PETTY REPAIR AGAINST DAY TO DAY COMPLAINTS AND REPAIR/MAINT TO TILLING, PLUMBING, SANITARY FITTING, ALLIED WORK AND CERTAIN MINOR WORKS IN POCKET 9 IN AGE B/R-III (SAHARANPUR) UNDER GE ROORKEE

Amount

S&F in repairs Bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed with flange (Minimum weight 15mm-105gms) complete all as specified and directed.

S&F in repairs Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed with flange (Minimum weight 15mm-120gms) complete all as specified and directed.

S & F in repair 15 MM bore stop valves/ angle valve of PTMT screwed down high pressure, with crutch or capastan head screwed both ends (minimum weight 110 Gms) fixed with flange complete all as specified and directed.

S&F shower of PTMT any colour including shower arm 195 mm long size 15mm bore pipe complete all as specified and directed.

S & F shelf of PTMT fixed with and including chromium plated brass screws and wooden plated brass screw and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F in repairs PTMT waste coupling fitting 32mm bore for WHB complete all as specified and directed. Minimum weight 45 gms.

S&F in repairs Ball valves of 15 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed.

All as per item No 07 above but 20mm bore

S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and directed.

S&F in repairs chromium plated cast copper alloy stop cock fancy type (concealed type) screwed both ends high pressure for 15mm bore size iron pipe or ferrule with flange complete all as specified and directed.

S&F in repair stop/Angle Cock ISI marked fancy type, chromium pated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipr of 15 mm bore complete all as specified and directed.

S&F in repairs CP brass shower rose 125mm size with shower arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs CP brass shower rose 125 mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 32mm dia for WHB/Sinks complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall by using clamps (110 mm bore) including dismantling of pipe complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall by using clamps (75 mm bore) including dismantling of pipe complete all as specified and directed.

S&F PVC (SWR) bends 110mm complete all as specified and directed.

S&F PVC (SWR) bends 75mm complete all as specified and directed.

S&F PVC (SWR) branch piece (single or double) equal or un equal 110mm with access door complete all as specified and directed.

S&F PVC (SWR) branch piece (single or double) equal or un equal 75 mm with access door complete all as specified and directed.

S&F in repairs PVC waste pipe of any size and description complete all as specified and directed.

M&L for Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and directed.

All as per item No 24 but 1000 ltrs capacity

S&F in repairs HDPE PVC lid (cover) for 500/1000 Ltrs capacity PVC tank as approved quality, shape and type complete all as specified and directed.

Taking up or down 15mm steel tubing and connections incl cleaning for refixing or removal to store complete all as specified and directed.

All as per item No 27 above, but 20mm

S&F tubes med grade 15 mm bore galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 29 above but 20 mm bore

S & F in repairs looking mirror 5 mm thick with and fixed with chromium plated brass screwes and cup washers complete all as specified and directed.

S&F in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and directed.

S & F in repair wall mixer Non Telephonic 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair wall mixer with 3 in 1 (Provision for over head shower and hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs health faucet with (1.5 Mtr tube & hooks) complete all as specified and directed.

S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified and directed.

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP brass shower rose 100mm size over head shower round ABS Chrome without arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs CP brass shower rose 150mm Square size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair sheet glass shelf or corner assembly consisting of 5.5mm thicksheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair 1mm thick steel plate rack size 787x610x254mm complete all as specified and directed.

S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F in repiars vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete all as specified and directed. (excluding flushing cistern and flush).

S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed.

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP brass shower rose 100mm size over head shower round ABS Chrome without arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs Grating doom 75/100 mm dia of PTMT (with or wihout hole) (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/guities embeded in cement mortar (1:3) with steel screws etc, complete all as specified and directed. (Minimum weight 190gms)

Supply and fixing in repair Harrison rails, 20mm dia mild steel, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repair colured steel curtain rod brackets and Brass knobs 35-40mm dia curtain rod complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick cement back coat in CM 1:6 as on vertical surfaces such as skirting, dados complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in colour to match.over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in cm 1:6 including demolition of old brick masonry built in cement mortar complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantires, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or ERW tubes) including distance pieces, cleats etc (Fe-410W (GdeE-250) quality B) complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc cozting GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc cozting GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs any thickness complete all as specified and directed.

M&L for providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC.

Dismantling timber scantling 40 sq cm & over in section, any position in unframed work complete all as specified and directed.

M & L 2nd class hard wood timbers scantling fixed in clean sawn complete all as specified and as directed.

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc & removal of rubbish beyond defense land complete all as specified and directed.

M&L for 15 mm thick rendering on Brick masonry or other than fair faces of brick wall For Internal surface CM 1:6 finished even and fair without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering on Brick masonry or other than fair faces of brick wall For External CM 1:4 finished even and fair without using extra cement, complete all as specified and directed.

M&L for two coats of OBD over a coat of chalk whiting with apply of 2 mm thick wall careputty of smooth surfece using of roller on old plastered surfaces of walls complete all as specified and directed.

M&L for new plastered surface on walls and applying two coats cement based paint over one coat of alkali resistant priming paint complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frames incl shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed.

Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as specified and directed.

S&F solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mm made out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC "C" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions including locking device and all necessary fitting etc complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed.

S &F factory made Flush shutters, solid core construction 40mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.

S&F 35 mm thick IInd class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 25 mm thick IInd class HW factory made Glazed and skeleton window/ ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified and directed.

All as per item No 83 above but 3mm thick pin headed glass complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tied tacks or galvanised wire stapple etc to wooden/steel doors/windows incl wooden beeding/ putty complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tied tacks or galvanised wire stapple etc to wooden/steel doors/windows incl wooden beeding/ putty complete all as specified and directed.

S&F Mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.

All as per item No 87 above but 75mm

S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

All as per item No 90 above but 100mm

S&F in repair Mild steel cold rolled butt hinges, medium weight, 75mm long, complete all as specified and directed.

S&F in repair Mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified and directed.

S&F in repair 100mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F in repair 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F in repair Mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.

S&F in repair 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

M&L for preparation of wooden old surfaces of any description not otherwise described over 10 cm girth or width and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S& F for Solid PVC wall lining cosisting of 5mm thick single side prelam plain PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for providing 50 mm thick cement concrete type C-2, (1:3:6) (using 40mm graded aggregate) complete all as specified and directed.

M&L for coloured chequered cement tiles 30cm x 30cm x 30mm thick over 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set with grey cement and pigment, jointed and pointed in neat cement slurry in floor.

M&L PCC 1:2:4 type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from PVC/RCC tanks capacity n.exc 500 Ltr capacity and from mouths of circulating pipes incl cleaning with clean water complete all as specified and directed.

M&L MS works as in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe 290 Gde E-165; complete all as specified and directed.

Fixing only New/Old chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only chain link MS Galvanised fencing, any size or type complete all as specified and directed.

S&F Mild & steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,n.exc. 5 cm and 5 to 10 mm dia complete all as specified and directed.

M&L mild steel round bars 10 mm dia as in stiffener for straightening chain link fencing in welding complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, as in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm grade stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

Returning, filling including spreding, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) nexc. 50m distance and depositing where directed at a level nexc. 1.5 m above the starting point complete all as specified and directed.

M&L for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed.

JBN CONSTRUCTION (BID ID -3099850)

SR CONSTRUCTIONS (BID ID -3113416)