GE/BAS-45/2022-23 SPECIAL REPAIR OF BLDG NO P-78 (OR MD ACCN) OF NCCSR AT MIL STN MADHOPUR UNDER GE BASOLI

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F factory made pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and as directed.

S&F Factory made pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and including two coats of synthentic enamel paint complete all as specified and as directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters (factory made), open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed

S&F 30 mm thick Factory made 2nd class hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a). complete all as specified and directed.

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M & L for 18/19mm thick Prelaminated particleboard,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed to screws to timber frame work complete all as specified and as directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 3 mm thick figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane,complete all as specified and as directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

300 mm MS Rat tail door spring for door closer,complete all as specified and directed

S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified.

S & F Curtain rails 25 mm, anodised aluminium alloy with bracket ,end bulbs, fancy type, fixed in postion as approved by GE, complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement including Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement including Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed (Note WPC shall be measured and paid seperately) including Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement. Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistence as per IS 15489:2004,Alkali & Fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon [email protected] litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface, complete all as specified and as directed.

M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes. incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. Over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes .Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.all as spd and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, including taking down cement plaster on walls etc complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x300x6 to7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L Granite black colour of any type 18 to 20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes, complete all as specified and as directed.

M&L for mounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc , complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and as directed.

M&L for refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and as directed. NOTE:- Old pipes shall be used as directe.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth, complete all as specified and as directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and as directed.

M&L for refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified. NOTE:- Old pipes shall be used as directe.

S&F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Brass CP mixer wall/ sink /basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy screwed down crutch butterfly handle with brass furrelo fixed in repairs complete all as spd and directed.

S & F in repairs Vitreous china wash basin, white Corner ,size 300 x 300 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/ PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store, complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls, complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm dia bore, complete all as specified and directed.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs complete all as specified and as directed.

S&F in repair CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F in repair cast iron cowl for 50 mm dia complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel kitchen plate rack of size 750 x 600 mm of approved make fixed with mild steel screw complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work. ( Item also applied in broken RCC chajjas and roof projection )complete all as specified and directed.

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement , complete all as specified and directed.

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound, complete all as specified and directed.

M & L for cleaning, breaking, loose concrete, cleaning of reinforcement and filling plain cement concrete 1:1 1/2 :3 type B0 using 12.5mm graded aggregate at places as per direction (the cost of scafoldings, formworks deemed to be included in the item)complete all as specified and directed.

Excavation and trenches n. exc 1.5 m wide and n.exc 1.5m in depth for foundation of manhole, as in any type of soil, complete all as specified and directed.

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal, complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20-mm graded stone aggregate as in coping etc. complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels & drains,benching of manholes complete allas spd and directed.

M&L concrete bed to drain pipes incl benching under and haunching in cement concrete 1:3:6 type C2 for 150 mm dia pipe complete all as specified and directed.

M&L 150 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as specified and directed.

M&L cutting into existing manholes (150mm dia pipe) for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch cahnnel(1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

M&L for 75 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as diretcted.

Material and labour for 50 mm thick Sand cushioning under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60 mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5 mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as specified and as directed.

M&L cement concrete type B-1 (1:2:4) (20 mm graded aggregate) as in kerb stones ,coping, bed plates and the like including weathering, slightly roundered or chamfered angles and throating, as directed including necessary form work and finishing complete all as specified.

M&L for Machine cut kota slab fooring 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed.

M&L two coats of synthetic enamel paint on old steel surfaces of any description, n.exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and directed.

S& F aluminium Peg set of six hooks size 50mm to 60mm, complete all as specified and directed.

S & F in rolled mild steel Fe-410-W(Gde-E-250) quality -B Roof trusses (framed) trussed,purlins,crane gantries,rails and fastening and heavy bracket framing(Beam,tee,angle,channel or flat sections)including distance pieces,cleats etc including red oxide and two coat of synthetic enamel paint all as specified and directed

S&F chromium plated PTMT shelves 600mmx600mm with glass, fixed with and including chromium plated brass screws and plastic cleats.

S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm, complete all as specified and directed.

S&F Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)complete all as specified and directed.

M&L for RCC cement concrete C1,1:2:4 (using 20 mm graded stone aggregate) as in landings, cover slabs, (for manholes etc.) chullah hoods, chajjas, water trough,mangers, shelves and similar articles with plain faces including Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work, complete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S & F Three tier glass shelf assembly, glass thickness not less then 4.0mm , with brass frame of chrome matt finish, with all manufacturer’s accessories, all as specified and directed.

S & F chromium plated Soap dish, approx size 16x160x90mm any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. Make Prayag Shakti, Jaquar, Pearl, Polytuf.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed. Note: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed

All as per item No11 2 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 112 but for one 3 pin 5 Amp socket outlet on same board.

All as per item No 112 but for one BELL/Bugger point controlled by one push button.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified.

S&F switch piano flush button single pole one way 5 amps 230 volts,complete all as specified and directed.

S&F switch piano 15 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed.

S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin 15 amps flush type suitable for 240 volt AC Complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings, complete all as specified and as directed.

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified and as directed.

S&F Bell Multi Music type 230 volts, complete all as specified and directed.

S& F LED Lamp 9 watt Complete all as specified and directed.

S&F in replacement LED tube light fitting. ,1x20w, 220v AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing in replacement of wall of wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed.

M&L 25 watt LED Street light/ Bldg Security light fitting of IP-66 protection, pressure die cast aluminium housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including light grade GI pipe bracket for fixing on pole/ angle iron bracket for fixing on wall as required & connecting up with three core flexible copper conductor cable of size 1.0 Sqmm complete all as specified and as directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specifed and directed

S&F of exhaust fan heavy duty plastic body 200 mm sweep with all accessories connecting up with twin core twisted flexible copper conductor cable from ceiling rose to exhaust fan including necessary fixing arrangement for proper fixing in wall complete all as specified and as directed.

S&F in replacement sheet metal powder enclosure powder coated double door VTPN 4 way having provision for one No incoming MCB DP and out going MCBs SP AC 230 Volts, 50 HZAC supply having protection IP 43, IK-09 with copper bus bar rated 200 Amps, neutral link,earth bar complete all as specified.

S&F MCCB 63 Amps 415 volts 16KA four pole, 50 HZ Meganatic fix type all as specified and directed.

S&F in replacement sheet metal powder enclosure powder coated double door SPN 8, way having provision for one No incoming MCB SPN and out going MCBs SP AC 230 Volts, 50 HZAC supply having protection IP 43, IK-09 with copper bus bar rated 200 Amps, neutral link,earth bar complete all as specified. Make: Legrand/L & T/polycab any other make as per list circulated by HQWC. Note :- MCBs shall be paid separatly

S&F in replacement MCBs isolator 40 Amps, 240 Volts, 10 KA breaking capacity of C series complete all as specified and as directed.

S&F in replacement MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 2 run of 6.0 Sqmm as earth continuity conductor(green colour) Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply,fixing& testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element element upto 2 KW, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including with suitabale and making good disturbed surface complete all as specified and directed. Make : Bajaj/Havells/Jaguar

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

Supply & fix fans ceiling complete with blades, down rod electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply & Laying GI tubing medium grade of size 25 mm bore including all fitting such as bend, Tee, union, socket etc complete in trenches complete all as specified and as directed.

S&F gate valve 25 mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe all as specified and directed.

Om Sai Ram Builders

R K Builders

HARI OM ENTERPRISES

Ashoka Engineers