Renovation and Modernization of Co-Optex Showroom building at Neyveli Township in Cuddalore District. (Re-tender)

Amount

31 : Weathering course

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

Electrical arrangements 74 : Charges for fixing of "Fan"

76 : S & L of 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : S&F of Earthing Station IS3043 (Type I)

ANNEXURE-I 10.5.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors b. In Ground Floor

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

60.1 : PVC Nahani trap (4way/2way)

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug) superior variety

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

ANNEXURE - II A1: Painting two coats with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade over a old wall surface, including one coat of priming coat on cement plastered/concrete wall surfaces or other similar works, including cost of materials, Scrapping,necessary brushes, labour charges, patty etc.,

A2: Painting two coats with ready mixed Exterior Emulsion Paint of first class quality paint of approved colour and shade over a old wall surface, including one coat of priming coat on cement plastered/concrete wall surfaces or other similar works, including cost of materials, Scrapping,necessary brushes, labour charges, patty etc.,

A3: White washing two coats for old walls using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., all complete and complying with relevant standard specifications.

A4: Painting the old Iron work and other similar works such as steel windows ventilators and grills with two coats of approved Ist class synthetic enamel ready mixed paint of approved quality and brand, thorough scrapping including cost of paint, brushes labour charges etc., complete. (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.

A5: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using sand paper as required by the departmental officers including cost of paint, brushes labour charges etc., all complete as directed by the departmental officers. (The quality and the shade of paint should be got approved by the Executive Engineer before use) complying with relevant standard specifications.

A6: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A7: Special ceiling plastering in cement mortar 1:3, 20mm thick (using crushed stone sand) including plasticizer

A8: Plastering in C.M. 1:5, 20mm tk. (using crushed stone sand) including plasticizer

A9: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring) a. Light Point with ceiling rose.

b) Light Point without ceiling rose.

A10: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(open Wiring)

A11: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself (Open wiring)

A12: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, for 5 amps 5 pin plug socket point at Convenient places (open wiring)

A13: Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, (Open Wiring)

A14: Run of main with 2 wires of 1.5 sq.mm. copper PVC insulated unsheathed single core 1.1 kv grade cable with continuous earth by means of 1.5 sqm copper PVC insulated unsheathed single core1.1. kv. grade cable (open wiring)

A15: Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, (Open Wiring)

A16: Clean removal of cement plastering both inside and outside from the existing walls of brick masonry and racking out joints 20mm deep without damaging the existing structure etc., complete and as directed by the departmental officers.

A17: Dismantling the floor plastering without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

A18: Dismantling the floor tiles, without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

A19: Removing the Existing Damaged Glass Partition and handed over the materials to showroom manager and removed the debris from site.

A20: Removing the Existing Damaged Light Fittings Wiring Circuit wiring etc complete and handed over the materials to showroom manager and removed the debris from site.

A21: Removing the Existing Damaged Racks and handed over the materials to showroom manager and removed the debris from site.

A22: Removing the Existing Damaged Silk and Cottons Counter and handed over the materials to showroom manager and removed the debris from site.

A23: Removing the Existing False ceiling and removed the debris from site etc., all complete and as directed by the departmental officers.

A24: Removing the existing AC machine and handed over to show room manager safely etc., all complete and as directed by the departmental officers.

A25: Removing the Existing Damaged Wall Panelling and removing the debries from site including the cost of labour, required tools and plants and clearing the debris away from the site etc., all complete.

A26: Servicing the Existing Rolling Shutters including wherever damaged the tension spring, leaves and side channel and applying grease etc complete.

A27: Supplying and fixing New Centre Lock Provision for Existing Rolling Shutters including necessary materials and labour charges.

A28: Supply and fixing of PVC Health faucet 1.2m long with necessary stand approved quality with ISI mark., all complete as directed by the departmental officers.

A30: Supplying and fixing 16" Dia Wall Mounting Fan with approved ISI Quality. including cost of materials, labour for fixing and necessary inter connection, scaffolding, hire charges for tools and plants etc., all complete and as directed by the departmental Officers.

A31: Supply & erection of 125 Amps capacity floor mounting metering panel board (Cubical type) of size 3.6' x 6.5' x 1' with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system with 25mm x 3mm tin coated copper flats for phases and neutral; individual metering chamber and with 2 Nos. 25 x 3mm GI flat for the earth bus on the rear side of the panel board.

A32: Providing post construction of Ant termite treatment with ISI make chemicalsby drilling ½ dia hole at frequent interval as per standard specification.

A33: Supplying and fixing 12 mm tk Saint Gobin/equivalent Toughened Glass Partition with stainless steel suitable bottom and top unit SS fittings, Pivot with necessary materials. The glass should be high polished edges and provision for fixing the fittings etc., complete.

A34: Supplying and fixing 12 mm tk Saint Gobin/equivalent Toughened Glass Door sections with stainless steel suitable bottom and top unit SS fittings, Pivot and 60cm long S.S.Handles with necessary materials. The glass should be high polished edges and provision for fixing the fittings and handles etc., complete.

A35: Supplying and fixing the Silk storage cum sales rack with 1'4" depth and also top plywood will be extended upto 1'8" and providing concealed arrangement for lighting using Kitply / equivalent 19 mm Tk Waterproof Plywood for all verticals and horizontal. 9 mm tk Plywood at backside and 9 mm tk plywood laminated sliding doors at bottom 2’0” height and remaining providing 6 mm plain glass sliding door. The cost includes inside finished with 1mm tk lamination with approved colour. And also includes necessary hardware’s like Aluminium E – channel heavy section, sliding wheel, handles, screws and nails etc., complete.

A36: Supplying and Fixing Cotton Sales Rack of 1'4" Depth and also top plywood will be extended upto 1'8" and providing concealed arrangement for lighting using Kitply / equivalent 19 mm Tk Waterproof Plywood for all Verticals and Horizontals, 9 mm tk Plywood at backside and 4 nos 12 mm Tk High edge polished glass should be provided on shelves. All exposed area to be finished with 1 mm Tk premium quality Lamination. The cost including providing Teakwood Beading at all edges and necessary hardware’s etc complete.

A37: Supplying and Fixing Cotton Sales Counter of 2’ width and 2’6” height Using Kitply / equivalent 19 mm Tk Waterproof Plywood for all Verticals and Horizontals. The counter will be be divided in two equal compartment for vertically and horizontally. Inner side will be painting using first quality two coats of paint over one coat of primer and two coats of Wall Putty.. The exposed surface finished with 1mm thick premium quality lamination. The cost also includes necessary plywood’s and 1 mm Tk Colour Lamination, Hardware’s such as fevicol,Screws, Nails, Tape roll etc complete as per design given in the diagram and direction of departmental officers.

A38: Supplying and Fixing Silk Sales Counter of 4’ width and 2’6” height Depth Using Kitply / equivalent 19 mm Tk Waterproof Plywood for all Verticals and Horizontals. Inner side will be painting using first quality two coats of paint over one coat of primer and two coats of Wall Putty. The exposed surface finished with 1mm thick premium quality lamination. The cost also includes necessary plywood’s and 1 mm Tk Colour Lamination, Hardware’s such as fevicol,Screws, Nails, Tape roll etc complete as per design given in the diagram and direction of departmental officers.

A39: Supplying and fixing of Wall Panelling with Lamination of 50 mm X 40 mm country wood reapers at intervals of 60 cm X 60 cm. frame work,the framework covered with 9 mm thick waterproof plywood. The plywood portion to be finished by 1 mm thick Colour Lamination etc complete.

A40: Supplying and fixing of Wall Paneling without Lamination using 6 mm Tk commercial plywood and 50 mm X 40 mm country wood reepers at intervals of 60 cm X 60 cm. The plywood portion to be finished by 1 mm thick Colour Lamination etc complete.

A41: Supplying and fixing of 5 mm tk Looking Mirror with 6 mm plywood on backside the mirror and necessary fittings etc., complete.

A42: Supplying and fixing Platform of 2' Width and 6" Height using 19 mm Tk waterproof Plywood Kitply or equivalent for all verticals and horizontals and same to be finished with1 mm Tk Colour Lamination. The cost also includes necessary plywood’s and 1 mm Tk Colour Lamination and Designed Teakwood Beadings at Edges, Hardware’s such as fevicol,Screws, Nails, Tape roll etc complete.

A43: Supplying and Fixing Designed Plywood Partition using 12 mm Tk waterproof Plywood Kitply or equivalent. The cost including Deco Paint as per standard specification.The cost also includes necessary CNC Design cutting as per design given in the diagram and direction of departmental officers.

A44: Supplying and Fixing Quilt and Bed Sheet Rack Partly 2' depth and other part with 1'6" Depth and also top plywood will be extended upto 2'3" and providing concealed arrangement for lighting using 19 mm Tk waterproof Plywood Kitply or equivalent make and 9 mm tk Waterproof Plywood at backside . The cost including 1 mm tk Colour Lamination for all exposed area and necessary hardware’s such as fevicol,Screws, Nails, Tape roll & Edge band tape etc complete as per design given in the diagram and direction of departmental officers.

