Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹30.3 L+₹44,109 (1.48%)Rejected-Finance A 4 TARINI APARTMENT PHASE I KILBURN COLONY HINOO DISTT RANCHI JHARKHAND 834002 | RANCHI | RANCHI | JHARKHAND | 834002 | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹30.6 L+₹75,190 (2.52%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹31.7 L+₹1.9 L (6.26%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹32.4 L+₹2.5 L (8.44%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar pin 143001
CERTAIN REPAIR TO CENTRAL INSTITUTE UNDER AGE B/R-II AT AMRITSAR CANTT
2023_MES_601264_1
GE/ASR-19/2023-24
Open Tender
Civil Works
Works
180 days
GE Amritsar
Class D category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹80,000
24 Sept 2024
5 Jun 2023
27 Jun 2023
5 Jun 2023
26 Jun 2023
20 Jun 2023
Amount
Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick work but except bricks (old dismantled serviceable bricks obtained from demolition shall be reused after necessary cleaning of mortar), built in CM 1:4 ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of newly plastered/old decorated surface of wall and applying two coats of oil bound distemper with necessary putty filling ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of newly plastered/old decorated surface of ceiling and applying two coats of oil bound distemper with necessary putty filling ; Complete all as specified and as directed by Engineer-in-charge.
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by Engineer-in-charge.
Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by Engineer-in-charge.
Taking down Shutters of any description of size not exc 1sqm each ; Complete all as specified and as directed by Engineer-in-charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ; Complete all as specified and as directed by Engineer-in-charge.
Taking down Wooden Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after necessary easing and resucring with new SS butt hinges and new screws ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and as directed by Engineer-in-charge..(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE:-Sheet glass and painting shall be measured and paid Separately.
Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed
Supply and Fixing Factory made single extructed WPC but frame size 65x 125 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Chaege
Supply and Fixing Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Steel rolling shutters(1.25mm thick sheet), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type.; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Ball bearing for rolling shutters ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Safety lever locks mild steel with 4 levers. ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron); Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Min. thickness of powder coating 50 micron)
Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed
Supply and Fixing 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in aluminium door as per specification and drawing.; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads in wooden/steel window ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing figured glass pin head type & glazing with oil putty, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 150mm long Aluminium handles, cast type anodised ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick screed bed in CM 1:4 & ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:4) 10mm thick for laying floor finishes ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing glazed ceramic coloured tiles 600X1200mmx7mm to 10 mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Machine cut Kota stone slab as in skirting 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white ; Complete all as specified and as directed by Engineer-in-charge. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
Supply and Fixing in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; Complete all as specified and as directed by Engineer-in-charge.
Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair PVC Jet spray suitable for EWC.; Complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm ; Complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore.
Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and as directed by Engineer-in-charge.specified and directed.
Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
Supply and Fixing in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
Supply and Fixing in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair PVC waste pipe32mm dia fixed to WHB/Urinals ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed.
Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; Complete all as specified and as directed by Engineer-in-charge.
Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge
Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length laid in trenches including all fittings complete all as specified and directed by Engineer-in-charge
Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge
Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length laid in trenches including all fittings complete all as specified and directed by Engineer-in-charge
Supply and Fixing 110mm PVC (SWR) bends any radius with access door ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 75mm PVC (SWR) bends any radius with access door ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 75mm PVC floor trap ; Complete all as specified and as directed by Engineer-in-charge.
Demolition reinforced roofs, floors (other than ground floors), beams staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition).
Material and Labour for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in chajjas, fascia, slab and the like ; Complete all as specified and as directed by Engineer-in-charge.
Use and waste of formwork to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed bed in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with shade of marble including grinding, rounding to edges and polishing complete all as specified.
Supply and Fixing Holow Wall Pannling consisting 5mm to 10 mm thick plain cloure PVC sheet duly fited in to the wall as per ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Tofen glass 10 to 12 mm thick ordanry quality , in squre ,exceding 0.5 sqm ineach pane including rubber paiking and aluminium beading and incl solar control film 25 micron reflective type sticked to glass panes as per instruction of msnufsctures complete all as specified and directed by Engr-in-Charge .
Supply and Fixing CP wall mixer with telephonic shower arrangement and telephonic shower suitable for 15mm dia bore pipe ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing glass corner of 30cm radius made of 5.5mm thick sheet galss with CP guard rails fixed to walls with brackets ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing PVC Mirror cabinet with shelves of best quality including fixing arrangements size 600x450mm; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing centre hole mixer cast copper alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair stainless steel kitchen plate rack size 900 x 750 x 250mm deep made out of 1mm thick sheet including fitting arrangement ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound @2% weight of cement and, finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge. (WPC shall be measured and paid separatly).
Supply only integral water proofing compound ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with Shali SBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Chequered cement concrete tiles 30cm x 30cm x 22mm thick over and including 20mm thick bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed in grey cement and pigment to match the colour of tiles complete all as specified and directed by Engr-in-charge.
Dismantling boarding , any description , fixed in any position with screws ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and Labour for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling structural steel work including doors, gates including truss etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour Cutting holes (not exc 150sqcm) or into wallls or through brick walls built in Cement Mortar and making good with cement mortar 1:3 or Cement Concrete 1:2:4 Type B-1 as required at site ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Steel work in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified.
Supply and Fixing fibre glass reinforced sheeting plain 2 mm thick to 3 mm thick of any cloures having tensile strengh of as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.
Taking down aluminium window shutters of area n.exc 1 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified.
Sai Construction Co.
ESS KAY BUILDER
S S CONSTRUCTION COMPANY
BISHAN DASS
Saini Constructions
M/s Vijay Construction Co.
RAJ KAMAL BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .