Construction of Electric Crematorium at Hubbali-Dharwada CC Dharwad and Gas Crematorium at Belagavi CC under UIDF scheme

Construction of Electric Crematorium at Hubbali-Dharwada CC (Dharwad) under UIDF scheme

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(SR Page 9 iteam 5.4 (Volume-2)

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing & fixing of 3track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanize...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD SR 2023-24(P.No.105/12.6...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete..(PWD SR 2023-24(P.No.105/12.61) (Volume-2)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD SR 2023-24(P.No.105/12.62) (Volume-2)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(PWD SR 2023-24(P.No.105/12.64) (Volume-2)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type)(PWD SR 2023-24(P.No.107/12.75.1) (Volume-2)

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm(PWD SR...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all complete. Fixed to steel ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. S.R Page No-117 I,.No.13.14 (Volume-2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved qualitya. 32mm.dia.. (screwed end) :Page No-115,Item No-13.4.2 (Volume-2)

Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specification.Page N...

Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator(S.R Page no-17, item no - 3.4 (Volume-3)

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Construction of M30 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3, coarse and fine aggregate conforming to IS 383:...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Sand Filling in Wells complete as per Drawing and Technical Specifications. (UNI SR 2023-24 ( Vol-3 P.No.112/11.36)

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and constructing load bearing wall with concrete solid blocks having block ebsity not less than 1800 kg/m3 Having aq minimum average compressive strength of 5.00 N.mm2 confirming to IA 2185 ...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part I)1988 and IS 12592 (part II) 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing...

Providing 20mm square M S Footrest and fixing in manhole with 1:3:6 cement concrete block of 20x20x10 cms using 20mm an down size metal of size including cost of materials labour charges, curing compl...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work(PWD SR 2023-24 P.No.17/3.1(Volume-3)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (SR page no-121, Item No-13.24 (Volume-2)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. SR page no-135, Item No-14.22A (Volume-2)

Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms (SR page no-120, Item No-13.21.1 (Volume-2)

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificati...

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificati...

Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificatio...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. Page No-121,Item No-13.26 (Volume-2)

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing bright finished brass hard drawn hooks and eyes :300mm Page No-200,Item No-20.29.1 (Volume-2)

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes j...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes j...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes j...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour , HOM of equip...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :a. 25mm.dia.. Page No-117,Item No-13.53.3 (Volume-2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :a. 32mm.dia. Page No-117,Item No-13.4.2 (Volume-2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40mm.dia. Page No-117,Item No-13.4.3 (Volume-2)

Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specification.a. 40m...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :*100 mm inlet ...

Providing and fixing PTMT grating of approved quality and colour. a. 125mm dia. Page No-120,Item No-13.22.1.2 (Volume-2)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. Page No-201,Item No-20.40 (Volum...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments, electrical resistance welded steel tubes, m...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (PWD C...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR2023-24/VOL-5/Pg No-154/13.24 ) SIZE 50 MM

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR2023-24/VOL-5/Pg No-154/13.25) SIZE 50 MM

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...

Main Furnace Supply, Installation, Testing & Commissioning of Main Furnace:

Supply of Fabricated main frame for housing refractory bricks and other equipment, Furnace the main door, Furnace s...

Refractory Materials

Supply, Installation, Testing & Commissioning of Refractory items such as ceramic fiber blankets,insulation bricks, Hot Zone bricks Cold Zone Bricks(IS6), body resting bricks, ...

Electrical Heating coil Supply, Installation, Testing & Commissioning of vertical Heating coil

Power of 42KW.Heating Coils are made out of 8 swg Kanthal APM wire / Nichrome 80/20 wire of 8 Ga...

Body Charging Trolley Supply, Installation, Testing & Commissioning of Body Charging Trolley

Supply of fabricated Hydraulically operated Body Charging Trolley with power pack and connecting pipe...

Electrical Remote Control Panel Supply, Installation, Testing & Commissioning of Electrical Remote control panel

The control panel is built with the following components housed in Panel made ...

Control & Power cables Supply, Installation, Testing & Commissioning of Control & Power Cables

Supply of power cables, bus bar laying, supporting tray, conduit pipes, from the control panel to variou...

Water Pump Supply, Installation, Testing & Commissioning of Water pump Supply of Water pump for scrubber unit. 1HP motor, 3Phase, 415V,for circulating t...

Fresh Air Blower Supply, Installation, Testing & Commissioning of Fresh air blower

Made out of M S Sheet, Direct driven motor of 1Hp, 3 Phase, 415V, of suitable capacities, mounted on a M S ...

Wet Venturi Scrubber Unit Supply, Installation, Testing & Commissioning of Scrubber Unit

Wet venturi scrubber unit with venturi arrangements made out of S S 304G sheets. In unit-1 smoke will c...

Exhaust Blower Supply, Installation, Testing & Commissioning of online-Exhaust Blower

Fabricated with an S S 304G sheet, the impeller driving shaft is also made out of S S with bearing suppo...

Erection Charge Erection charges for

Erection, testing, commissioning, handing over the cremation furnace

(a) Fixing of Frame, Main Door, Counterweight, Mechanical and

Electrical operating door s...

