Laying of 11KV,3x400 sq.mm. XLPE HT UG Cable from 110/11KV Mahe SS to Mandaparambath, Chalakkara in Mahe Region UT of Puducherry

Laying of 11KV,3 × 400 sq.mm. XLPE HT UG Cable

Supply of RCC Trough to provide protective cover for the UG cable as per the specification/ drawing furnished

Supply of 200mm Cast Iron pipe

Supply of 150mm Galvanized Iron pipe

Supply of materials for 2 Nos. of DP structures without poles, Bed channel and concreting etc.

Supply of 11KV, 800A, double contact AB switch

Supply and providing of Heat shrinkable 11 KV Indoor end termination kit suitable for 11 KV, 3 x 400 Sq.mm XLPE HT UG Cable with all accessories

Supply and providing of Heat shrinkable 11 KV Outdoor end termination kit suitable for 11 KV, 3 x 400 Sq.mm XLPE HT UG Cable with all accessories

Supply and providing of Cable gland suitable for 11 KV, 3 x 400 Sq.mm XLPE HT UG Cable with all accessories

Supply and providing of Stay set complete for HT

Supply and providing of 11KV Disc insulator with metal parts

Supply and providing of 11KV pin insulator with pin

Supply and providing of HT Top insulator fitting

Supply and providing of HT tapping channel cross arm without clamp

Supply and providing of 9KV Lightning arrester with clamp

Supply and stringing of 6/1/4.09mm ACSR conductor

Supply and providing of Bolt and nuts (All sizes)

Supply and providing of MS washer

Supply and providing of 50x10mm MS flat

Supply and providing of (40x5mm, 30cm length) Aluminium Bus bar

Laying of one run of XLPE power cable of grade 11 KV, 3 x 400 Sq.mm direct in ground including excavation of trench of size 0.5 m (w) x 1.2 m (d), sand cushioning, protective covering with RCC trough and refilling the trench, etc. as required in Bituminous road as specified in the tender specification

Laying of one run of XLPE power cable of grade 11 KV, 3 x 400 Sq.mm through CI pipe of size 200 mm dia direct in ground including excavation of trench of size 0.5 m (w) x 1.2 m (d), sand cushioning and refilling the trench, etc. as required in the Bituminous Road as specified in the tender specification.

Laying of additional run of XLPE Power cable of Grade 11 KV of size 3 x 400 Sq.mm direct in ground for end loose at the take off near the bay arrangement of sub-station end, near the termination D.P. structure, at the take off near the poles.

Laying of one run of 11KV, 3x400 sqmm XLPE power cable through G.I. pipe for pole raising

Labour charges for Transportation of 11 KV 3 x 400 Sq.mm XLPE HT UG Cable from Mahe SS to the respective site, including coiling, recoiling, loading and unloading by mechanical transport/crane.

Labour charges for erection of D.P. structure with 9.5 Mtrs. galvanized Tubular poles with all materials and erection of one set of double contact AB switch including, bracing, earthing, concreting (0.6 x 0.6 x 1.5 mts) & coping (0.6 x 0.6 x 0.5 mts) in 1:3:6 ratio using 20 mm HBG metal, painting and provision of link bus & jumpering arrangement with appropriate aluminium conductor/ copper (0) as specified in the tender specification/as per the direction of Engineer-in-charge. Required Tubular poles will be supplied by the Department. Labour charges for loading, unloading and Transportation of Tubular poles from Mahe stores to work site.

Labour charges for erection of 9.5 Mtrs. galvanized Tubular poles including excavation of pole pit and concreting (0.6 x 0.6 x 1.5 mts) and coping (0.6 x 0.6 x 0.5 mts) in 1:3:6 ratio using 20 mm HBG metal, earthing of Tubular poles with No.6 G.I wire, Labour charges for loading, unloading & transportation of Tubular poles from Mahe Stores to the work site. Required Tubular poles will be supplied by the Department

Labour charges for removal of surplus earth, transporting surplus materials if any to stores/section office including coiling the unused cables provided with suitable end caps for both cable ends and cable drum and other materials and unloading to the central Stores/Section office as per the direction of Engineer-in-charge.

Supplying and concreting of route marker/ cable joint marker plates at the location as directed by the Engineer-in-charge.

Preparation and supply of 5 copies cable layout drawing pasted using fevicol adhesive on cloths in the scale of 1:500 for each cable section as specified in the tender specification.

Yastel Networks Pvt Ltd

KARTHIK ENTERPRISES