Loading…
Loading…
Tender Value
₹47.7 L
EMD Value
₹95,400
Closing Date
9 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
SR.DEN/C/U
13 conditions · 2 needing a document upload
No Financial credentials are required for tenders having advertised value up to Rs.50 lakh
No Technical credentials are required for tenders having advertised value up to Rs.50 lakh
75 conditions · 20 needing a document upload
Proforma-16 for self-certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement order value less than of Rs. 10 Crores. OR Proforma-17 for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. Provisions of Make in India Policy 2017 (revised during 2024 vide Department for Promotion of Industry and Trade, Ministry of Commerce and Industry's letter No. P-45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024) issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders
Uploading of Proforma -18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract [IRSGCC] as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the attached documents to the tender for reference. Hard copy of IRSGCC (with up-to-date correction slip) may be perused in the office of the Principal Chief Engineer Officer/ South Western Railway / Hubballi - 580020. The tenderer/s is/are deemed to have kept himself/themselves fully Informed of the provisions of the IRS General conditions of Contract including all corrections and Amendments issued up to date while submission of offer and any claim that he/they is/are not aware of any amendment or correction slip to the IRSGCC shall not be entertained.
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the General Manager/Divisional Railway Manager. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalized by the Railway and will, therefore, be supplied to the contractor as and when they are finalized on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.
Manual tenders, supporting documents etc., sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED.
All requisite documents are to be properly submitted online only and the bidders should ensure that the content of the documents uploaded is distinctly legible /readable.
CORRIGENDUM NOTICE ON IREPS: Railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer.
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh. For tenders valuing more than Rs. 50.00 lakh: The offer of Tenderer(s) who do not enclose Experience Certificate & Turnover Certificate with requisite details, and supporting documents along with their Tender to establish their credentials shall be summarily rejected, even though they are working contractors or contractors on approved list.
The offer shall be evaluated only from the certificates/documents submitted along with the tender offer.
Any Certificate /Documents offered / submitted /received after the tender opening shall not be given any credit and shall not be considered.
Attestation of documents may be self attested or attested by a Gazetted Officer.
Railwayreservestherighttoverifythe authenticityofthe documents/information furnished.
IRSGCC para 6.0 of part-I (a)(ii) Tenderers will examine the various provisions of The Central Goods and ServicesTax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. (a)(iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/ UTGST /SGST Act to railway immediately after theaward of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority. (a)(iv) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. (b) When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf. (c) The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Increase/decrease of TAXES: if rates of existing GST or cess on GST for Works Contract is increased or any new tax /cess on Works Contract is imposed by Statute after the date of opening of tender but within the original date of completion/date of completion extended under clause 17 & 17A and the Contractor thereupon properly pays such taxes/cess, the Contractor shall be reimbursed the amount so paid. Further, if rates of existing GST or cess on GST for Works Contract is decreased or any tax/cess on Works Contract is decreased / removed by Statute after the date of opening of tender, the reduction in tax amount shall be recovered from Contractor's bills/Security Deposit or any other dues of Contractor with the Government of India.
Fixed Deposit Receipts (FDRs) submitted after award of tender towards Security Deposit/Performance Guarantee should be with automatic renewal facility only.
CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED FOR PARTICIPATING IN THIS TENDER.
Tenderer(s) shall note that conditional/alternate offer will not be considered and will summarily be rejected, even though such condition makes them as the lowest tenderer.
Shramik kalyan While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____Month, ____Year.
Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
Hubballi Division: Proposal for construction of additional/augmentation Running Room by toilet block at Vijayapur (BJP) station (03 additional room 06 beds) (Maintenance Period-03 years).
19UBL26-27DT120826ITEM02~SWR
19UBL26-27DT120826ITEM02
Open
Works - General
8 Months
Dharwad, Karnataka
₹0
₹95,400
14 Aug 2026
14 Aug 2026
26 Aug 2026
74 items across 3 schedules · ₹13,17,876 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 170 | 177.5 | 30,175 |
| 2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 50 | 7,294.7 | 3,64,735 |
| 3 | Foundations, footings, bases for columns | Sqm | 170 | 392.15 | 66,665.5 |
| 4 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | Sqm | 190 | 842.5 | 1,60,075 |
| 5 | Columns, piers, abutments, pillars, posts and struts | Sqm | 115 | 961.3 | 1,10,549.5 |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 6 | 10,852.95 | 65,117.7 |
| 7 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 10 | 9,504.75 | 95,047.5 |
| 8 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 20 | 9,655.7 | 1,93,114 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 7,132.25 | 71,322.5 |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 75 | 9,105.95 | 6,82,946.25 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 30 | 7,311.25 | 2,19,337.5 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 201 | 1,267.95 | 2,54,857.95 |
| 13 | Second class teak wood | cum | 1 | 1,42,949.7 | 1,42,949.7 |
| 14 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 8 | 3,473.85 | 27,790.8 |
| 15 | 300x16 mm | Each | 20 | 216.55 | 4,331 |
| 16 | 150x10 mm | Each | 12 | 59.45 | 713.4 |
| 17 | 300x20x6 mm | Each | 12 | 98.35 | 1,180.2 |
| 18 | 125 mm | Each | 18 | 39.95 | 719.1 |
| 19 | Extruded section profile size 48x40 mm | Metre | 100 | 270.2 | 27,020 |
| 20 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm ( +/- 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ( +/- 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm ( +/- 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( +/- 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in- charge. (For W.C. and bathroom door shutter). | Sqm | 35 | 2,969.25 | 1,03,923.75 |
| 21 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 60 | 570.95 | 34,257 |
| 22 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 50 | 3,720.75 | 1,86,037.5 |
| 23 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 30 | 10,993.55 | 3,29,806.5 |
| 24 | M.S. tube | Kg | 400 | 196.8 | 78,720 |
| 25 | Light shade pigment using white cement | Sqm | 125 | 1,402 | 1,75,250 |
| 26 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 225 | 1,315.3 | 2,95,942.5 |
| 27 | Size of Tile 600x600 mm | Sqm | 180 | 1,553.45 | 2,79,621 |
| 28 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 8 | 4,481.3 | 35,850.4 |
| 29 | 110 mm | Each | 20 | 136.15 | 2,723 |
| 30 | 1:4 (1 cement: 4 fine sand) | Sqm | 1100 | 347.05 | 3,81,755 |
| 31 | 1:6 (1 cement: 6 fine sand) | Sqm | 150 | 383 | 57,450 |
| 32 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2200 | 193.7 | 4,26,140 |
| 33 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 150 | 170.7 | 25,605 |
| 34 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 10.5 | 2,434.25 | 25,559.63 |
| 35 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. | Kg | 15 | 9.05 | 135.75 |
| 36 | In cement mortar | cum | 20 | 2,060.2 | 41,204 |
| 37 | In cement mortar | cum | 9 | 2,458.95 | 22,130.55 |
| 38 | For thickness of tiles 10 mm to 25 mm | Sqm | 70 | 73.4 | 5,138 |
| 39 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5 | 6,767.4 | 33,837 |
| 40 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 5 | 6,515.55 | 32,577.75 |
| 41 | Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern | Each | 2 | 13,476.35 | 26,952.7 |
| 42 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 5 | 2,648.85 | 13,244.25 |
| 43 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 4 | 349.15 | 1,396.6 |
| 44 | 40 mm dia | Each | 4 | 119.55 | 478.2 |
| 45 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 6 | 1,607.95 | 9,647.7 |
| 46 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 10 | 708.95 | 7,089.5 |
| 47 | 15 mm nominal dia Pipes | Metre | 150 | 286.8 | 43,020 |
| 48 | 20 mm nominal dia Pipes | Metre | 80 | 335 | 26,800 |
| 49 | 25 mm nominal dia Pipes | Metre | 45 | 401.55 | 18,069.75 |
| 50 | 50 mm nominal dia Pipes | Metre | 20 | 934.15 | 18,683 |
| 51 | 20 mm nominal bore | Each | 5 | 462.5 | 2,312.5 |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 15000 | 11 | 1,65,000 |
| 53 | 15 mm nominal bore | Each | 4 | 820.7 | 3,282.8 |
| 54 | 15 mm nominal bore | Each | 4 | 798.95 | 3,195.8 |
| 55 | 15 mm nominal bore | Each | 20 | 670.45 | 13,409 |
| 56 | 15mm nominal bore | Each | 18 | 574.3 | 10,337.4 |
| 57 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 20 | 118.5 | 2,370 |
| 58 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms | Each | 10 | 208.45 | 2,084.5 |
| 59 | 100 mm nominal dia | Each | 20 | 37.6 | 752 |
| 60 | 125 mm nominal dia with 25 mm waste hole | Each | 20 | 51.85 | 1,037 |
| 61 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating | Each | 5 | 196.95 | 984.75 |
| 62 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 8 | 121.4 | 971.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRGCC2022.pdf
ATTACHMENT
JPOCircular.pdf
ATTACHMENT
AnnexureV.pdf
ATTACHMENT
ACSItoXI.pdf
ATTACHMENT
NEFTFORM.pdf
ATTACHMENT
BGverificationletter.pdf
ATTACHMENT
BUILDINGMAINTENANCE1_compressed.pdf Budling Condition
ATTACHMENT
TenderDocumentlatestUpdatever6.1.pdf
ATTACHMENT
BUILDINGMAINTENANCE1_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].