Urgent shifting of the 200 mm dia Manora taping and pipeline approaching in the alignment of the proposed 1200 mm dia new MS pipeline under Salaulim Water Supply Scheme.

Gas cutting (either square cut or V cut) pipes plates etc. of thickness.;Above 10 mm upto 14 mm dia.

Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate;M.S.spigot tail piece suitable for connectiong M.S pipeline with C.I./D.I pipeline

Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 25 mm thick Plate;Flanges

Providing & applying primer and one coat of Red Oxide of iron paints internally including cleaning the surface of pipes with steel scrappers wire brushes and metal cleaning solution etcas per the direction of engineer -in- charge.

Providing and applying primer coat or of fibres coal tar and solvent based rubber modified bituminous primer of density 0.92 gm/cu. cm. and viscosity of 1000-2000 cps @ 150 gms/Sqm followed by seven layers ( 4 mm thick ) of polythene polymerised bitumen ester of local 7 layers pipe coat 4 mm should conform to requirement of IS :10221 and AWWA C-203 for prefabricated tapes including Cost of material for coating and wrapping handling charges preparation of pipe surface all labour machinery etc. complete.

Supplying at store or site of work including railway freight carting loading unloading stacking etc. Ductile iron Sewage double flanged manually operated Sluice Valve generally conforming to IS : 14846 - 2000 having body door dome gland in graded cast iron to IS:210 Gr. FG 260 four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 IS 6603 GR 12 CR 12 spindle Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and gear box. and back seat bush.) TYPE P.N. 1.6 (Class A );Dia in mm;200

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;200

Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .;Nominal Diameter in mm;200

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.;All kinds of soil

Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints;Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes.