COMPREHENSIVE MAINT TO CERTAIN BLDGS IN AOR OF AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed

All as per item No 2 here-in-before but except bricks

All as per

Providing, supplying & fixing PVC based Louvers of thickness not less than 8 mm of approved shade with the required groove pattern as approved by the Engr-in-charge on the vertical surface. The Item to include fixing of 8mm thick HDF board(Make. GREENPLY/ Century / Duro) on the wall with the appropriate arrangement and including neccessary fixing items and fittings. Placing louvers on the 8 mm thick HDF board with the approved adhesive so as to fix them properly on the board. The item to include cutting required for electrical DB, MCB, sockets, switches etc. The item to also include wastage of materials and measurement to be done only of the visible surface complete all as pecified and directed.

S&F 5mm thick hollow PVC panels for ceiling with EPS stuck to 0.60mm plain PVC sheet suitably placed including false ceiling grid made of GI with parameter of wall support channel size of 25 mm, inner centre frame support channel size 50mm and section for panel support channel size 75mm as per specification complete all as specified and directed by Engr-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises.

Item No 70 here-in-before but 20 mm bore pipe.

M&L for brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material & labour for vitrified double charged coloured tiles of size 1200x600x8-9mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 600x300x6-7mm/450x300x6-7mm thick (size as directed by Engr-in-charge) on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 complete all as specified & directed.

Material & labour for vitrified double charged coloured tiles of size 600x600x8-9mm thick, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thick rendering of CM (1:4) complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each.

S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed.

M&L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick glass all fixed to frame complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

S&F Solid PVC Door prelaminated frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening,and edges will be painted to match with prelam sheet complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.

Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

M&L for Powder coated aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including powder coated aluminium frame sections weighing 0.55 Kg/m(min) with one or more rebates including S&F 5 to 6 mm thick black glass all , fixed to frame complete all as specified and directed.

M&L for Powder coated aluminium window side hunge type with sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including

powder coated aluminium frame sections weighing 0.55 Kg/m(min) with one or more rebates including S&F 5 to 6 mm thick black glass complete all as specified and directed.

S & F powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutter each shutter width one half of length of window with following specification including making good to adjacent surfaces complete all as specified and directed. (a) Window frame of cross section of not less than 95mmx35mmx1.5mm thick (b) Three way track with sliding shutter of cross section of not less than 90mmx 30mmx1.1mm thick (c) Sliding shutter frame of cross section of not less than 40x18x1mm thick (d) Aluminium glazing strip size 18.2 x 16.66mm (e) S&F 5.5mm thick black glass (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter roller 1 nos (h) Two nos best quality sliding roller per shutter j) SS wire cloth 56mm with average aparture 1.4mm for one shutter (k) Fixing screws for frame 6 nos for each window complete all as specified and as directed

S&F powder coated anodised aluminium Ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated aluminium frame sections weighing 0.55 Kg/m(min) with one or more rebates including S&F 5.50 mm thick pin headed glass complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F as in repair galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified and directed.

M&L in repair 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including hinges and necessary fittings complete all as specified and directed.

S&F 100 mm long Stainless Steel glossy finish handles with SS screw, for cabnet shutter complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over 15mm thick screed bed in CM 1:6 all as specified

S & F 30mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F for Stainless steel Hydraullic hinges 180 degree fold fixed with ss screw size as per ground requirment complete all as specified. (piano)

S&F for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified.

M& L for 100mm long Aluminium handles, cast type, polished bright fixed with ss screw complete all as specified.

S&F aluminium anodised tower bolts 150mm long, of extruded section.

S&F aluminium sliding bolt 250 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F medium weight butt hinges 100mm in size complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 complete all as specified.

M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O complete all as specified and directed.

S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long.all as specified & directed

Taking down cement or lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete and specified

M & L for applying 10 mm thick rendering in CM 1:6 on brick / concrete surfaces of walls finished even and smooth without using extra cement, complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 ( 40 mm graded aggrgate) as in plinth protection, path etc finished the surface even & fair complete all as specified

M&L for in repair door closer hydraulically regulated cast iron body designation no 2 universal type suitable for door shutter of 801to 850mm in with and weight between 36 to 60 kg of aluminium (die cast ) body complete all as specified and directed.

M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and smooth without using extra cement using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly

M&L for applying 1 coat of primer complete all as specified and directed.

M&L for applying Two coat of OBD complete all as specified and directed

Material & labour for applying two coat of cement base paint complete all as specified directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded Single Side Prelam PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & Single Side Prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of Single Side Prelam PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing and stile & rails having one side feathered edge and on other side 10mm 90° bent edge.

Supply & fix 150 mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F white colour 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and complete all as specified.

S&F in repair 20 mm dia ball PTMT valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.

S&F in repair chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified

S&F in Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union.

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement.

Supply & fix PVC connections of 600mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm in repair

S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed

S&F in repair CP brass soap dish complete all as specified

Supply and fix in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

Supply and fix in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal all as specified

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Hindware Cat Part No- F-74 0022, Player Cat Part No- VA-1022

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Hindware Cat Part No- F 330023, Player Cat Part No- VA-1025

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F (in repair)brass chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.

Supply and fixing PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed

Supply & fix 50 mm wide rubber beading for doors of required size complete all as specified & directed.

S&F stainless in repair steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed

S & F in repair 25mm dia Stainless steel decorated curtain rod with braket including side knobs complete all as specified and directed.

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 all as specified

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long (for draining out the water) all as directed by engineer-in-Charge

Material and labour for damproofing to wall with two component Acrylic polymer cementitious water proof elastomeric coating four grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not less than 100 mm, then finally apply second layer mix by brush to entire surface of container covering 0.6 - 0.75 Sqm /Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days. Note: Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 metre etc. Make: Pidilite Industries Ltd/ Fosroc India Ltd/ IWL India Ltd, BASF/T-Guard ANTC of Make - Trermax, complete all as specified and directed.

M & L for cutting of bushes small trees (Peepal small plants or any other plant etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and applying neccessary chemicals/pesticides over the roots and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 3% of the weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate).

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) all as specified and directed.

Supply only liquid water proofing compound

M&L for Preparation of old surface of walls/existing treatment by complete removal of existing treatment by mechanical means complete all as specified and directed.complete all as specified & directed.

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed. Note :- The water proofing treatment work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical respresentative.

M & L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mesh 2 mm dia and size of wireme

sh 50mm X 50 mm including cutting welding and placing in position as directed by Engr in-charge.

S&F in repair for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and ountersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) all as specified & directed

M&L PCC 1:3:6 type C-0 (using 12.5 mm greded agg) for hold fast, backfilling etc for pressed steel frame etc.

S&F PVC Wall Lining consisting of PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 6 mm including Dismantling of boarding, any description, fixed in any position with nailscomplete complete all as specified and directed.

M&L for provision of powder coated GI frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board/E board in ceiling size 60cm x 60cm fixed to metacil snap gird and dismantling wall and ceiling boards or insulation boards/slabs any thickness including cover fillets, consisting of followings and all as directed:-i) Powder coated GI sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of powder coated GI main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated GI angle of size 25mmx25mmx1.0 mm powder coated thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of shall be 15 micron.

Material and labour for cleaning water tanks 500 ltrs capacity, cleaning and removing all scales and dirt etc from tanks and tank mouth of circulating pipe including disconnecting, setting side ( or lowering/ hoisting if required), reconnecting and replacing union/GI nipple etc if required complete all as specified and directed.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position not otherwise specifically provided for.

M & L PCC ( 1 : 3 : 6 ) Type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete.

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as specified & directed.

S & F in repair tank lid/ cover made out of with 0.63mm thick PGI sheet, 470mm dia suitable for fixing in water tank capacity 500/1000 ltrs incl 4 sides fastening arrangements with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheets to protect by monkeys menace complete as per sample, complete all as specified and directed.