Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC RZF 498 MG MARG RAJ NAGAR II PALAM DELHI CANTT 110077 | NEW DELHI | DELHI | 110077 | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹43.8 L+₹2.9 L (6.97%)Rejected-AOC | L2 | Rejected-AOC Higher rate | |
| 3 | L3₹44.9 L+₹4.0 L (9.71%)Rejected-AOC PLOT NO 26 1ST FLOOR PRATAP NAGAR NEAR JAIL ROAD NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L3 | Rejected-AOC Higher rate |
Tender Value
Refer Docs
EMD Value
₹88,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND-62/2022-23 ADDN/ALTN OF TECH LIBRARY AT KASHMIR HOUSE, E IN C BRANCH UNDER GE NEW DELHI
2022_MES_558216_1
GE/ND-62/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE NEW DELHI
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹88,000
Yes
28 Feb 2023
17 Oct 2022
16 Nov 2022
17 Oct 2022
14 Nov 2022
31 Oct 2022
Amount
M&L for Sound Dampener 12mm 1218x1218 mm made of 10 mm compressed wood cement composites 1250Kg/m3 and 2mm dampener sheet. (37 STC ). To be installed on Wooden studs on which the panels are mechanically screwed on size 47x47mm fire and termite resistant hardwood studs spaced at 600x600mm centre to centre with infill of 50mmx1000 GSM thick absorb wool tested as per Fire Retardant ASTMD 635-1991 and IS 15061-2002 for excellent results. All the joints needs to be properly sealed with special Acoustic sealant thus giving an STC upto 40.
M&L for Elegant Tile made of perforated cement fiber composite 595x595/295X1195 /595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results.
M&L for Gloss Tile made up of 'Woodfiber cement composite' 20 mm thick composites covered with Acoustically Transparent Absorptive microfibers on the front side 20mm thick on the front side with an option of colors of size 600X600/600X1200 mm having excellent noise absorption of 0.90 NRC as per ISO:354-, Density 400 Kg/ m3 , Fire Ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated. Installed with Aluminium H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results.
M&L for Woodlot FR Grades of size 2430x131x16mm made of exterior grade HDF backed with acoustical having excellent noise absorption 0.88 NRC as per ISO 354. 15mm Aluminium profile conforms to Aluminium Alloy 6063-T 6.Temper as per BS: 1474- 1987 and G.I Lock in clips on the back of tongue and Groove system. Density per panel is 750-800 kg/m3 . The panels come with tongue & groove for seamless patterns, 4-28mm Groove and visible panel. The perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results.
Supplying and Fixing of ISO Block 666x500x100mm, weight 31Kg per panel 3 of Density 950Kg/m made of compressed Gypsum with togue and groove. System fixed with fast drying jointing compound. Achieves sound reduction of upto 46.75 STC tested as perASTMDE-90.The wall can also be finished with POP Finish after the installation, with a backing of50mm thick, 1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/ Insulation and IS 15061-2002 for excellent results.
Supplying and fixing of Acoustic Door of 56 mm having an STC rating up to 50. The Door will be filled with high acoustic materials of 2 layers of 8 mm Water Proof Acoustic Ply with Dampener Sheet, 2 Layers of 10mm thick Absorb Wool 300 GSM, Sound Dampener 12mm 1218x1218 mm made of 10 mm compressed wood cement composites 1250Kg/m3 and 2mm dampener sheet 37 STC as per ISO 140 ( part III) - 1995. Final Finish with Teak Ply 4mm thick interior and Exterior Side. The door frame will be made of Engineered wood/ teak wood . Frame on all four sides or three sides frame and drop seal below will be provided along with the door. High load-bearing hinges will be provided along. Fire-resistant for 120 min as per IS 36 (4Part -II) & (Part 20 & 22). Door Accessories: Door Closer, Door H-Type Pull Handle, Outdoor Liver ( Trim Lock)
S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters including necessary moulding work on doors, windows, pillars and opening etc complete all as directed at site . Make:- ECOCELL/Rajshri/Polyline Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.
M&L for providing and fixing False ceiling at any height with semi perforated 12mm thick micro tegular edge GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.85 (with 50mm thick glass wool) as per IS 8225 :1987, Non-combustible as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level or in slope as per site requirement suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) Comprising of main - T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32m of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000nn length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wass SS screws. The work shall be carried out as per specifications, drawing and as per direction of Engineer-in-Charge complete all as specified and directed. Make: Diamond Ceiling/Brand TM/Shera/Maruti Gypsum/Gypcore.