Transportation Charges Packing, Forwarding, Loading and Unloading charges from our factory in Banglore to the crematorium site.

Self-supporting chimney Supply, Installation, Testing & Commissioning of Self-supporting chimney

The chimney is made out of M S Plates, angles, flats, grouting bolts & gusset plates, ladder, platform ...

Mains Pipe. Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...

Mains Pipe. Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...

Mains Pipe. Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC c...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Modular switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.1)6Amps one way switch. PWD Ele SR 2023-24 Page No.8 Item ...

Modular socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.2)6A Two Way Socket PWD Ele SR 2023-24 Page No.8 Item c...

Modular 16Amp switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.7) 16A One Way Switch PWD Ele SR 2023-24 Page No.8...

Modular 16Amp Socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.10) 6/16A Universal Socket PWD Ele SR 2023-24 Page...

Stepped Fan Regulator. Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.4)Stepped Fan Regulator. PWD Ele SR 2023-24 Page...

TV/Telephone Socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.11) TV/Telephone Socket PWD Ele SR 2023-24 Page No....

32A DP Switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.9) 32A DP Switch PWD Ele SR 2023-24 Page No.8 Item code...

industrial plugs Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V PLUG 3.13.4 ) 32A PWD Ele SR 2023-24 Page No.8 Item code 3.13.4

industrial Socket Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET 3.13.8 ) 32A PWD Ele SR 2023-24 Page No.8 Item code 3.13.8

Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (E...

Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (E...

Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (E...

Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

LED Tube Fitting Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 22...

LED Tube Fitting Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 2...

Batten Holder Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 3.14.6) 6A Pendent PWD Ele SR 2023-24 Page No.9 Item code 3.14.6

Celling Rose Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 3.14.5) 6A Bakelite Ceiling Ro...

Fans 48” Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with doub...

Exhaust fan Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 6.2.2) 15" Sweep (450 mm) PWD Ele SR 2023-24 Page No.29 Item code 6....

LED Fitting fixing Charges Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters /girders using 23/0.0076...

Fan Fixing Charges Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with n...

Exhaust Fan Fixing Charges Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nut...

LED Fitting fixing Charges Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. PWD El...

MCB distribution boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capac...

MCB distribution boards Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capaci...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy crosswith Short circuit b...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

RCCB Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.. 5.20.10 ) 63 A 4 pole PWD Ele SR 2023-24 Page No.17 Item code ...

Grounding Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reduc...

GI strip GI/Copper strips for grounding connections, using necessary fixing materials as required 12.58.2) 25 x 3 mm GI strip PWD Ele SR 2023-24 Page No.53 Item code 12.58.2

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

MS Box Fabricating supplying and mounting MS box made out SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equi...

Bus Bar Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insu...

Angle iron Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approv...

MCCB Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

MCCB Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Change over switches Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 5.12.3 ) 125 A PWD Ele SR 2023-...

Earth leakage relay Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of per...

LED type panel board Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. PWD Ele SR 2023-24 Page No.18 Item code 5.38

Ammeter Supplying, fixing and wiring rotary selector switch suitable for Ammeter PWD Ele SR 2023-24 Page No.17 Item code 5.27

Voltmeter Supplying, fixing and wiring rotary selector switch suitable for VoltmeterPWD Ele SR 2023-24 Page No.18 Item code 5.28

LCD type display Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire...

Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per ...

Digital frequency meter Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30- 500V AC and optional or relay output for high/l...

MCCB Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

MCCB Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

MCB Switches. Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

Angle iron Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approv...

Capacitor Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 5.4.1 ) upto 5 Kvar PWD ...

Capacitor Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 5.4.2 ) 6 to 10 kVAR PWD...

Capacitor Supplying and fixing HRC fuse units base on existing switch / panel board. 5.9.2 ) 32 to 63 A PWD Ele SR 2023-24 Page No.14 Item code 5.9.2

Capacitor Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 13.17.1 ) upto 5 kVAR PW...

Capacitor Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 13.17.2.) 6 to 10 kVAR P...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.05) 2.5 to 25 Sqmm ESCOMs SR 2023-...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.06) 35 to 95 Sqmm ESCOMs SR 2023-...

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.01) 10 Sqmm ESCOMs SR 2023-24 Item code 60.01 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.02) 16 Sqmm ESCOMs SR 2023-24 Item code 60.02 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.06) 70 Sqmm ESCOMs SR 2023-24 Item code 60.06 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.07) 95 Sqmm ESCOMs SR 2023-24 Item code 60.07 (Material Cost)

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...

AMF panel Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom glan...

GI strip GI/Copper strips for grounding connections, using necessary fixing materials as required 12.58.6) 600 x 600 x 3 mm GI Plate PWD Ele SR 2023-24 Page No.54 Item code 12.58.6

GI strip GI/Copper strips for grounding connections, using necessary fixing materials as required

12.58.7) 25 x 3 mm Copper strip PWD Ele SR 2023-24 Page No.54 Item code 12.58.7

GI strip GI/Copper strips for grounding connections, using necessary fixing materials as required 12.58.11) 600 x 600 x 3 mm Copper plate PWD Ele SR 2023-24 Page No.54 Item code 12.58.11

Bus Bar Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insu...

Bus Bar Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insu...

MCCB Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

MCCB Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

CT Coil Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer PWD Ele SR 2023-24 Page No.18 Item code 5.36

Octagonal pole Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door ope...

M.S. bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.2) Single Arm Brack...

Flexible Multicore Cable Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation s...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc and fixing on existing wood or metal box using N.F. screws PWD Ele S...

Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD Ele SR 2023-24 Page No.13 Item code 5.7.2

Contactor Switch Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per ...

Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD Ele SR 2023-24 Page No....

PVC Pipe Supplying heavy gauge PVC conduit pipe...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concre...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...

Pot Head Sl No 35)Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable item no. 35.01) Up to 4C x 50 Sqmm ESCOMs SR 2023-24 (Material Charges)

6) Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles Item No.6(a)For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole ...

6) Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles Item No.6(a)For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole ...

6) Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding Item No.4(a)9M RCC Pole Hescom SR 2023-24 (Material Charges)

6) Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding Item No.4(a)9M RCC Pole Hescom SR 2023-24 (Material Charges)

9) 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS a) For RCC Pole For RCC Pole item no.9 a) ,Hescom SR 2023-24 (Material Charges)

9) 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS a) For RCC Pole For RCC Pole item no.9 a) ,Hescom SR 2023-24 (Material Charges)

6 ) Insulator as per IS-1445 for Ceremic, IS- 7935 for GI Pin, IEC-61109 for Polymeric 6.06 )11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) item no.6.06. Hescom SR 202-24 (Material...

6 ) Insulator as per IS-1445 for Ceremic, IS- 7935 for GI Pin, IEC-61109 for Polymeric 6.09 )1DISC Insulator 45 kN Porcelain item no.6.09. Hescom SR 202-24 (Material Charges)

12) Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 A) OPEN BUSHING TYPE 12.06)100 kVA, Aluminium Wdg, Star 2 (5 Star) item no.12.06) Hescom...

8) Erection of Transformer & Structures 8.02)Erection of 100 kVA Transformer item no8.02) page no.3 Hescom SR 2023-24 (Labour Charges)

24) GOS as per IS-9921, IS-1977 24.01) 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) item no. 24.01) Hescom SR 2023-24 (Material Charges)

13) Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., 13.02) Fixing of GOS including wiring (11 kV Single Break 200 Amps). item no. 13.02) Hescom SR 2023-24 ...

24) GOS as per IS-9921, IS-1977 Item No 24.07) H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) -GI Item No.24.07 Hescom S...

4) Erection of Single Pole Mounted Transformer Structure For 100 kVA on the existing 9 Mtr RCC Pole (Squre Section) (excluding erection of Pole) item No.4.05 Hescom SR 2023-24 (Labour Charges)

68) Miscellaneous Materials 68.17) Caution/Danger Board item no. 68.17 ) Hescom SR 2023-24 (Material Charges)

5) Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.15) Fixing Danger Board item no. 5.015 ) Hescom SR 2023-24 (Labour Charges)

7) ACSR Conductor as per IS-398 (Part - 2/1996) 7.02 )Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Item no 7.02 Hescom SR 2023-24 ...

6) Stringing of Conductor 6.02) Stringing of conductor Rabbit ACSR binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.Item no 6.02 Hescom SR ...

4 ) Anti Climbing Device 4.02) GI Barbed wire (12 Mtr/Kg) item no. 4.02) page no. 3 Hescom SR 2023-24 (Material Charges)

5) Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.09) GI Barbed Wire (12 Mtr) item no. 5.09) Hescom SR 2023-24 (Labour Charges)

8) Guy Wire & GI Wire as per IS-2141 item no.8.02) 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM Hescom SR 2023-24 (Material Charges)

5)Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc 5.10) Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire ...

19 )Lightning Arrester as per IEC-60099-4 Item No 19.01) 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) Hescom SR 2023-24 ...

13) Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,13.06) Fixing of 3 Nos Lightning Arrestor including wiring Hescom SR 2023-24 (Labour Charges)

17) LT Protection Item No 17.01) LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) Hescom SR 2023-24 (Material Charges)

15) Street Light and Other Works Item No 15.03) Fixing of LT Protection Kit Hescom SR 2023-24 (Labour Charges)

49) 1.1 KV Class HR (Heat Resistant) PVC Insulated and UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 Item No) 49.04 PVC Wire - 50 Sqmm Al Wt: 13.8 Kg, Total Wt:...

60) Aluminium End Terminal (Lug)Item No) 60.05) 50 Sqmm Hescom SR 2021-22 (Material Charges)

9) PG Clamp 9.02) Rabbit to Rabbit Page No 3 Hescom SR 2023-24 (Material Charges)

31 ) LT Line Spacer 31.01) For 4 Wire Hescom SR 2023-24 (Material Charges)

15) Street Light and Other Works 15.04 ) Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary s...

64 )For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring

Clamps, B&N and all other accesso...

15) Street Light and Other Works 15.02) Fixing of LT Metering Box with clamping arrangement for

mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for hou...

