DAY TO DAY MAINT OF INTERNAL ELECTRIFICATION INCLUDING PETTY REPAIRS AND WELCOME MAINT SERVICE AT OD COMPLEX UNDER GE (EAST) MATHURA

Amount

Repairs to existing damaged wiring, repairs to unserviceable lamp holders, bell, switches, sockets or any other light fittings or fixture at site by refixing the burnt wires including tightening of wires etc, attending no light complaint & repairing burnt / unserviceable main wiring, rewiring of fuse, tightening of loose wires in MCB/ any main control of buildings. Note :- (a) The quoted rates are inclusive of fixing charges of major items. Minor items such as fuse wire, GI screw, PVC copper wires of size upto 2.5 sqmm & up to 50 cm long, casing capping up to 50 cm long, insulation tape etc. (b) Any major item required for attending the complaint will be measured and paid separately under relevant items.

Supply only following items to be incorporated under item No 1 :-

Switch piano flush button, single pole one way 5 Amps.

Socket outlet 5 pin and 5/6 Amps flush type.

Switch socket combination 2 in 1, flush type 5 Amps.

Switch socket combination flush type 3 pin & 5 pin multipurpose 5 & 15 Amps.

Switch piano type, 5 Amps, 2 way.

Bell push flush type 5 Amps.

Bell Ding dong, single pole, AC 230 volts.

Electronic fan regulator step type, flush type.

Lamp holder polycarbonate body with back plate suitable for batten fittings.

Ceiling rose three terminals polycarbonate, ISI marked isolated body.

LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt. Make :- Cat part No LTB10WLED in C&S or equivalent in Philips/Osram.

Integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 4 ft white complete of capacity 1x20 Watt. Make :- Cat Part No LTTB4F20WLED/W in C&S or equivalent in Philips/Osram.

Building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 25 Watt capacity. Make :- Cat part No LTESSI25WLED in C&S or equivalent in Philips/Osram.

LED retrofit lamp 12 Watt. Make :-C&S, Cat part No LTHPLEDLAMP7W/B22 or equivalent in Philips/Osram.

Integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 2 ft white complete of capacity 1x10 Watt. Make :- Cat Part No LTTB2F10WLED/W in C&S or equivalent in Philips/Osram.

Modular switch one way, piano fiush button, single pole 5/6 Amps, 1 Module.

Modular switch one way, piano fiush button, single pole 15/16 Amps, 1 Module.

Modular Bell push flush type 5 Amps, 1 Module.

Modular Switch piano type, 5/6 Amps, 2 way, 1 Module.

Modular socket outlet 3/5 pin and 5/6 Amps flush type, 2 Module.

Modular electronic fan regulator step type, flush type 120 Watt, 2 Module.

Modular switch socket combination 3 pin, 5 Amps, 3 Module.

Modular switch socket combination 6 pin, 15 Amps, 3 Module.

Modular white cover plate with frame, 1 module.

Modular white cover plate with frame, 2 module.

Modular white cover plate with frame, 3 module.

Modular white cover plate with frame, 4 module.

Modular white cover plate with frame, 6 module.

Modular white cover plate with frame, 8 module.

Modular metal flush box 1/2 module.

Modular metal flush box 3 module.

Modular metal flush box 4 module.

Modular metal flush box 6 module.

Powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 8 way with 100 Amps rated copper bus bar. Make :- Cat part No -507621 in Legrands or equivalent.

Powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar. Make :- Cat part No -507680 in Legrands or equivalent.

Distribution Board vertical TPN 4 way double door with 200 Amps rated bus bar including 125 Amps rated MCCB with breaking capacity 16 KA.

MCB Single pole 240 volts, C series of capacity 6 to 20 Amps of breaking capacity 10 KA. Make :- Cat part No -408587 in Legrands or equivalent.

MCB Single pole and neutral 240 volts, C series of capacity 32 Amps of breaking capacity 10 KA. Make :- Cat part No -408587 in Legrands or equivalent.

MCB triple pole and neutral 240 volts, C series of capacity 63 Amps of breaking capacity 10 KA. Make :- Cat part No -408683 in Legrands or equivalent.

Microprocessor based single phase electronic tamper proof energy meter of rating 10 to 60 amp with optical communication port, conforming to IS 13779. Make :- Secure or equivalent.

Single phase, single register electronic 10-60 Amps, 240 volts, accuracy class 1.0 keypad prepayment meters with split unit and provision for TOD(Time of day) tariff and R.T.C (Real Time Clock) alongwith parallel home display unit for remote monitoring at houses with inbuilt load control switch having dual facility of meter reading from meter reading instrument including customer interface unit for data transfer including 2 Nos high grade polycarbonate meter seal with SMC meter box and as per IS:13779 specifications. Make- Secure.