S&F powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size Make of glass (MODI/FLOAT/ATUL).
S&F powder coated aluminium partition using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make OF GLASS : MODI/ FLOAT/ ATUL).
Demolition of PCC in ground Floors not exc. 15cm thick below or above ground level complete all as specified and as directed.
Mel for 25m thick PCC 1:2:4 type B-0 (Using 20mm graded aggregate) as in floors etc complete all as specified and as directed.
M&L vitrified ceramic tiles light shade 10 mm thick(Square/Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cm 1:6. complete all as specified and directed.
S&F for 8mm laminated HDF wooden flooring interlocked each other over 6micron polyethylene sheeting over the concrete surface to minimize moisture migration from the concrete. Colour/Shade of wooden flooring as approved by the GE.
Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 m mean radius in CM 1:4 complete all as specified and directed.
Demolition of cement concrete unreinforced of any description and in any position complete all as specified and as directed
S&F Joist, channel, angle, or tee sections, confirming to (Gde E-250 Quality A) quality fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary form work of height upto 2 storey complete all as specified and directed
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including necessary form work of height upto 2 storey complete all as specified and as directed.
S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment confirming to Fe 410W gde 250 A quality complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and as directed.
Excavating in trenches, n exc. 1.5 m wide and n exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc. 10 sq. m on plan and n exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed
M&L for PCC (1:4:8) type D-2 (Using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for reinforced cement concrete (Design mix m-25) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for Formwork to sides Rough finished flat concrete of surfaces as in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm as in soft/loose soil complete all as specified and as directed.
M&L for Removing excavated material exc. 1.50KM but n exc. 5 KM and depositing where directed at a level n exc. 1.5 m above the starting point as in soils complete all as specified and directed.
M&L for TMT bar bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for 20mm dia of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm but n exc. 30cm long complete all as specified and directed
M&L for preparation of newly plastered surfaces on walls and applying two coats of OBD over 3mm thick wall care putty on walls complete all as specified and as directed.
M&L for Cutting holes of area exe 150 sq.cm. but n. exc. 400sqcm into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.
S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc and edge shall be covered with PVC tape all as directed by Engr-in-Charge , working station etc Make: Kitply/M/s Green Ply
Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes complete all as specified and as directed.
Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly drawing through PVC concealed conduit but including provision of new galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators for the following :-
One light/fan point controlled by one No., one way switch.
One 6 Amp socket outlet point controlled by one No., one way switch on same board
One 6 Amp socket outlet point controlled by one No., one way switch on independent board
One 16 Amp socket outlet point controlled by one No., one way switch on independent board with cable of size 2.5 sqmm 1100 Volts including one run of size 1.5 sqmm as earth continuity conductor complete all as specified and as directed. Note : - . (i) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (ii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.
S&F in replacement modular switch 1 way 6 Amp, SP, one module 230 volts AC complete all as specified and as directed.
S&F in replacement modular switch 1 way 16 Amp, SP, one module 230 volts AC complete all as specified and as directed.
S&F in replacement modular socket outlet 2/3 pin combined 6 Amp, 230 volts two module AC complete all as specified and as directed.
S&F in replacement modular socket outlet 2/3 pin combined 6/16 Amp, 230 volts two module AC complete all as specified and as directed.
S&F in replacement modular type electronic fan step regulator 120W, modular type 2 module complete all as specified and as directed.
S&F 15-Watt Smart Wi-Fi LED Ceiling Lamp Downlighter WiZ Connected (Shades of White + Dimmable + Pre-Set Modes) (Compatible with Amazon Alexa and Google Assistant) (Pack of 1) warm white downlighter 15 watt white colour pvc body aluminium powder coated suitable to give glare free lights downlighter 15 watt warm white complete all as specified and directed Make: Philips/Jaquar
S&F 10-Watt Smart Wi-Fi LED Ceiling Lamp Downlighter WiZ Connected (Shades of White + Dimmable + Pre-Set Modes) (Compatible with Amazon Alexa and Google Assistant) (Pack of 1) warm white downlighter 15 watt white colour pvc body aluminium powder coated suitable to give glare free lights downlighter 10 watt warm white complete all as specified and directed Make: Philips / Jaquar
S&F warm white picture lights 8 watt white colour pvc body aluminium powder coated suitable to give glare free lights complete all as specified and directed
S&F 28W LED Warm White Strip LED Light with driver , Pack of 1(5RM),suitable to put under cobe and give glare free lights complete all as specified and directed . Make: Philips/Jaquar
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm Make:Bajaj/Havells/Philips
Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified and directed.
S&F submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type in PVC conduit for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 10 sqmm copper conductor cable, one run of 6 sqmm copper cable and one run of PVC conduit shall be measured as one unit length
All as per item No 46 here-in-before but size of cable 2 x6 sqmm complete along with cable 1x 4 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 6.0 sqmm copper conductor cable, one run of 4 sqmm copper cable and one run of PVC conduit shall be measured as one unit length
All as per item No 46 here-in-before but size of cable 2 x 4 sqmm complete along with cable 1x2.5 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 4 sqmm copper conductor cable, one run of 2.5 sqmm copper cable and one run of PVC conduit shall be measured as one unit length
Supply and fix in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.
Supply and Fix in replacement factory made 8 way load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as outgoing complete all as specified and directed. Note : Rate of MCCB TPN 125 Amp included in the quoted rate
Supply and fix in replacement MCB SP 5-32 Amp, 10kA ,c curve complete all as specified and directed.
Supply and fix in replacement MCB SPN 40-63 Amp, 10kA ,c curve complete all as specified and directed.
Supply and fix in replacement MCB SP 40-63 Amp, 10kA,c curve complete all as specified and directed.
Supply & FIX in replacement Modular AC box complete with MCB 20-32 Amp, 230 volts AC complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor S & F ceiling fan 1200 mm with 5 ft tie rod ,canopy, u clamp, white colour copper wounded motor ,white colour complete all as specified and directed Make :Bajaj/Havells/Usha (BLDC)
s&f wall fan 400mm (16 inch) 60 watt Oscillating wall fan (KD white) wall mounted speed 1350 Pram complete all as specified and directed Make :Bajaj/Crompton/Havells
Supply, installation, testing and commissioning of Inverter type Hot and Cold Split Air-conditioner Hi wall Model of cooling capacity 1.5 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Indoor sound level less than 48 DB, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with 4 – star BEE rating & ISEER not less then 4.39 suitable for working on single phase 230V,50Hz power supply etc. complete in all respect Make:-O- General or equivalent to Daikin/Hitachi Note : copper refrigerant pipe,3 core wire, stand for out door and indoor, making of holes into wall to connect indoor and outdoor and other connected accessories included in the quoted rate ,
Hot and cold Cassette type AC 4 ton ,having air flow rate 33 m3/min ,Power consumption 4.39 KW ,indoor unit dimension 300x820x820 mm, machine weight 31 kg, outdoor unit dimensions 852x1030x400 .The indoor units shall be suitable to work on cooling as well as heating mode (including one year comprehensive maintenance and compressor warranty 3 years ) Make : Toshiba, or O-General or equivalent in Daikin,Hitachi Note : Quoted rates include copper refrigerant pipe upto 3 Mtr ,stand for outdoor fixing in PCC if required .
S & F voltage stabilizer 2-5 KVA copper wounded complete all as specified
M&L for laying of XLPE PVC sheathed armoured cable 35 sqmm 4 core complete all as specified and directed. Fixing of cable to the wall or on surface with saddle and u shaped clips,
S & F conduit pipe 20mm for LAN/TV/telephone/internet wires concealed into wall or above the fall ceiling for each computer table as per the site requirement complete all as specified and directed
S& F modular type socket for LAN connection/telephone connection /USB connection complete all as specified and directed NOTE : Make and module of socket must be same as that of switch boards
supply and fix Raceway cable tray made of GI (dimensions width 300mm to 600mm and depth 150mm to 300mm ) suitable to put under flooring for laying LAN/TV cable and other electric wires complete all as specified and directed
M&L for making way to fix Raceway cable tray under flooring by cutting the floor tiles/PCC using suitable tools and maintain the surface as per existing complete all as specified and directed (if the plaster or PCC work required to maintain the surface will be done by contractor as per site requirement )
B Kumar and Co
Shivam Firetech Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .