GE(S)/M-27/2021-22

Amount

Surface dressing n. exc. 15 cm deep and getting out in any type of soil complete all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Description all as per srl item No 3 above, but exc 1.5 m and n. exc. 3.00m in depth complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soil) exc. 250m but n.exc. 500m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete, bed of manholes etc. complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping including necessary weathering and form work etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, haunching, benching, kerbs , mud stops, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in base/anchorage for fixing to trusses and the like, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in surface channels, drain, benching and PCC bend top of manhole brick work etc with sligthly chamfered or rounded angles including necessary formwork, and finished the exposed surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in concrete bed of drain pipes including haunching against the sides of pipes with concrete after they are laid and tested for 100mm bore complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in concrete bed of drain pipes including haunching against the sides of pipes with concrete after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in concrete bed of drain pipes including haunching against the sides of pipes with concrete after they are laid and tested for 200mm bore complete all as specified and directed.

M&L for cement concrete as in bed to drain pipes including forming cradles after they are laid and tested in cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregares) for 150mm bore pipe, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels, shelves complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in chajjas complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in lintel, shelves etc, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like including demolition of existing RCC complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan any radius in half brick wall with old size bricks built in CM (1:4) complete all as specified and directed.

M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exc 6 metre mean radius, built in CM 1:6, complete all as specified and directed.

M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exc 6 metre mean radius, built in CM 1:4, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for form work to sides of flat, rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical to batter complete all as specified and directed.

M&L for form work to sides and soffits of flat, rough finished surfaces of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for form work to flat, rough finished surfaces of concrete of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for form work to sides of square, rectangular or polygonal, rough finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for form work to soffits of flat, rough finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick(Horizontal or sloping) complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10 cm but n. exc. 20 cm wide, rough finished surfaces of concrete complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick factory made wire guazed and skeleton shutters (1st class softwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm Wenga/Teak colour PVC sheet reinforced with MS Square tube, fixed in opening as per drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as per specifications & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, cold rolled mild steel, (ISI) marked complete all as specified and directed.

S&F 100mm long butt hinges, type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long, aluminium anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F 200mm long, aluminium anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.

S&F "as in repair" 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.

S&F "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples or rubber/all beads, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F pressed steel frame of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including filling of PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) in frames/hold fast blocks, complete all as specified and directed.

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges 100mm long (2 Nos) and suitable handles as required, complete all as specified and directed.

S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded ) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

S&F tubular purlin fixed independently made out of MS medium grade tube (ERW or induction butt welded ) upto 40mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, jointing plates etc and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

S&F steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n. exc. 30cm long, 16mm dia of shank, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con forming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel round bars as in handle and runners, clamps and similar small articles complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in ridge/valley , gutter or straight flashings etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for 10mm thick rendering on concrete surface on top of roof slab in cement mortar 1:3, finished surface rough, including and mixing of liquid water proofing compound @ 3% by weight of cement complete all as specified and directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab/chajjas/canopy/parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Rendering 20mm thick in CM 1:3 mixed with liquid water proofing compound on RCC roof slab whilst the surface is still green, finished the surface even and smooth without using extra cement. (c) Applying oil bound bitumen primer @ 0.30 Litre/Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG/Litre at 25 degree centigrade on prepared surface. (d) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (e) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG/Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4,type B-0.

M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in floors, including finish the top surface of concrete even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection. Concrete shall be laid in alternate bays n.exc 3 m in length finished fair and even including provision of joints of 6 mm wide and 10 mm deep along the wall and bays filled with bitumen mastic (1:3) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishescomplete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 18-20mm thick black granite (of any type) work machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry including pointed with white cement with admixture of pigment to match with shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick rendering in two layers (base layer 10mm thick in CM 1:6 and finishing layer 5mm thick in CM 1:4) mixing and including liquid water proofing compound @ 0.200 ltr per 50 kg bag of cement, on brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 12mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces of walls and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling / top and sides of chajjas/facia of roof projection including necessary formwork, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil bound distemper, white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth and applying two coats of oil emulsion distemper, over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth by applying two coats of cement base paint including curing before and after, including a coat of alkali-resistant priming paint white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall and applying two coats of cement base paint including curing before and after, including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall and applying two coats of apex paint, including a coat of alkali-resistant priming paint complete all as specified and directed.

S&F 3.0mm thick figured (frosted) sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 3.0mm thick plain sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer, complete all as specified and directed.

M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.

M&L for disconnecting existing rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), setting aside ( or lower if required) for repair, cleaning, etc, and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in replacement Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position, including 20mm dia PVC ball valve, high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe fixed in position complete all as specified in SSR Part-1 and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting holes into or through brick walls built in CM 1:3 or cement concrete 1:2:4 type B-1 as required depth n. exc. 30cm and n. exc. 150 Sqcm in area complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F 15mm bore bib tap, with flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy (ISI marked), screwed down, high pressure with crutch or butterfly handle, screwed both ends for pipe or for unions complete all as specified and directed.

S&F 15mm bore angle valve, cast copper alloy (ISI marked), screwed down, high pressure with crutch or butterfly handle, screwed both ends for pipe or for unions complete all as specified and directed.

S&F "as in repair" 15mm bore angle valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 20mm bore gate valves, PP-R gate valves (brass inserted), as per requirement of site complete all as specified and directed.

S&F "as in repair" 20mm bore gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F "as in repair" PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F "as in repair" syphonic action kit PVC flushing cistern, 10 litres capacity complete all as specified and directed.

S&F PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.

S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.

S&F LDPE waste pipe, 32mm dia suitable for WHB / Sink including threaded PVC socket suitable for shank of waste coupling, complete all as specified and directed.

S&F "as in repair" LDPE waste pipe, 32mm dia suitable for WHB / Sink including threaded PVC socket suitable for shank of waste coupling, complete all as specified and directed.

S&F PVC connection 15mm size of length 450mm with PTMT nuts, complete all as specified and directed.

S&F "as in repair" PVC connection 15mm size of length 450mm with PTMT nuts, complete all as specified and directed.

S&F "as in repair" 100mm dia PVC sink coupling of PTMT having min. water seal of 25mm (minimum weight 180 gm) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.

S&F stainless steel gratings 75mm dia, fixed with cement mortar, complete all as specified and directed.

S&F stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed.

S&F "as in repair" stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed.

S&F stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.

S&F "as in repair" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.

S&F Vitreous China urinals, half stall type white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including spreader, CP coupling, waste pipe complete all as specified and directed.

S&F Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F vitreous china wash hand basin counter type, white oval shape of size 630mm x 450mm including CP pillar tap but including CP brass waste coupling and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe of 32mm dia, complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, double socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, double socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) Nahni trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F 125/110mm bore PVC (SWR) gully trap setting and jointing in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M&L 100mm dia cast iron (sand cast) soil, waste vent pipes in any length with or without ears fixed with cement joints and tested including demolition and breaking up existing drain pipes set in cement mortar complete all as specified and directed.

M&L (sand cast) 100mm dia cast iron bends with ovel access door and jointed with neat cement paste complete all as specified and directed.

M&L (sand cast) 100mm dia cast cowl cap complete all as specified and directed.

M&L stack clamps made out of 50mm x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia cast iron pipe complete all as specified and directed.

M&L for reinforced cement concrete pipes with collers, class NP2, laid in trenches and jointed for 150mm bore complete all as specified and directed.

M&L for SGSW drain pipes 100mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 with spun yarn and tested including demolition and breaking up existing drain pipes set in cement mortar complete all as specified and directed.

M&L for SGSW drain pipes 150mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 with spun yarn and tested including demolition and breaking up existing drain pipes set in cement mortar complete all as specified and directed.

M&L for SGSW drain pipes 200mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 with spun yarn and tested including demolition and breaking up existing drain pipes set in cement mortar complete all as specified and directed.

M&L for Soakage well including excavation and earth work in any type of soil, foundation in PCC 1:4:8, walls of honey combed and solid in CM, RCC M-25 concrete, brick work in CM, RCC cover slab in M-25, RR masonary, filling with brick bats complete of size 1.20 m dia X 3.00 m deep all as specified and shown on drg TD Drg No CEPZ/C-TD/013/13 sheet 1/5 to 5/5.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. Note:- Reinforcement cut as required to facilitate demolition)

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.

Dismantling timber scantling 40 Sqm and over in section in unframed work etc complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams, above 4m but n. exc. 8m length clear span complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete and making good disturbed surfaces of walls, floors to match with existing specifications and keeping aside serviceable items for reuse within the same bldg and removing UNSV items from site, complete all as specified and directed.

M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

S&F Switch piano flush button, single pole, one way, 5 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F ceiling rose, surface bakelite, 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.

M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FR PVC insulated unsheathed fire retardent copper conductor cable 1100 volts grade in and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8mm including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FR PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed by Engineer-in-Charge.

Description all as per srl item No. 179.00 here-in-before but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way, complete all as specified and directed.

Description all as per srl item No. 179.00 here-in-before but for 5 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way, complete all as specified and directed.

Description all as per srl item No. 179.00 here-in-before but for 15 Amps socket outlets point using 2.5 Sqmm FR PVC insulated multistranded copper conductor cable including 2.5 Sqmm FR PVC insulated unsheathed multistranded copper conductor cable as earth wire complete all as specified and directed.

S&F modular socket outlet 6 Amp, 2/3 pin mutipurpose, 2 module complete all as specified and directed.

S&F modular socket outlet 5/15 Amp, 2/3 pin multi purpose, 2 module, complete all as specified and directed.

S&F modular switch 1 way 6 Amp, 1 module, complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings with polycarbonate body, complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F modular fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 120W, 2 module, hum free and connecting electrically, complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 6.0 Sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead, drawn in and including concealed non metallic rigid PVC conduit, medium grade and making good the disturbed surfaces to match with existing specifications, including taking down exisating sub main wiring complete all as specified and directed. Note :- Two run of cable with one run of earth wire and PVC conduit shall be measured and paid for as one unit.

S&F exhaust fan with louvers heavy duty of metal body and blades, 300mm sweep suitable to work on 230 Volt 50 Hz AC, 900RPM, including connecting to ceiling rose complete all as specified and directed.

S&F "as in replacement" 12 Watt LED lamp including testing, complete all as specified.

S&F 9 Watt LED lamp including testing, complete all as specified.

S&F bulk head 10 W LED light fitting IP 43 in engineering plastic housing with clear primatic diffuser complete with all accessories, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

S&F surface mounted 1x10 Watt LED tube light fittings (2 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F LED batten light fitting 10 Watt LED 6000K (2 feet long), with extruded aluminium heat shink, control gear, poly carbonate extruded diffuser & integrated electronic driver 230 volt etc complete with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F surface mounted 1x10 Watt LED tube light fittings (2 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F LED batten light fitting 20 Watt LED 6000K (4 feet long), with extruded aluminium heat shink, control gear, poly carbonate extruded diffuser & integrated electronic driver 230 volt etc complete with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F security light luminaire 20 Watt LED, IP 65 AC 230 Volts, street light luminarie with finless design which offers upto 70% energy saving complete making connection with security street light box or OH line using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable and testing etc, complete all as specified and directed.

Note for srl item No 194.00 to 201.00 above 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 5 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

S&F electric water heater storage type, of capacity 25 ltr, BEE 5 star rated complete all as specified and directed.

S&F ceiling fans with blade, down rods, electronic regulator and accessories 230volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) including making connections using 3 core 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning complete all as specified and directed.

S&F exhaust fans steel body with blade, frame, louvers and accessories 230volts, 450mm sweep, heavy dut,y five star rated including making connections using 3 core 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning complete all as specified and directed.

Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and blades and refixing and hanging ceiling fan back after repair including fixing of blades and including electric connectioin overhauling including minor repairs by replacement of capasitor, safety pin, cap, nuts & bolts etc and making connections using 3core 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.

M&L for servicing of ceiling fan of 1200/1400mm sweep of any type and make including taking down from site, cleaning, greasing, oiling of bush and bearings, replacement of set of split pins (02 Nos) and re-fixing / hanging at same position of the existing site after servicing, complete all as specified and directed by Engineer-in-Charge.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 10 Sqmm x 2 core complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

Description all as per srl item No 207 here-in-before, but cable of size 16 Sqmm x 2 core complete all as specified and directed.

Description all as per srl item No 207 here-in-before, but cable of size 35 Sqmm x 3.5 core complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable 8cm below and 15cm above the cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

M&L for 20 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall complete all as specified and directed.

M&L for 40mm bore galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings such as MS clamps of size 25mm x 4mm, nuts, bolts, washers etc, complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, double door, single pole & neutral 240 volts 04 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, double door, single pole & neutral 240 volts 08 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F MCB SP 6-32 Amps, repturing capacity 10 KA, 'C' curve, 240 volts, 50 Hz, complete all as specified and directed.

S&F MCB SPN 10-32 Amps, repturing capacity 10 KA, 'C' curve, 240 volts, 50 Hz, complete all as specified and directed.

S&F MCB TPN 40-100Amp, repturing capacity 10 KA, 'B' curve, 415 volts, 50 Hz, complete all as specified and directed.

M&L for earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as required at site and directed.

M&L for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 25x4mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate,40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetable soil to the remaining 10%,removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

RD Engineers

WALIA ENTERPRISES

Bidder Name

WALIA ENTERPRISES

RD Engineers

M/S NARESH KUMAR SHARMA