8221 SPECIAL REPAIRS TO EM INSTALLATION MES PUMP HOUSE BLDGS (P-74 P-107 P-109 AND P-217) AT AFMC PUNE

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level and removing rubbish off the premises complete all as directed.

Demolition Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the premises complete all as directed.

Demolition of cement concrete ( reinforced ) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed .

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as directed.

Demolition of precast block walling built in cement mortar and removing from site complete all as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as directed.

Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) and making good disturbed portion and removing unserviceable materials off the premises complete all as directed.

All as per item No 8 here-in-before but exc 1.5 sqm and n exc 4.0 sqm each

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and removing from site complete all as directed.

Taking down roof trusses, coupled rafters or trussed beams above 4m and upto 8m span and removing from site complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removing from site complete all as directed.

Taking up or down carefully 15 mm bore steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

All as per item No 13 here-in-before but 20 mm bore.

Taking down rain water/soil/waste/vent pipes including all fittings any size and pattern and removing from site complete all as directed.

Demolition and breaking up of drain pipe of 150 mm to 300 mm dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar, and removing from site complete all as directed.

Excavation in trenches, n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation or for shafts,wells, cesspits, manholes,pier holes etc, n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out in soft/loose soil, complete all as specified and as directed.

All as per item No 17 here-in-before but exc 1.5 m deep and n exc 3.0 m deep.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm, complete all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, complete all as specified and as directed .

M&L for sand filling under floors or in foundations complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6. complete all as specified and directed.

M&L for precast cement concrete solid building blocks 10 cm thick as in kerbs (with plain or interlocking joints as directed)set in cement mortar 1:4 complete all as specified and directed

M&L for precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs ( for manholes etc). and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge. .

S & F 35 mm thick Second class hard wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board medium density complete all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading, and joints together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as direceted.

S&F 100 mm long butt hinges, extruded aluminium anodised alloy with galvanised mild steel hinge pin, type B-21complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm long aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M & L rolled mild steel in roof trusses (framed), trussed, purlins, rails, fastenings and heavy bracket framing including distance pieces, cleats etc grade (Fe-410-W E-250, quality B) complete all as specified and directed.

S & F mild steel framed work as in gates with ornamental and intricate design with ends of bars shouldered and/or riveted con- forming to Fe.290.Gde-E-165 including pintle hinges, stops, hand made sliding bolts etc complete all as specified and directed.

S & F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F mild steel TMT bars 8 mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending and binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.

S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and directed.

S& F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repairs 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete but gear operated type with chain wheel and hand chain .

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for 75 mm thick plain Cement concrete 1:3:6 type C2, (40 mm graded aggregate) ,finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth with using extra cement complete all as specified and directed.

M&L for repairs to ends of chajjas/ Parapets by removing old concrete, loose material ,& cleaning of the reinforcement and applying epoxy (Nitto bond ) to facilitate proper bonding with old surfaces finishing the surface fair & even in cement concrete 1:1.5 :3 ( 12.5 mm graded stone aggregate) including necessary formwork and making good with existing finishes including necessary scaffolding complete all as directed by Engr-in charge.

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L Non skid ceramic coloured tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured glazed Ceramics tiles 300 x 450 x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified and directed.

M&L for 60 mm thick machine pressed precast concerete factory made interlocking paver block of any shape and size fixed with grey cement and pigment, conforming to IS 15658-2006, M-35 grade complete all as specified and directed.

M & L 10 mm thick Rendering on fair faces of brick work or concrete surfaces(internal wall) in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.

M & L 15 mm thick Rendering on fair faces of brick work or concrete surfaces (external wall) in cement mortar 1:4 in two layers of 5 mm thick top layer over 10 mm thick rendering and top layer shall be mixed with water proofing compound @ 3 % by wt of cement or as per manufacture's instruction, surface finished even and smooth without using extra cement all as spd and directed.

Supply only water proofing compound

Cutting chases for consealed water tubing and making good, cutting not exc 10 cm girth in brick wall, stone, concrete block or slab walls etc complete and pointing in cement mortar (1:3) all as specified and directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M & L for three coats of white on newly plasered surface of wall including preparation of surface complete all as specified and directed.

M & L for two coats of cement based paint over a coat of cement primer including preparation of surface on walls complete all as specified and directed.

M&L for preparing old surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of new or presiously untreated steel surfaces of any description not otherwise described n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

"M & L for water proofing treatment to RCC roof slab, walls, chhajjas etc as specified below and as directed by Engineer-in-Charge including taking down old waterproofing tratement. (a) M&L for 10mm thick screed bed in CM 1:3 mixed with and including liquid water proofing compound as per manufacturer's instruction on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc & applying a coat of approved bitumnous primer @ 0.70kg/Sqm of area complete all as specified. (c) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.6 kg/Sqm and 3 mm thick with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specifed & as directed."

S & F 1000 litres capacity Rotational moulded polythylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plasitc ball complete including taking down old u/s tank complete all as specified and directed.

All as per item No 64 here-in-before but 500 litres capacity tank.

S&F 15 mm bore GI tubing "medium grade" galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specifed and directed.

All as per item No 66 here-in-before but 20 mm bore.

Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.

Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

All as per item No 73 here-in-before but 75mm bore.

S & F 110mm bore PVC (SWR)Vent cowl complete all as specified and directed.

M & L for Reinforced concrete pipes, 150mm bore class NP2, laid & jointed with collars complete all as specified and as directed .

All as per item No76 here in before, but 200 mm bore pipe.

M & L for Concrete bed to drain pipes of bore 150 mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports, complete all as specified and as directed.

All as per item No78 here in before, but 200 mm bore pipe.

S&F in repairs 15 mm bore stop valve cast copper alloy chromium plated fancy type with long shank and cup consealed type secrewed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated 2 way bib cock with wall flange confirming to CAT No. F2002161 of " Cera" or of equivalent model of specified make in PS complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal', white , including fixing bolts etc including PVC seat cover white with flat bottom including CP or aluminium anodised hinges devices etc complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white/ ivory, with inlet, ball valve, float and handle of 10 ltrs capacity make ISI incl all internal fitting and including PVC flush pipe etc complete all as specified & directed by Engr-in-Incharge

S&F in repairs vitrious china wash hand basin white 550x400 mm, flat back fixed with fasteners/cast iron brackets complete all as specified and directed.

S&F in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including push cock, waste pipe and flush pipe complete all as specified and directed.

S & F health faucet ABS body with wall hook and 1 mtr CP PVC hose pipe confirming to CAT No. F8030103 of " Cera" or of equivalent model of specified make in PS complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 600 mm long complete all as specified and directed.

S & F in repairs steel grating of 100mm in size for nahni trap/floor including jointing complete all as specified and directed.

M & L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

M&L for granite 16 to 18 mm thick of any type table rubbed and polished for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment complete all as specified and directed.

shiva traders

TRINITY ENGINEERS

REKHA ELECTRICALS

Raj Construction Company

TULSAYA CONSTRUCTION

Suma Construction

SARATH ENTERPRISES

KSP ENTERPRISES

Mourya Construction

ELIEYAS TRADERS