A45: Supplying and Fixing Lungies, Towel & Shirt 1' Depth with Slanting providion Shirt Display and also top plywood will be extended upto 1'3" and providing concealed arrangement for lighting using 19 mm Tk waterproof Plywood Kitply or equivalent make and 9 mm tk Waterproof Plywood at backside . The cost including 1 mm tk Colour Lamination for all exposed area and necessary hardware’s such as fevicol,Screws, Nails, Tape roll & edge band tape etc complete as per design given in the diagram and direction of departmental officers.

A46: Supplying and Fixing Stationary Storage Unit of 1'4" Depth and Front side will be providing shutter arrangements using Kitply / equivalent 19 mm Tk Waterproof Plywood for all Verticals and Horizontals, 9 mm tk Plywood at backside and 4 nos 12 mm Tk High edge polished glass should be provided on shelves. All exposed area to be finished with 1 mm Tk premium quality Lamination. The cost including providing Teakwood Beading at all edges and necessary hardware’s etc complete.

A47: Providing and fixing 30 mm tk Waterproof flush door arrangements with lamination finish and all hardware arrangements.The cost including necessary Teakwood Beeding, Hinges, Tower Bolt etc Complete.

A48: Providing and Fixing Vinyl Wall Graphics Pasted on the surface of Wall Panelling over the racks and to complete in all aspects except the designing of the graphics. Graphics shall be given by the department.

A49: Providing Wall Cladding using Strata WPC Cladding panel size of 168 mm X 24 mm X 2.44 m over the Existing wall Panelling / Cash Counter, Sales Counter Wherever necessary. The cost also including LED Strip lights with Polycorbonite Profile inbetween the Claddings ramdomly as per std specification etc complete.

A50: Stickering the Name of the varieties over the racks using 3 mm tk Foam Board with Vinyl printed names of Various Sizes 12" to 15" of Length and 4" height.

A51: Supplying and fixing Designed Cash Counter of Size 6' X 2' X 3'6" ' using 19 mm Tk waterproof Plywood Kitply or equivalent for all verticals and horizontals. The cost also includes pasting 1 mm Tk Colour Lamination in the all exposed area. The cost also includes Providing Drawer and Glass Panels wherever necessary. And providing as per design backlight with acrylic etc complete as per design given in the diagram and direction of departmental officers.

A52: Supplying and Fixing POOJA Cupboard using 19 mm Tk waterproof Plywood Kitply or equivalent. The cost including 1 mm Tk Colour Lamination for all the exposed area etc complete as per design given in the diagram and direction of departmental officers.

A53: Providing Gyp Board false ceiling using 12mm thick SAINT GOBIN/ Equivalent board with ISI MARK Gyp board with necessary Gyp arc/Gypsum/equivalent G.I perimeter and L angle, T angle .hooks etc as per standard specification. The rate including painting two coats of Asian/ Equivalent emulsion paint over one coat of primer and putty work as per standard specification.

A54: Supplying, delivery and installation of 2.0 TR Split Type AC Unit - 3 Star Rated ISI approved Brand (The quality and the brand of AC should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.

A55: Supply and fixing of MS stand for fixing outdoor unit including the cost of stand and labor for fixing etc., all complete as directed by the departmental officers. complying with relevant standard specifications.

A56: Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay including the cost of Stabilizer and labor for fixing etc., all complete as directed by the departmental officers. complying with relevant standard specifications

A57: Supply and fixing of Copper Refrigerant Piping of 7/8" dia, including the cost of materials and labor for fixing etc., all complete as directed by the departmental officers. complying with relevant standard specifications.

A58: Suppling and Fixing Circular Ceiling Speaker of 3-6 W 90 DB Sensitivity / 90-16 KHZ frequency response with not less than 0.50 Kg. The Speakers sound surround the sterio in alround and will be sterioscopic effect , and perfect aim all the time.

A59: Supplying and fixing Strip Lights with necessary choak etc complete including the cost of materials and labor for fixing etc., all complete as directed by the departmental officers. complying with relevant standard specifications.

A60: Supply and fixing of water drain pipe line (1” PVC Pipe) including the cost of materials and labor for fixing etc., all complete as directed by the departmental officers. complying with relevant standard specifications

A61: Supplying and Fixing 50 Watts LED Focus Light in the outdoor including fixing with necessary M.S pipe, necessar connection with suitable support. (The quality and the brand of LED Light should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.

A62: Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit) etc., including cost of materials etc., all complete.

A63: Supply and Erection of Retail Luminare with Aluminium metal body housing LED Fittings Square type recessed fitting with not less than 1500 Lumens and colour temperature 3000 K of Philips or equivalent make. High performance Non yellowing diffuser providing spot free light operational in indoor application. To complete in all aspects by removing and refixing in the existing cutouts as per direction of engineers in charge. i) 15 watts

ii) 22 watts Concealed LED Fittings

iii) One feet Length Lights with havels / equivalent make.