20 ) HG Fuse Unit as per IS-5350 Part-2 item no.20.01 ) 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/ GM/QS&S/21 Dtd 24.11.2018 Hescom SR 2023-24 (Material Charges)

13) Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., 13.02) Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring item no. 13.01) Hescom SR 2023-24 (La...

36) 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 36.01) 95 Sqmm, (54 GI Wires - 2...

21) Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, 21.01) 3x95 to 150 Sqmm Hescom SR 2023-24 (Labour Charges)

36) 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 45.07) 3x95 Sqmm Page No 10 Hescom SR 2023-24 (Material Charges)

22) Cable Joint and wiring (for HT & LT UG Cable) HT UG Cable Making and Fixing pot head for HT Cable only Heat shrinkable Type Terminations 22.04 ) 3x95 to 3x150 Sqmm Hescom SR 2023-24 (Labour C...

68) Miscellaneous Materials 68.02 )RCC Hume Pipe 2000 mm long 200 mm Dia Hescom SR 2023-24 (Material Charges)

68) Miscellaneous Materials 68.02 )Collars for RCC Hume Pipe 150 mm Dia Hescom SR 2023-24 (Material Charges)

28) Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete 28.06 ) RCC Pipe Hescom SR 2023-24 (Labour Charges)

49) GI Pipe, 150 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB COST DATA SHEET - 23 Hescom SR 2023-24 (Material Charges)

52 ) Alkathine tube 52.01 ) Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr Hescom SR 2023-24 (Material Charges)

26) Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD S...

26) Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD S...

26) Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD S...

General Cleaning : Clearing the area by sweeping / removing unwanted materials such as dry leaves, garbage etc., Horticulture Department FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 2...

Red Earth: (Garden Soil) P.No. 61 SI.No 1(*) Garden Soil Laying for ground leveling and forming.FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No: 1.2(a) Page No. 1.

Lawn : Developing First grade Mexican lawn by cleaning the site and initial earth work excavation of soil to minimum of depth for 0.3m in all type of soil, removing debris unwanted growth etc and fill...

Planting of Hedges: Developing hedges by digging trenches of size 0.45M x 0.45M filling 50 with the mixture of sand (0.01112 cum) FYM (0.0224 cum) red earth (0.0336 cum) (i.e.in the proportion of 1:2:...

Cost of Hedges Plants : 1) Durantha Plant, 2) Irantimum Plant, 3) Akelifa timma plant,4) Akelifa Godreg, Etc., Approved Rate 2015-16

Planting of Trees: Digging of pits o size 0.75m x 0.75 x 0.75m and filling up to 50% of the pits with top excavated soil and remaining 50% with sand (0.035cum) F.Y.M. *0.070cum) red earth (0.105 cum...

Cost of Tree Plants: Areca Palm, 2) Royal Palm, 3) Faicus Beneginam, 4) Faicus Starlight Etc., Approved Rate 2015-16

Planting of Shrubs : Digging pits of size 0.45 x 0.45 M x 0.45 M, filling up to 50%of the pits with top excavated soil and remaining 50% with the mixture of sand (0.014 Cum) Red Earth (0.021 Cum) (i.e...

Cost of Shrub Plants: 1) Ixora plants ,2) Hybiscuous plants 3) Iporbiya plants, 4) Jathropa plants, 5)Sang of India plants, 6)Dust miller plants, Etc., Approved Rate 2015-16

4ft RCC Benches:Providing and laying surface mount rainforcement bench confirming to RDSO spect without Arm rest and Back support with material specification of RCC M-30 grade concrete mix in accordan...

Garden Maintenance FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I No.12.11(a) page no 51 (From Upto 8000.0 sqm (2.0 Acres) 3600x12=43200 Watering: The plants and lawns in t...

Construction of Gas Crematorium at Belagavi CC under UIDF scheme

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution lights, including...

Providing and injecting chemical emulsion for Preconstructional Anti Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(SR Page 9 iteam 5.4 (Volume-2)

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing and laying Cement concrete pavement with 1:2:4 for commercial and residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal si...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...

Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine a...

Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine a...

Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine a...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10Sqm over and including priming coat of exterior primer applied 2.20 kg/10 Sqm) with paint ...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete ...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcaniz...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD SR 2023 24(P.No.105/12.6...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete..(PWD SR 2023 24(P.No.105/12.61) (Volume2)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD SR 2023 24(P.No.105/12.62) (Volume2)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(PWD SR 2023 24(P.No.105/12.64) (Volume 2)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type)(PWD SR 2023 24(P.No.107/12.75.1) (Volume 2)

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm(PWD SR...

Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring ...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charg...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all complete. Fixed to steel ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied 0.90L/10 Sqm over an under coat of primer applied 0.80 L/10 Sqm of approved brand and manufacture including...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. S.R Page No117 I,.No.13.14 (Volume2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved qualitya. 32mm.dia.. (screwed end) :Page No115,Item No13.4.2 (Volume2)

Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specification.Page N...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and constructing un-reinforced plain cement

concrete pavement, thickness as per design, over a prepared

sub base, with 43 grade cement or any other type as per

Clause 1501.2.2 M30 (Grade), c...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 and IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA and for Resident...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

Sand Filling in Wells complete as per Drawing and Technical Specifications. (UNI SR 2023 24 ( Vol 3 P.No.112/11.36)

Providing and constructing load bearing wall with concrete solid blocks having block ebsity not less than 1800 kg/Cum Having aq minimum average compressive strength of 5.00 N.Sqmm confirming to IA 218...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part I)1988 and IS 12592 (part II) 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing...

Providing 20mm square M.S.Footrest and fixing in manhole with 1:3:6 cement concrete block of 20x20x10 cms using 20mm an ddown size metal of size including cost of materials, labour charges, curing com...

Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....

Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...

Granular Sub Base (By Mix in Place Method)

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place ...

Providing and constructing un reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (SR page no121, Item No13.24 (Volume2)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer in charge. SR page no-135, Item No14.22A (Volume2)

Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms (SR page no120, Item No 13.21.1 (Volume2)

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificati...

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificati...

Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificatio...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. Page No 121,Item No13.26 (Volume2)

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing bright finished brass hard drawn hooks and eyes :300mm Page No 200,Item No20.29.1 (Volume2)

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes...

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes...

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes...

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixi...

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixi...

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixi...

Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour , HOM of equip...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :a. 25mm.dia.. Page No117,Item No13.53.3 (Volume2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (32mm.dia.):Page No117,Item No13.4.2 (Volume2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (40mm.dia.):Page No117,Item No 13.4.3 (Volume2)

Providing and fixing in position below given nominal bore gun metal non return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specification.a. 40m...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet an...

Providing and fixing PTMT grating of approved quality and colour. a. 125mm dia.Page No120,Item No13.22.1.2 (Volume2)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. Page No201,Item No-20.40 (Volume...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qual...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (PWD C...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl and Impeller with Low volt Motor as per specifications,as per ...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR2023-24/VOL-5/Pg No-154/13.24 ) SIZE 50 MM

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR2023-24/VOL-5/Pg No-154/13.25) SIZE 50 MM

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wi...

Mains Pipe.Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC c...

Mains Pipe.Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...

Mains Pipe.Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...

Metal modular box:Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary raw...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

modular Switch Plate:Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ...

Modular 16Amp switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ...

Modular 16Amp Socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ...

Stepped Fan Regulator.

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.4)Stepped Fan Regulator. ...

TV/Telephone Socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.11) TV/Telephone Socket ...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.9) 32A DP Switch ...

industrial plugs

Supplying and fixing of metal clad industrial plugs and sockets. 3pole earth 440V PLUG 3.13.4 ) 32A PWD Ele SR 2023-24 Pa...

industrial Socket

Supplying and fixing of metal clad industrial plugs and sockets. 3pole earth 440V SOCKET 3.13.8 ) 32A PWD Ele SR 2023-24 Page No.8 Item code 3.13.8

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (P...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (P...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (P...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...

LED Tube Fitting

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and

70% lumen maintenance with CRI 80. Power Input: 22...

LED Tube Fitting

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and

70% lumen maintenance with CRI 80. Power Input: 220...

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board. 3.14.6) 6A Batten Holder ...

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board. 3.14.5) 6A Bakelite Ceiling Ro...

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 6.2.2) 15...

LED Fitting fixing Charges

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters /girders using 23/0.0076...

Fan Fixing Charges Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and S hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with nece...

Exhaust Fan Fixing Charges Fixing one exhaust fan after making a suitable notch in the wall

and finishing with cement mortar and colouring to match the

existing wall or brackets, with bolts and nuts ...

LED Fitting fixing Charges

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over

existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. PWD El...

MCB distribution boards

Supplying and fixing regular MCB distribution boards on wall

/ wood board / flush mounting using required clamps bolts,

nuts etc., with provision for fixing suitable type capac...

MCB distribution boards

Supplying and fixing regular MCB distribution boards on wall

/ wood board / flush mounting using required clamps bolts,

nuts etc., with provision for fixing suitable type capac...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circui...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circui...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross3 with Short circuit...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circui...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circui...

Supplying fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit

Supplying, fixing and wiring Residual current circuit breaker

(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board..

PWD Ele SR 2023 24 Page No.17 Item code...

Supplying fixing and wiring earth electrode for grounding of lifts,

transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reduc...

GI/Copper strips for grounding connections, using necessary fixing materials as required

12.58.2) 25 x 3 mm GI strip

PWD Ele SR 2023-24 Page No.53 Item code 12.58.2

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit...

MS Box Fabricating supplying and mounting MS box made out SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equi...

Supplying A rated 3phase with neutral bus bar using

required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator whic...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pain...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Change over switches

Supplying of on load change over switches 4 poles, AC

23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM

Enclosure Sheet Metal Execution)

PWD Ele SR 2023-...

Earth leakage relay

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of per...

LED type panel board

Supplying and fixing of LED type panel board indicating lamp

with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

PWD Ele SR 2023 24 Page No.18 Item code 5.38

Supplying, fixing and wiring rotary selector switch suitable for

PWD Ele SR 2023 24 Page No.17 Item code 5.27

Supplying, fixing and wiring rotary selector switch suitable for

PWD Ele SR 2023 24 Page No.18 Item code 5.28

LCD type display

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire...

Contactor Switch

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per

Digital frequency meter

Supplying and fixing digital frequency meter with latest micro

controller technology, ultra bright 4 digit LED display, from 30-

500V AC and optional or relay output for high/l...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circui...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approv...

Fixing a shunt capacitor of ... kVAR capacity with necessary

clamps, bolts, and nuts on existing wooden or metal board

including banking of more than one capacitor.

5.4.1 ) upto 5 kVAR

Fixing a shunt capacitor of ... kVAR capacity with necessary

clamps, bolts, and nuts on existing wooden or metal board

including banking of more than one capacitor.

5.4.2 ) 6 to 10 kVAR

Supplying and fixing HRC fuse units base on existing switch /

PWD Ele SR 2023-24 Page No.14 Item code 5.9.2

Fixing a shunt capacitor of ... kVAR capacity with necessary

clamps, bolts, and nuts on existing wooden or metal board

including banking of more than one capacitor.

13.17.1 ) upto 5 kVAR

Fixing a shunt capacitor of ... kVAR capacity with necessary

clamps, bolts, and nuts on existing wooden or metal board

including banking of more than one capacitor.

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1)...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1)...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1)...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1)...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as ...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as ...

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug)

60.01) 10 Sqmm ESCOMs SR 2023-24 Item code 60.01 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug)

60.02) 16 Sqmm ESCOMs SR 2023-24 Item code 60.02 (Material Cost)

Aluminium End Terminal (Lug)60) Aluminium End Terminal (Lug) 60.06) 70 Sqmm ESCOMs SR 2023-24 Item code 60.06 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.07) 95 Sqmm ESCOMs SR 2023-24 Item code 60.07 (Material Cost)

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 and IS 1002/I...

Supply, Erection, testing and commissioning of AMF panel

suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom glan...

GI/Copper strips for grounding connections, using necessary fixing materials as required

12.58.6) 600 x 600 x 3 mm GI Plate

PWD Ele SR 2023-24 Page No.53 Item code 12.58.6

GI/Copper strips for grounding connections, using necessary fixing materials as required

12.58.7) 25 x 3 mm Copper strip

PWD Ele SR 2023 24 Page No.53 Item code 12.58.7

GI/Copper strips for grounding connections, using necessary fixing materials as required

12.58.11) 600 x 600 x 3 mm Copper plate

PWD Ele SR 2023 24 Page No.53 Item code 12.58.11

Supplying A rated 3phase with neutral bus bar using

required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator whic...

Supplying A rated 3phase with neutral bus bar using

required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator whic...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection...

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA

Burden class 1 Current Transformer

PWD Ele SR 2023 24 Page No.19 Item code 5.36

Octagonal pole Fabricating, supplying and erection of ... ms long hot dip

Galvanized Octagonal hot dip Pole with BSEN 10025 ...

M.S. bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Oc...

Flexible Multicore Cable Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper w...

Supply of LED Streetlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with

necessary nitches for fixing switches, regulators etc., a...

Fuses Supplying and fixing of Porcelain fuse channel with cut out

on existing wooden/panel using necessary nuts, bolts and

Contactor Switch Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board u...

Timer Switch Supplying and fixing Microprocessor based Electronic timer

(without contactor, Din Mounting using neces...

PVC Pipe Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, me...

for 1.1 kV, LTUG Cab...

Earth Work Earth work excavation by manual means for drains, canals, waste weir, draft...

Base Concerete Providing and laying in position Cement Concrete for levelling course for all works in foundatio...

TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all ma...

Concerete Providing and laying in position Reinforced cement concrete for all foundation works. The g...

Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts and nuts and washers including 2 No of Poles Item No.6(a)For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole ...

6) Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding Item No.4(a)9M RCC Pole Hescom SR 2023-24 (Material Charges)

Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts and nuts and washers including 2 No of Poles Item No.6(a)For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole 9...

Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding Item No.4(a)9M RCC Pole Hescom SR 2023 24 (Labour Charges)

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts and washers MS a) For RCC Pole For RCC Pole item no.9 a) ,Hescom SR 2023 24 (Material Charges)

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts and washers MS a) For RCC Pole For RCC Pole item no.9 a) ,Hescom SR 2023-24 (Labour Charges)

Insulator as per I 1445 for Ceremic, IS

7935 for GI Pin, IEC 61109 for Polymeric 6.06 )11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) item no.6.06. Hescom SR 202 24 (Material Charg...

Insulator as per IS 1445 for Ceremic, IS

7935 for GI Pin, IEC 61109 for Polymeric 6.09 )1DISC Insulator 45 kN Porcelain item no.6.09. Hescom SR 202 24 (Material Charges)

Distribution Transformer 3 Phase, 11kV/433V Stacked CRGO Core with Oil as per IS 1180 (Part 1): 2014 A) OPEN BUSHING TYPE 12.06)100 kVA, Aluminium Wdg, Star 2 (5 Star) item no.12.06) Hescom SR 202...

