RequiredOEM Authorization Certificate Bid to RA enabled No Tractor Trailer Mounted Suction Machine ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Trailer confirming to IS 8213:2000 (latest) and AIS 112 (latest) Yes * Conforming to IS:13496 for Suction Machine for cleaning Sewers
RequiredManholes and ancillary structures provided on sewer line and closed storm water drains Yes * 1/6 Necessary clearance from RTO to be obtain before supply of Trailer mounted Suction cum Jetting Machine Yes * Form 22 A - For compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR Rules Yes * Availability of test reports for all critical components from the manufacturer or OEM of Jetting Pumps
Requiredvacuum pumps
Requiredpower takeoff unit
RequiredJetting Hose etc shall be from any ILAC/NABL accredited/Central Govt Lab To be furnished to buyers on demand Yes * Avaliability of Test report fron approved Laboratory to prove conforming to specification as per AIS 112 for trailers to be furnished to buyer on demand Yes * Generic Parameters Type of Trailer mounted machines Suction * GVW of Trailer 6000 More than 6000.0 Or higher Wheel base 3150 More than 3150.0 Or higher Payload capacity of trailer 4500 More than 4500.0 Or higher Make and Model of Vacuum Pump - * Make and Model of PTO - * Make and Model of Hydraulic Motor - * Make and Model of Hydraulic Pump - * Make and Model of Suction Hose - * 2/6 Mount Type Tractor Trailer mounted * Constructional Parameters Capacity of split shaft PTO (Kgm) 200 200 Overall Length 6500 More than 6500.0 Or higher Overall Width 1880 More than 1880.0 Or higher Equipment Length 3300 * Equipment Height 1400 * Equipment Rear Over Hang No * If Yes
RequiredDeclare Equipment Rear Over Hang 0 * Derrick Arm Available Yes Yes Vacuum Pump - Rotary Vane/Sliding Vane Yes * Vacuum Pump Flow (Cu-m/hr) 440 More than 440.0 Or higher Vacuum Pump Power 15 * Rated RPM at Max Pump power 1500 * Vacuum Relief Valve Size 1 * Vacuum Suction Depth (as per IS:13496 latest) 8 More than 8.0 Or higher Suction Hose - Lightweight
Requiredheavy duty
Requiredreinforced
RequiredPVC along with quick connect coupling arrangement Yes * Suction Hose Internal Diameter (as per IS:13946 latest) 100 100.0 Suction Hose Length 3 More than 3.0 Or higher Number of Suction Hose (Nos) 5 More than 5.0 Or higher Safety Equipments - * Silencer/Filter(Micro Strainer) Yes * Exhaust Silencer and Yes * 3/6 injection cooling air Inlet Silencer/Filter Blower Outlet and Air- Exhaust Silencer Yes * Check valve Yes * Vacuum Limitation Valve Yes * Drain Off valve Yes * Total Tank Capacity (sludge tank+water tank) 4000 4000.0 - 8000.0 Or higher Water storage Tank Capacity 1000 More than 1000.0 Or higher Sludge Storage Tank capacity 3000 * Thickness of tank plate (It shall be designed at a safety factor of 4 times the operating pressure)as per IS 13496 5 More than 5.0 Or higher Material of tank Mild Steel (Grade-A) Confirming to IS 2062 latest * Surface preparation and finish of tank's Exterior - sanded prior to spray painting and spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint Yes * Surface preparation and finish of Tank's Interior - clean water two coats anti corrosive primer & two coats of grey enamel paint & Sludge shall be with two coats of epoxy paint to resist corrosion Yes * Provision for locking and unlocking arrangement of rear gate of tank
Requiredto be operated hydraulically for quick tipping and cleaning Yes * 4/6 Hose Reel Drive operated by hydraulic motor Yes * Dished Head Yes * Tank Rear Door Opening by hydraulic system Yes * Reinforcement rings in pipes Yes * Hydraulic Pump Type Gear Type * Water Level Indicator Type (with safety coverage) - * Water Level Indicator Nos 2 * Thickness of Cover for Engine
RequiredPump and Hose Reel compartment 3 More than 3.0 Or higher Material of Cover for Engine
RequiredPump and Hose Reel compartment MS Sheet MS Sheet Full bore Quick Acting Valves in the sewage path Yes * Air Pumps to safeguard the pump from overloading Yes * Make and Model of Air Pump - * Sludge Trap between the Air Pump and the Tank Yes * Float cut out valve to seal the pump suction line Yes * Lubricating system for reducing friction loss Yes * Three sewer cleaning nozzles with varying rearward angles Yes * One nozzle extension for easy fixing of the hose and the nozzle Yes * Two stop tank strainer elements Yes * 5/6 Two sets of operation and service manuals and spare parts lists Yes * Hose guide Yes * Counter Yes * Performance Parameters Warranty Time 24 More than 24.0 Or higher Warranty Distance 5000 * No of Free Service (with consumable) 6 * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