Aesthetically designed 2'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 45 Watts. Make :- C&S Cat part No CYGNUS/45W/W or equivalent make in Philips, Crompton.

Aesthetically designed 1'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 24 Watts. Make:-C&S Cat part No CYGNUS/24W/W or equivalent make in Philips, Crompton.

LED round recess, aluminum housing slim down light fitting of capacity 09 Watts. Make:-C&S Cat part No CARINA-RND/9W/W or equivalent make in Philips, Crompton.

LED round recess, aluminum housing slim down light fitting of capacity 12 Watts. Make:-C&S Cat part No CARINA-RND/9W/W or equivalent make in Philips, Crompton.

Integrated type LED tube light fitting, indoor decorative PVC extruded T-5, 4 ft white complete of capacity 1x20 Watt. Make :- Cat Part No LTTB4F20WLEDP/W in C&S or equivalent in Philips/Osram.

Taking down aluminium/copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, flourescent tube light fittings etc, removing materials to store for keeping in safe custody or for taking credit and making good to the disturbed surfaces of walls, ceilings and floors etc complete all as direct

Taking down MCB distribution boards with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as directed.

Taking down old unserviceable/burnt sub main wiring of any size including earth wire and making good to the disturbed surfaces and removing the material from site complete all as directed.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (phase- Red, Neutral - black, Earth- Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories after cutting chases for conduits and sunken GI pressed steel terminal boxes covered with 3 mm thick phenolic laminated top sheet cover white for mounting switches sockets, bell push, regulators etc and making good to walls, floors etc complete for the following:-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 Amps controlled by one switch on the same board.

One socket outlet 6 Amps controlled by one switch on independent board.

One bell/buzzer point controlled by one bell push.

Material and labour for power point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (phase- Red, Neutral - black, Earth- Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories and sunken GI pressed steel terminal boxes covered with 3 mm thick phenolic laminated top sheet cover white for 5 & 15 Amps multi purpose switch socket on independent board complete all as directed.

Supply and fixing switch piano fiush button, single pole one way 5 amps complete.

Supply and fixing socket outlet 5 pin and 5/6 amps flush type complete all as directed.

Supply and fixing switch socket combination 2 in 1, flush type 5 Amps.

Supply and fixing switch socket combination flush type 3 pin & 5 pin multipurpose 5 & 15 Amps.

Supply and fixing bell push flush type 5 Amps.

Supply and fixing bell Ding dong, single pole, AC 230 volts.

Supply and fixing electronic fan regulator step type, flush type on the exiting phenolic laminated sheet all as directed.

Supply and fixing lamp holder polycarbonate body with back plate complete all as directed.

Supply and fixing ceiling rose three terminals polycarbonate as per relevant IS code, ISI marked isolated body complete all as directed.

Supply & fixing LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt complete including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make :- Cat part No LTB10WLED in C&S or equivalent in Philips/Osram.

Supply & fixing integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 4 ft white complete of capacity 1x20 Watt including making electrical connections with twin core twisted flexible copper wire of suitable size all as directed. Make :- Cat Part No LTTB4F20WLED/W in C&S or equivalent in Philips/Osram.

Supply & fixing building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 45 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed.

Material and labour for submain wiring along with earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawn in and including concealed rigid non metallic PVC conduit medium grade, ISI marked ivory colour alongwith accessorirs of following size:

2x4 Sqmm + 1x4 Sqmm (earth) in 25 mm dia conduit. Note :- Two run of 4 Sqmm, one run of 4 sqmm earth wire and 25mm dia PVC conduit shall be measured as one unit length.

2x6 Sqmm + 1x6 Sqmm (earth) in 25 mm dia conduit. Note :- Two run of 6 Sqmm, one run of 6 sqmm earth wire and 25mm dia PVC conduit shall be measured as one unit length.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 8 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed. Make :- Cat part No -507680 in Legrands or equivalent.

Supply & fixing MCB Single pole 240 volts, C series of capacity 6 to 40 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Supply & fixing MCB Single pole and neutral 240 volts, C series of capacity 32 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Supply & fixing MCB triple pole and neutral 240 volts, C series of capacity 32 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Supply & fixing MCB triple pole and neutral 240 volts, C series of capacity 63 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed. Make :- Cat part No -408683 in Legrands or equivalent.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

iswar enterprises