SPL REPAIR TO GOLANDAZ OFFICERS MESS BLDG NO. P-1 (ENTRANCE AREA AND LOBBY) ZONE -08 AT TALBEHAT MIL STATION

Amount

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish complete all as specified and directed.

Material and Labour for Vitrified tiles dark or light shade /double charge /ultra charged 1200 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.Make : Johnson tiles / Kajaria / Orient Bell/AGL, Sample as approved By AGE (I).

Material and Labour for Vitrified tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell/AGL, Sample as approved By AGE (I).

Material and Labour for glazed ceramic exterior wall tiles 6 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed. Make – Johnson (Endura) or equivalent in Johnson tiles / Kajaria / Orient Bell/AGL/ Euro tiles, sample as approved by AGE (I).

Material and Labour for Granite stone best quality (of any type), 20 mm thick machine cut, skirting / dedo beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including dismentling of stone slab complete all as specified and directed

M&L for 12 mm thick toughened glass best quality and glazing with wpc glazing bar in square exc 1.2 sqm in each pane complete all as specified & directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.

M&L for POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM)respectively including aluminum angle 25x25 1n4 mm &provn of hangers of GI wire of 2mm dia and providing painting with two coast of synthetic enamel paint over a coat of primer on wooden surface complete all as specified and directed by Engineer-in-Charge.

Making POP Cornices 100 mm wide of required design as approved by GE

S&F for 25 mm thickness insulated PVC wall Lining consisting of insulated panels having expanded polystyrene (EPS) stuck to 2 mm thick single side prelam PVC sheet duly fitted into the wall as per specification and drawing complete.

Supply & Fixed in repair Aluminium composite panel sheet 3mm thick PVCF of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed.approved sample as kept in AGE(I) Office.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made 35 mm thick architects veneer designer ply lam both side flush door shutter solid core construction with block board core incl 5mm thick teakwood leaping alround complete all as specified & directed.approved sample as kept in AGE (I) Office.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for butt hinges cast brass with mild hingespin, bright polished and fixed type B-11 of size 100mm etc complete all as specified & directed.

S&F for 150 mm extruded brass handles, fabricated type polished complete all as specified & directed.

S&F for brass barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F for 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

M&L for preparing wooden new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparing old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

S & F for powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

M&L for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified & directed.

S&F Door closer,aluminium body (extruded section) hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land complete all as specified and directed. Note : Height of Bldg Up to fourth floor.

Material and labour for 15-25 mm thick ready mix plaster in multy layer with liquid water proofing compound (Dr Fixit LW+) on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s ACC Products / M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and labour for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s ACC Products / M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade complete all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

Material and Labour for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed.

M&L preparing old painted wooden surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Supply & Fixed in repair 12 mm thickness fluted wpc indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed.approved sample as kept in AGE Office.

Taking down carefully copper/Aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc complete all as directed.

Taking down carefully complete light fittings removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc complete all as directed.

Taking down Distribution Boards along with MCB's incl removing the same from site and making good to the disturbed surface complete. Note: All taken down MCBs should be deposited to MES store by the contractor without any extra charge.

Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete.

M/L for point wiring concealed type with 1.5 sq mm FRLS PVC insulated single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia alongwith chase/ chisel cutting, PVC conduit and making good to the disturbed surface and match the existing colour all as specified and directed : Wire: Make -Mescab/Polycab/KEI/Havells/Finolex PVC conduit: Make -Polycab/Precision/Plaza/Kalinga Note:- (i) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing capping and its accessories. (ii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

All as per item NO 5 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core FRLS PVC insulated cable multistranded copper conductor of size 4 sq mm for phase & neutral & 4 sq mm for earth continuity conductor.

S&F modular switch single pole one way 6/10 Amp 240 volt. MAKE:- Havells(Oro)/Anchor(Roma classic)/Philips

S&F modular switch single pole one way 16/20 Amp 240 volt. MAKE:- Havells(Oro)/Anchor(Penta)/Gold Medal

S&F for modular socket 5 Pin 6/10 Amp with shuttered, suitable for 2 module 240 volt. MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular socket 5 Pin 6/16 Amp flush type, with shuttered, suitable for 2 module. Make: Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 2 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 3 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 6 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F modular type fan regulator electronic step type, suitable for 2 modules 100 watt, 240 volt. MAKE:-Havells(Reo)/Anchor(Roma classic)/Philips

M&L for sub main concealed wiring with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit FRLS accessories of ISI marks medium grade including 6.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly. Wire: Make -Mescab/Polycab/KEI/Havells/Finolex PVC conduit: Make -Polycab/Precision/Plaza Note:- (i)One run of conduit two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit. (ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories. (iii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated.

S&F in replacement single pole and neutral enclosure with a two pin and earth socket complete with one single pole MCB of 20 to 32 Amp 240 volt. Make:- Legrand/Hager/Schneider/IndoAsian/Siemens.

S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps 240 volts double door (Metallic) type. Make:- Legrand/Hager/Schneider/IndoAsian/Siemens.

S&F MCB SP 6 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

S&F MCB SPN 40 to 63 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

S&F MCCB 4 pole 63 Amp, 440 volt 'C' series, 16 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

Supply and fixing 18 W white light round surface mounted LED down light for ceiling complete all as specified and as directed by Engineer-in-Charge. Make Havells/Surya/Crompton/Philips

M&L for PVC casing capping of size 100 x 50 mm complete

M&L for Maharaja Style Indian Crystal Chandelier Jhoomar (Size- 1200mm, Golden) complete all as specified and as directed by Engineer-in-Charge.

M&L for Air Curtain 6 Feet Portable Room Air Purifier (White) complete all as specified and as directed by Engineer-in-Charge.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/s Indu Enterprises (BID ID -3110073)

PRATAP CONSTRUCTION (BID ID -3112862)

M/S Kharya Associates (BID ID -3113971)