Erection of Transformer and Structures 8.02)Erection of 100 kVA Transformer item no8.02) page no.3 Hescom SR 2023 24 (Labour Charges)

GOS as per IS 9921, IS 1977 24.01) 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QSandS/23 Dtd 24.11.2018) item no. 24.01) Hescom SR 2023 24 (Material Charges)

Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., 13.02) Fixing of GOS including wiring (11 kV Single Break 200 Amps). item no. 13.02) Hescom SR 2023 24 (Labour Charges)

GOS as per IS 9921, IS 1977 Item No 24.07) H Frame Set for fixing 11 kV, 200 Amps Single Break GOS (For DP structure for providing New GOS for sectionalisation) GI Item No.24.07 Hescom SR 2021 22...

Erection of Single Pole Mounted Transformer Structure For 100 kVA on the existing 9 Mtr RCC Pole (Squre Section) (excluding erection of Pole) item No.4.05 Hescom SR 2023-24 (Labour Charges)

Miscellaneous Materials 68.17) Caution/Danger Board item no. 68.17 ) Hescom SR 2023-24 (Material Charges)

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.15) Fixing Danger Board item no. 5.015 ) Hescom SR 2023-24 (Labour Charges)

ACSR Conductor as per IS-398 (Part - 2/1996) 7.02 )Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Item no 7.02 Hescom SR 2023-24 ...

Stringing of Conductor 6.02) Stringing of conductor Rabbit ACSR binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.Item no 6.02 Hescom SR 202...

Anti Climbing Device 4.02) GI Barbed wire (12 Mtr/Kg) item no. 4.02) page no. 3 Hescom SR 2023-24 (Material Charges)

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.15) GI Barbed Wire (12 Mtr) item no. 5.15 ) Hescom SR 2023-24 (Labour Charges)

Guy Wire and GI Wire as per IS-2141 item no.8.02) 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM Hescom SR 2023-24 (Material Charges)

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc.,5.10) Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire w...

Lightning Arrester as per IEC-60099-4 Item No 19.01) 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QSandS/26 Dtd 24.10.2007) Hescom SR 2023-24 (M...

Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,13.06) Fixing of 3 Nos Lightning Arrestor including wiring Hescom SR 2023-24 (Labour Charges)

LT Protection Item No 17.01) LT Protection Kit (Dwg No. BESCOM/GM/QSandS/10 Dtd 24.11.2018) Hescom SR 2023-24 (Material Charges)

Street Light and Other Works Item No 15.03) Fixing of LT Protection Kit Hescom SR 2023-24 (Labour Charges)

1.1 KV Class HR (Heat Resistant) PVC

Insulated and UnSheathed Aluminium Wires

Multistrand Single Core Lead wires as per

IS-694 2010 Item No) 49.04 PVC Wire 50 Sqmm Al Wt 13.8 Kg, Total Wt 22 Kg/1...

Aluminium End Terminal (Lug)Item No) 60.05) 50 Sqmm Hescom SR 2021-22 (Material Charges)

PG Clamp 9.02) Rabbit to Rabbit Page No 3 Hescom SR 2023-24 (Material Charges)

LT Line Spacer 31.01) For 4 Wire

Hescom SR 2023-24 (Material Charges)

Street Light and Other Works 15.04 ) Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary suppo...

For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring

Clamps, BandN and all other accessori...

Street Light and Other Works 15.02) Fixing of LT Metering Box with clamping arrangement for

mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for housing...

HG Fuse Unit as per IS-5350 Part-2 item no.20.01 ) 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/ GM/QSandS/21 Dtd 24.11.2018 Hescom SR 2023-24 (Material Charges)

Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., 13.02) Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring item no. 13.01) Hescom SR 2023-24 (Labour ...

11 kV, 3 Core, XPLE HTUG Cable with

pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 36.01) 95 Sqmm, (54 GI Wires - 2.5 m...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, 21.01) 3x95 to 150 Sqmm Hescom SR 2023-24 (Labour Charges)

11 kV, Jointing and Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 45.07) 3x95 Sqmm Page No 10 Hescom SR 2021-22 (Material Charges)

Cable Joint and wiring (for HT and LT UG Cable) HT UG Cable Making and Fixing pot head for HT Cable only Heat shrinkable Type Terminations 22.04 ) 3x95 to 3x150 Sqmm Hescom SR 2023-24 (Labour Char...

Miscellaneous Materials 68.02 )RCC Hume Pipe 2000 mm long 200 mm Dia Hescom SR 2023-24 (Material Charges)

Miscellaneous Materials 68.02 )Collars for RCC Hume Pipe 150 mm Dia Hescom SR 2023-24 (Material Charges)

Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete 28.06 ) RCC Pipe Hescom SR 2023-24 (Labour Charges)

GI Pipe, 150 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB COST DATA SHEET - 23 Hescom SR 2021-22 (Material Charges)

Alkathine tube 52.01 ) Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr Hescom SR 2023-24 (Material Charges)

Concreting with Material and Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR ...

