Peterwar-Kasmar Adjoining Villages Rural Piped Water Supply Scheme under D.W. and S. Division Tenughat for the Year 2022-23 on turnkey basis.

Amount

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of HDPE pipes

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Earth Work in excavation of foundation trenches as per design section in ordinary soft rock ( Vide classification of soil item-C ) and disposal of excavated materials so obtained ( 50N away from the edge of the trenches ) with initial lead of 150 M and initial lift of 1.5 m as per specification and direction of E/I in ordinary of soft rock (where blasting is not reqired ) Balance 10% of total Earth work of taken classification soil item -C.

Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-100 , PN- 10 (DWSD 112M 1028)inspection charges and all complete.PE-100, PN 10

90 mm HDPE pipe

125 mm HDPE pipe

160 mm HDPE pipe

Dismaitaling Plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of un- serviceable materials with all leads all complete as per direction of E/I.

Providing PCC M-150 in nominal mix of (1:2:4) in road with approved quality of stones chips 20 mm - 6mm size graded and clean coarse sand FM 2.5 to 3.0 including screening shuttering mixing cmenet concrete in mixer and placing in position vibrating

Earth work in back filling the trenches after laying different types and sies of pipes with earth removed during excavation within initial lead and lift as per specification and design of Engineer -in- charge (for classification of Soil item B & C )

Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complet with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS 7634 Part II

90 mm HDPE pipe

125 mm HDPE pipe

160 mm HDPE pipe

Supplying Labours Tools and Tackles for Testing of Lead CI or UPVC or HDPE or AC or DI pressure Pipe upto 60 m head of water all complete as per specification direction EI (Water to be supplied free of cost departmentally)

90 mm HDPE pipe

125 mm HDPE pipe

160 mm HDPE pipe

Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worm gear arrangements as per test pressure satainless steel , spindle , caps including all transportation etc. complete.(PN-1 without byepass arrangement.) with 10% CP

90 mm dia/100mm dia

125 mm dia

Supplying Labour and tools for fixing CI sluice valve trenches with a pair of C.I Tail pair including making ) flanged joints as per IS specification confirming to I.S.S 782-1978 confirming to I.S.S 6557-1972 and nuts and bolts confirming to I.S.S 1364 -1983 ).Including drilling holes in flanged if required as per specification and direction of E/I .Scour valve

90 mm dia/100mm dia

125 mm dia

Carriage of Material

Cement 10 KM lead

Sand 36 KM Lead

Stone Chips 11 KM lead

House connection - 4407 Nos

Earth Work in excavation (As per I.S. 3114/1965) for laying of Different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and life asper specification and direction of Engineer in-charge (b) For classification of soil item -B

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labours , royalty and taxes all complete as per building specification and direction of E/I.

Centering & Shuttering including strutting, propping etc. and removal of form for columuns pittars, pipers, abutments, posts & struts.

Providing P C C M-150 in nominal mix of (1:2:4)in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M2.5 to 3 including screening shuttering , mixing cement concrete in mixer and placing in position, vibratig, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Earth work in back filling the trenchage after laying different type and size of pipes with earth removed during excavation within initials leads and lift as per specification and direction of E/I

Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 with 1.5 mm thick cement punning over it including screening, curing, with all leads and lifts of water,taxes and royalty all complete as per building specification an direction of E/I.

Providing and supplying Blue MDPE pipes confirming to ISO 4427:1996 manufactured from virgin resin PE 80 food grade compounded raw materials having blue colour only assurance certificate from quality agencies like WRC/CIPET (India) / DVGM / KIWA/SPGN etc for usage in drinking water with quality system. The cost shall include testing of all materials all taxes central, state, Municipal, Inspection charges transportation up to site ,transit insurance, loading, unloading, stacking etc complete as specified and directed.PN16(SDR-9) with ED 20 mm

Providing and supplying G.I. pipes (Tata and euivalent make) for usage in drinking water with quality system. The cost shall include testing of all materials all taxes central, state, Municipal, Inspection charges transportation up to site ,transit insurance, loading, unloading, stacking etc complete as specified and directed. 15 MM

Lowering laying and jointing HDPE/MDPE pipes in proper position including all specials by compression fitting / electrofusion and But fusion jointing procedure including hydroulic testing as per relevent IS code complete with all materials for jointing procedures like Electrofusion machine , electric mirror/heater/ But fusion welding machine with hydroulic jack,top loading clamp etc pump and accessories for hyroulic tesing and all labours as directed by E/I.as per IS7634 part -2 - 20mm

Supplying labours and tools for fixing G.I.Pipes with red lead and yarn of following nominal bore with screwed and socketed joints on wall ,ceiling and floor including supplying and fittings of wall hooks or pipe clamps ,wooden plugs, cutting pipes to size and threading ends if required etc all complete as per specification and direction of E/I. 15 mm

Supplying and fixing of G.M. ferrule of approved make in existing C.I/D.I main including drilling and taping C.I./D.I main all complete as per specification and direction of E/I. (3mm dia ferrule weight not less than 425 Gm)

Providing and fixing of G.M. Fullway valve of approved quality all complete as per specification and direction of E/I. (20 dia and weight not less than 400 Gm)

Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. (15 dia and weight not less than 400 Gm)

Supplying and fixing G.I.fitting of approved make all complete as per specification and direction of E/I.

20 mm dia ELBOW

15 mm dia ELBOW

20mm dia Reducing socket

20mm dia Nipple

15mm dia Nipple

20mm dia Union Socket

15 mm dia Socket

20mm dia socket

Carriage of materials

Labour Cess @ 1%

ADITYA SINGH

BRAJDHARI KUMAR

LUKE ENGICON