Upgradation / Augmentation of Department of Pharmacology, GMC Srinagar Including Labs and Museum (Civil Part).

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet

Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in Channels, angles, tees and flats

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles 10 mm to 25 mm

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x1200 mm

40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 7 mm to 10mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix :3 marble chips) by volume including cement slurry and curing complete Light shade pigment with white cement.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade

Area of slab upto 0.5 sqm

Area of slab over 0.5 sqm

Providing double edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing counter sunken wash basin with C.I. brackets, including all necessary fitting and fixtures complete job. inclusive all as per direction of Engineer Incharge

Providing/fixing of C.P fittings of approved make jacquar or equivalent .

Bib Cock

Long Body Bib Cock for Lab Sinks

Angle value

Waste pipe

Grating

Sink Mixer

Wash Basin Mixer

Providing and fixing AC-5 Laminated HDF flooring of standard melamine impregnated decorative film with highly resistant surface impregnated with melamine resins and aluminium oxide 12mm thick flooring with glueless installation technique having fire resistance ,water resistance ,and scratch resistance beneath layer of 2mm thermacoal and poly ethylene sheet for moisture resistance complete job of approved make and design by the competent authority.

Providing and fixing of AC-3 Laminated HDF wall/ceiling panelling of thickness 8 mm includes all type of fixtures and screws, including 10mm ply jamping at specified space as directed by Engineer Incharge complete job; all inclusive.

Providing and fixing Imported wooden panelling high tech knotted imported of approved make, approved design as directed by the EIC at time of execution of work incl labour, material, wastage, carriage complete job make rait wood excluding frame work and fixing in position including cost of screws, nails, etc as per the direction of EIC and all carriages of material as involved upto site of work including applying of touchwood of approved brand complete job; all inclusive

Providing and fixing 10mm ply wood of approved brand incuding underlying framework etc as per the direction of EIC and all carriages of material as involved upto site of work complete job; all inclusive.

Providing anf fixing of excel carpet over the frame of ply wood including cost of adhesive as approved by the Engineer Incharge complete job all inclusive

Providing and fixing of 5mm thick glass in frames for muesum of required size including cost of beading,silcon as per requirement as directed by Engineer Incharge complete job; all inclusive

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 meters lead

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. With resin bonded fiber glass wool with density 24 kg/cum

Providing and fixing ACP 3mm multi coloured ( Fire retardant) in partitions, ceilings, shutters frames etc including cost of rubber, neoprene gasket,taping, waterproof silicon sealent ,or as required at site as per the directions of concerned engineer in charge

Providing and fixing of imported wallpapers (Glass cloth or Fabric type) on walls/ceiling of approved quality like cassio, passion, polo or other including cost of fixing material and labour including preparing even surface to provide smooth texture of wall paper complete job confirming to IS 15418 (2003) design approved Engineer Incharge

Providing and fixing aluminum work for doors, windows, ventilators and partitio

ns with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item). With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg/sqm).

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Providing and fixing of 600mm deep Cabinets/ Almirahs of 19mm plywood with shutters including 0.8mm laminated Dulmica/Sunmica and 5mm thick glass on exposed surface and painting on all internal surface with back side of 6mm ply covered with Dunmica on external surface with all necessary fittings like locks, hinges, knobs, Magnetic catchers, locks dunmica strips, screws/ nails, adhesive tower bolts handles etc complete job: all inclusive, as per direction of Engineer Inchaerge .

Providing and fixing of plyboard of approved quality and brand for Cabinets/Almirah fixed in position complete job as per the directions of Engineer incharge; all inclusive.

19mm thick

10mm thick

Providing and fixing 0.8mm laminated dulmica/sunmica of approved brand and colour including fixed with approved adhesive properly as directed by Engineer Incharge complete job; all inclusive

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length. Imported KD Wood

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Popular wood

Providing and fixing of 25mm thick budloo wood planks in floors/ceiling incl cost of nails, polishing, carriage, etc complete job; all inclusive.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported KD Wood 30mm Thick

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge (Imported KD Wood)

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) including removing of old glass panes and fixing new glass panes to the window shutter complete job; all inclusive

Providing / fixing of hardware fixtures of approved make including necessary screws etc.

Magnetic catchers

Hydrualic hinges

Drawer channel 18"

T-bolts 6"

T-bolts 4"

Hinges 4"

Hinges 6"

Aluminum handles 8-10"

Aluminum handles 6''

Aluminum handles 4''

Lock (for Al doors)

Al drop

Cabinet/Drawer Locks

4'' fancy handles for cabinets

sliding door wheels

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing & fixing PVC pipe heavy duty Type-B (prince, Finolex), Water or Vent pipe with cowl. And necessary bends , junctions, reducers, rubber washers , adhesives , complete job also including cost of all fittings and fixture like bends Tee's Collars Sockets Spigots ,reducers ,traps, washers, E/w, Sand Cushion and Back Filling wherever required as per the direction of Engineers in charge.

Providing , installation, commissioning and testing Hot water Geyzer of approved make including fixing with bolts/ fasteners/PVC connection etc. Venus, Recold, Hindware, Havells, Jaquar, Crompton of required capacity fittings and fixtures all complete wherever required in the course of completion. complete job. 35 liters

75 mm diameter

50 mm diameter

110 mm diameter

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge

Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

External work including trenching, refilling etc. PN-10 pipe , 50mm OD (SDR-11)

Providing and fixing of 6mm polycarbonate plain coloured sheet of standard make, water proof, UV coated including all necessary fittings, self drilling/ self tapping screws, EPDM rubber, bottom and top, incl cutting to size and shape wherever required as per directions of EIC, including all lifts, leads, and carriages complete job.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing poly coated coloured CGI sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The Sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including J or L hooks, bolts, nuts, ridges, hips and valleys of required color, size and thickness with all lifts, leads and carriages complete job; all inclusive

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.

With water thinnable cement primer on wall surface h

aving VOC content less than 50grams/liter

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Painting steel work with steel paint of approved brand and manufacturer with one or more coats complete job; all inclusive.

Engagement of carpenter and labor for easing of Doors and windows and minor repairs whereever required including cleaning/removing of old glass panes, disposal of unserviceable material as directed by the EIC.

Carriage of materials by way of mechanical transport including loading unloading leads lifts from source to site of work complete job.

Sand and Aggregates for an average lead of 20Kms

Carpenter