Concreting with Material and Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR ...

Concreting with Material and Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1 2 4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR ...

Main Furnace-Supply of fabricated Main Furnace: Supply of Fabricated main frame for housing refractory bricks and other equipment, Furnace the main door, Furnace supporting frame, Main door lifting me...

Supply of Refractory Materials-Supply, Installation, Testing, and Commissioning of refractory items such as ceramic fiber blankets, insulation bricks, Hot Zone bricks (IS8), Cold Zone bricks (IS6), bo...

Gas Fired System-Supply of Gas Fired System

Gas burners (REILO make 160KW or any other standard make) of fully automatic in operation and Suitable for cremation in all respect. Having 4 nos in the cha...

Body Charging Trolley-Supply, Installation, Testing, and Commissioning of Body Charging Trolley

Supply of fabricated Hydraulically operated Body Charging Trolley with power pack and connecting pipelin...

Electrical Remote Control Panel-Ectrical Remote control panel

Main incoming switch (MCCB), Motor operating contractors with MCB / relay, indicating lamps, pushbuttons, voltmeter, Ammeter, temperature ...

Control and Power cables-Control and Power Cables

The control and power cables laying and termination to connected equipment of furnace, Including isolators near the equipment as per Electrical inspec...

Water Pump-Supply, Installation, Testing, and Commissioning of Water pump Supply of water pump for scrubber unit.

1 Hp motor, 3 Phase, 415V, for circulating the water in wet venture scrubber unit and ...

Fresh Air Blower-Supply, Installation, Testing, and Commissioning of Fresh air blower made out of M S Sheet, direct driven motor of 1 Hp, 3 Phase, 415V, of suitable capacities, mounted on a M S rigid ...

Wet Venturi Scrubber Unit-Supply, Installation, Testing, and Commissioning of Scrubber unit

Wet scrubber unit with venturi arrangements made out of S S 304G sheets. In unit-1 smoke will completely com...

Exhaust Blower-Supply, Installation, Testing, and Commissioning of online-Exhaust Blower Fabricated with an S S 304G sheet, the impeller driving shaft is also made out of S S with bearing support moun...

Erection, installation, and commissioning Charges-Erection charges for

Erection, testing, commissioning, handing over the cremation furnace

(a) Fixing of Frame, Main Door, Counterweight, Mechanical an...

Transportation Charges-acking, forwarding, Loading, and Unloading charges from our factory in Bangalore to the crematorium site.

Self-supporting chimney-Supply, Installation, Testing, and Commissioning of

Self-supporting chimney.

The chimney is made out of M S Plates, angles, flats, grouting bolts and gusset plates, ladder, pla...

FIRE EXTINGUSHER, firequip Portable Fire Extinguishers as per IS 15683 (2018) High Pressure Extinguisher (Service Pressure 19 bar) Carbon Dioxide Based (as per IS 15222) Class -B, 4.5kg

LPG / PNG GAS CYLINDERS, LPG / PNG gas cylinder 14.2kg as per specification

General Cleaning Clearing the area by sweeping / removing unwanted materials such as dry leaves, garbage etc., Horticulture Department FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 202...

Red Earth (Garden Soil) P.No. 61 SI.No 1(*) Garden Soil Laying for ground leveling and forming.FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I.No 1.2(a) Page No. 1

Lawn : Developing First grade Mexican lawn by cleaning the site and initial earth work excavation of soil to minimum of depth for 0.3m in all type of soil, removing debris unwanted growth etc and fill...

Planting of Hedges: Developing hedges by digging trenches of size 0.45M x 0.45M filling 50% with the mixture of sand (0.01112 cum) FYM (0.0224 cum) red earth (0.0336 cum) (i.e.in the proportion of 1:2...

Cost of Hedges Plants : 1) Durantha Plant, 2) Irantimum Plant, 3) Akelifa timma plant,4) Akelifa Godreg, Etc., Approved Rate 2015-16

Planting of Trees: Digging of pits o size 0.75m x 0.75 x 0.75m and filling up to 50% of the pits with top excavated soil and remaining 50% with sand (0.035cum) F.Y.M. 0.070cum) red earth (0.105 cum) ...

Cost of Tree Plants: Areca Palm, 2) Royal Palm, 3) Faicus Beneginam, 4) Faicus Starlight Etc., Approved Rate 2015-16

Planting of Shrubs : Digging pits of size 0.45 x 0.45 M x 0.45 M, filling up to 50%of the pits with top excavated soil and remaining 50% with the mixture of sand (0.014 Cum) Red Earth (0.021 Cum) (i.e...

Cost of Shrub Plants: 1) Ixora plants ,2) Hybiscuous plants 3) Iporbiya plants, 4) Jathropa plants, 5)Sang of India plants, 6)Dust miller plants, Etc., Approved Rate 2015-16

Providing and Fixing Garden RCC Benches

Garden Maintenance FOREST/HORTICULTURE/WATERSHED DEPARTMENT Common Sanctioned SR 2022-23 I No.12.11(a) page no 51 (From Upto 8000.0 sqm (2.0 Acres) 175x12=2100 ...

Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixi...