 |
Tender Value
₹1.4 Cr
EMD Value
₹77,900
Closing Date
2 Jun 2025, 4:00 pmClosed
Deputy Commissioner / Executive Officer
Arulmigu Sankaranarayanaswamy Temple, Sankarankoil
Providing Architectural Facade Illumination to Gopurams and Vimanams at Arulmigu Sankaranarayanaswamy Thirukoil, Sankarankoil, Tenkasi District
2025_HRCE_557118_1
9/2024-2025
Open Tender
Electrical Works
SANKARANKOVIL
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹77,900
30 Mar 2026
14 May 2025
3 Jun 2025
14 May 2025
2 Jun 2025
14 May 2025
Amount
Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 6 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and the LED luminaries details as below a)Rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 21,250 lumens and intensity not less than 2,95,500 cd, and it shall have minimum 72 high power LED's per head and total shall be minimum 216 no's. Fixture shall be available with architectural optics with choice of beam angles of 10° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 1 no. b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. d) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 5 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and the LED luminaries details as below a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Design, supply and fixing of Rectangular Aluminium square pipe with suitable supports and necessary bolts and nuts ( Frame design as per the instruction from the site engineer) with 4 nos. LED Linear DC light and External Driver (IP rate 66) in suitable weather proof box as below compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED's. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Supply and Fixing of high impact resistance well glass light with 3000K/4000K. The luminarie housing material shall be pressure die cast aluminium with PC diffuser. The system wattage shall be less than 40W/35W and system lumen output should not less than 4000lm. CRI shall be greater than 80 with SDCM<5. Fixture shall equipped with mechanical impact of minimum IK08, with IP65 and Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load.(The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Design, supply, testing and commissioning of Pedestal of suitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and the LED luminaries details as below a)Rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.-6NOS b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 4nos.(The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Design, supply, testing and commissioning of Pedestal of suitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and the LED luminaries details as below Supply of rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps, electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED's. Fixture shall be available with architectural optics with choice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.-8NOS (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Design, supply, testing and commissioning of Pedestal of suitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and the LED luminaries details as below Supply of High Pressure Die Cast Aluminium hosuing SMD LED Floodlight Luminaire of 150watt 17000 lumen, min efficacy 115lm/w, Corelated Color Temp 3000k,CRI>70, dual optics glass + PC lens. Fixture shall equipped with mechanical impact of minimum IK07, Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load. (The rates are inclusive of three years maintenance for LED luminaires , drivers and accessories including replacement)
Design, Supply ,testing and commissioning of compact DMX signal amplifier that takes the incoming DMX512/RDM signal and amplify the signal and supporting bi-directional communications for discovery, addressing and DMX control of light fixtures.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Operating temperature shall be -10° to 35°C. The maximum power consumption shall be less than 4.5W and input voltage shall be 12-24V DC.(The rates are inclusive of three years maintenance for DMX signal amplifier including replacement)
Design, Supply , testing and commissioning of compact DMX signal amplifier that takes the incoming DMX512/RDM signal and amplify the signal into long distance transmission. The housing shall be aluminum with block color finish. This compact signal amplifier supports magnetic isolation protection, protects the controllers and ensures that the DMX signal can be normally transmitted to various luminaires, improving the reliability and stability of the entire control system. The amplifier should able to transmit the DMX signal up to 100mtr or upto 64 luminaries with out signal loss. Operating temperature shall be -20° to 50°C. The maximum power consumption shall be less than 1.5W and input voltage shall be 12-24V DC. The device should be supplied as per technical specification.(The rates are inclusive of three years maintenance for DMX signal amplifier including replacement)
Supply and Installation of 4U rack for controller unit
Design, supply, testing and commissioning of Supply of 10 pieces of 2mtr factory made 2P /4P/ 5Pmale to female cable to connect the DMX enabled data line for better connectivity (The rates are inclusive of three years maintenance for 2P/4P/5P male to female connector including replacement)
Supply and clarnping of 3 1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection
Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
Supply and fixing of Waether proof controller Panel, made up of 18 SWG MS sheet of Size Back 3' x 3' x 2’ for MS Box with Double Door and Hinges and Lock and Key Arrangement, to house the 4W VTPN MCB DB, and painting with one coat of red oxide and 2 coats of synthetic enamel paint. With Necessary Connection.
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End
Supply and Installation of 1 KVA single phase UPS 2 hours backup with connection .
supply and Installation of 15 KVA Three phase Microprocessor controlled Air cooled unbalanced Electronic servo voltage stablizer with High/Low voltage cut off and single phase preventer with Builtin manual bypass arrangments
Supply and fixing of 63A 4P MCB with sheet steel enclosure in flush wall with earth connection (Higher end)
Supply and Run of Hot dip Galvanized cable tray of 300 mm x 50mm with Top cover on suitable AI frame arrangments
Supply and Run of Hot Dip Galvanised cable tray of 150mm x 50mm on roof top with necessary masonry arrangments
Supply , fabrication and erection of MS angle frame with cross Ms flat at an interval of 200mm (slotted type) suitable for supporting the Cable tray
supply and run of 3 core 2.5 sq.mm PVC sheathed armoured copper cable in existing cable tray/ HDPE pipe / DWC pipe
supply and run of 3 core 2.5 sq.mm PVC sheathed copper cable from Junction box to LED fixtures
supply and run of 3 core 1.5 sq.mm PVC sheathed copper cable from Junction box to LED fixtures
Supply and run of 3 core 2.5 sq.mm PVC unsheathed copper cable in suitable PVC rigid on wall/ceiling with special clamp.
Supply and run of CAT6 armoured HDPE cable in existing HDPE pipe/ cable tray with suitable clamp
supply and run of HDPE pipe of size 50mm/38mm with suitable clamp on existing tray /wall/ ground
Supply and fixing of weather proof SMC Junction Box of size 130mm x 130mm x 77mm to house connector with suitable gland for LED fixtures.
Supply and fixing of weather proof SMC Junction Box of size 300mm x 300mm x 110mm to house sub Controller with suitable gland for LED fixtures.
Special Plate earthing arrangments as directed by the departmental officer
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
Vinoth Electricals (BID ID -1357006)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_665435.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.11 MB
Tendernotice_2.pdf
PDF • 2.18 MB
Tendernotice_3.pdf
PDF • 0.03 MB
Tendercondition.pdf
Tender Documents • 0.68 MB
BOQ_665435.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid