SPECIAL REPAIRS TO MEDICAL DIVISION BLDG NO P-115 AT CHAFB UNDER GE (AF) BANGALORE

Amount

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including the like laid over cement mortar 1:4, 20 mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match including grinding and polishing complete

M&L for rounding to edges of granite/stone slab such as in steps, cooking platform and other similar situations etc complete all as specified and as directed by Engr-In-Charge.

S & F non Skid (rough) endura High thickness tiles of 10/12 mm thick of approved size and shape and colour with minimum flexural strength of 38 N/mm2 over 20 mm thick screed bed CM 1:6 and including dismantling floor, hearth or wall tiling incl cement mortar screed bed rubbish off the premisies complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for 75 mm thick PCC 1:4:8 type B2 using 40mm graded aggregate as in floors/hard standing

Demolition of cement concrete in floors and pavings not exc 15cm thick below or above ground level.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete reinforced of any description and in any position / any height not otherwise specifically provided for all as specified and as directed by Engr-in-Charge.

Demolition of honey comb wall of any thickness complete all as specified and as directed

M & L PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof/chajja padding smooth finish for maintaining roof/chajja slope complete all as specified and as directed

M&L for providing cement concrete type B-0 (1:2:4) using 12.5 mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form of work all as specified and directed.

Taking down old damaged existing water proofing membrane of any thickness from roof top including taking down cement or lime plaster anu description over roof slab complete all as specified and directed. Note: All waste materials shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M& L for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bituminous primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.1 Kg per sqm over RCC roof slab/rejection/parapet after cleaning the surface by removing dust dirt etc as manufactures instructions including M & L for rendering 10mm thick cement plaster in cm 1:4 with and including water proofing compound @ 3% by weight of cement or as per manufacture's instruction on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls, RCC slab ,ceiling etc including raking out joints, hacking for key, scrubbing down with water, etc. all as specified including necessary scaffolding.

M & L for rendering 15 mm thick cement plaster 1:4 with and including water proofing compound @ 3% by weight of cement or as per manufacture's instruction on concrete surfaces , finished even and smooth without using extra cement all as directed.all as specified and as directed. (Note : WPC will be measured and paid seperately as supply only under relevant item).

Supply only integral water proofing compound complete all as directed.

M & L for rendering 15 mm thick on fair faces of brick works/ block works or concrete surfaces cement plaster 1:6 finished even and smooth without using extra cement all as directed.all as specified and as directed.

M&L for preparing new plastered on wall and applying three coats of white wash.

M&L for preparing new plastered on wall and applying two coats of oil bound distemper over a coat ofchalk whiteneing complete all as specified and directed by Engr-In-Charge.

Rendering 10mm thick cement plaster in cement mortar 1:3,on concrete sufaces as in ceiling/ chajja , finished even and smooth without using extra cement.

M&L for preparing new plastered on ceiling and applying three coats of white wash.

M&L for preparing new plastered surface on ceiling and applying two coats of distemper over a coat of chalk whiteneing complete all as specified and directed by Engr-In-Charge.

M & L for rendering 20 mm thick cement plaster 1:4 with and including water proofing compound @ 3% by weight of cement or as per manufacture's instruction on stone masonry surface finished even and smooth without using extra cement all as directed all as specified and as directed. (Note : WPC will be measured and paid seperately as supply only under relevant item).

Preparation of new plastered surfaces of wall and apply two coat of Weather proof exterior emulsion over a coat of primer all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat distemper oil emulsion, white or tinted including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L complete removal of existing treatment on walls and applying 1mm thick wall care putty(birla putty) and preparation of surface making smooth and applying primer for base coat and applying two caot of oil bound distemper complete all as specified and as directed. (Note : Rate including necessary scaffolding for the entire work)

M&L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding upto 1st floor story complete all as specified and as directed.

M & L preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of oil bound distemper on old distempered ceilings, cornices etc. including necessary scaffolding upto 1st floor story all as specified and as directed.

M&L preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding upto1st floor story complete all as specified and as directed.

M&L complete removal of existing treatment on walls and preparation of surface making smooth and apply two coat of Weather proof exterior emulsion over a coat of primer complete all as specified and as directed. (Note : Rate including necessary scaffolding up to 1 st floor)

Disconnecting existing tanks, setting aside or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in old or new location position . After cleaning repairing and removing all scale dirt and wiping ,drying etc complete capacity exc 500 & n exc 1000 ltr complete all as specified.

S&F triple layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , 1000 Ltrs Capacity including dismantling existing 1000 Ltr water tanks complete all as specified and as directed.

S&F ball valves, 20mm dia bore high pressure,of PTMT with epoxy coated Aluminium rod& high density plastic ball screwed for iron pipe and fixed.

S & F in repair ball valves, 20mm dia bore high pressure,of PTMT with epoxy coated Aluminium rod& high density plastic ball screwed for iron pipe and fixed.

Demolition of Brick work /PCC block masonry or stone masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing dressed stone works and pre-cast concrete articles complete all as directed.

M&L brick work with sub class ‘B’ brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:6 complete all as specified and as directed.

Pre-cast cement concrete block in PCC 1:3:6 type C1(20mm graded aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete all as specified and as directed

S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Taking down steel window/ventilator (without taking off shutter from the frame) of any size, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed by Engr-In-Charge.

M&L for Powder coated aluminium sliding windows of three tracks outer frame top,side sections,bottom frame (track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wre mesh (total 3 Nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40x18x1.5 mm including glass 5mm thick and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm etc complete all as specified and directed by Engr- In-Charge.

S&F in repair 20 mm dia curtain rods fancy type of aluminium annodised powder coated with fixing brackets (both sides), stops, rollers etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair curtain rod brackets aluminium annodised powder coated fixed complete all as specified and directed by Engr- In-Charge.

Dismantling existing alumiinuim doors/ sliding doors/aluminium partition etc complete

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 4 sqm but n exc 7 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

Supply and fixing of aluminium frame work powder coating of any colour (thickness of powder coating not less than 50 micron) as in doors /windows/partitions,cleats,fixing/sliding typeof rulars and other necessary aluminium sections using standard aluminium anodised (15 micron) extruded section including provision of glazing clips (double glazing) hinges ,handle etc excluding Sheet glass of 5.5 mm thick and 12mm thick prelaminated Particle board etc including taking down of existing partitions, complete all as specified and as directed by Engineer-in-Charge. Note: Glass and prelaminated board will be measured and paid separately under respective item.

S&F powder coated aluminium (minimum thickness powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges / pivot and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standar tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size , including necessaryfilling upm the gaps at junctions ie at top, bottom and sides wih required EPDM rubber/ neoprene gasketet . Aluminium sections shll be smooth,rust free, straight,mitred and jointed mechanicall wherever required including cleat angle, aluminium snap beading for glazing / panelig, C.P bass/ stainless stell screws all complete as per architectural drawings and the directions of Engr-In-Charge.

M&L for aluminium sliding door shutters ,aluminium section weighing not less than 0.55 Kg/RM including necessary joining cleats, glazing clips,rubber neoprene packing,handles 2 Nos in each door, complete locking arrangements with key anodised aluminium snap beading screws etc complete all as specified and directed by Engr-In-Charge.

Supply and fixing 12 mm prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations complete all as speciified and directed by Engr-In Charge

S & F Powder coated Aluminium Frame work for grills Deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc.,complete all as specified and as directed by Engr-In-Charge.

S & F framed work such as grills, grating, etc.. With ends of bars shouldered and/or rivted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-formig to Fe.290. Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth 0.56 mm nominal dia of wiore and average width of aperturee 1.18 mm and fixed with eads or stainless steel wwie staples complete all as specified and as directed by Engr-In-Charge.

S&Fin repair stainless steel wire cloth 0.56 mm nominal dia of wiore and average width of aperturee 1.18 mm and fixed with eads or stainless steel wwie staples complete all as specified and as directed by Engr-In-Charge.

Dismantling any type wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards /slabs/bankets any thickness including cover fillets complete all as specified and as directed by Engr-In-Charge.

S&F Armstrong 9mm PVC laminated gypsum board false ceiling of 600x 600 mm withprelude 24x3x300 mm main tee and 24x27x1200 mm cross tee and 24x25x600 cross tee and wall angle of 19x19x300 mm in false ceiling complete all as specified and as directed by Engr-In-Charge.

Supply and fixing of LD Square make clip in tile made up of 0.5/0.6 mm thick galvanized iron sheet of 120 GSM. The standard size of tile is of 550X550mm which is pressed to clip channel with dimpling on clips on tiles the tile would be powder coated for approved colour The powder coated thickness would be 70-80 micron for indoor applications the hanging system consist of clips channel, thread rod U mounting clamp, anchor fastner for ture ceiling mounting The entire unit rate includes the accessories like L/W wall angle made up of 0.40 mm Gl sheet of 120 GSm The clip channel would made of 0.4 mm GI Sheet which would be hung to the ture ceiling by using M6 threaded rod and "M6 hilti make anchors fastners with help of M6 washers and nuts complete all as specified and as directed by Engr- In-Charge. NOTE (The rate inclusive of scaffolding and necessary arrangements): Make - Armstrong /Grid Square /Equivalent

S& F in reapir double action floor sprig hydraulically regulated made up of minimum 1.25 mm thick alluminium alloy sheet foundation box,main body with stainless steel cover ,governing pivot made of brass, other parts made of mild steel heavy duty.

Dismantling floor hearth or wall tiling including cement morter bedding and backing coat plastering of any thckness removing serviceable tiles to store and rubbish off premises etc complete all as specified and as directed.

M&L Vitrified Ceramic tiles of size not exeeding 0.36 sqm of size and 10mm thick light shade in floors set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15 mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

All as per item No 60 above, but on vertical surfaces such as skirting, risers etc. with and including 10mm thick backing coat of CM 1:4 all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm th rendering 1:4 for laying wall finishes complete all as specified and as directed.

M&L for PCC 1:5:10 Type E-2 (using 40mm graded aggregate) as in filling in sunken slab complete.

M&L for providing water proofing treatment to sunken floor complete all as per following specification:- Providing 20mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement. Note : WPC shall measured and paid saperately

Application of two coats of pidifin 2k water proof coating i.e proof coat of Pidilite @ approx 1.00 Kg per sqm as per manufactures instructions. Note :- (i) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test complete all as specified and directed by Engineer-in-Charge . (ii) PCC filling shall be measured and paid separately. (iii) Water testing of sunken floor shall be carried as per direction of GE & rates quoted by the tenderer shall be deemed inclusive of expdr incurred on testing.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs urinal Spreader incl fixing with 15mm dia pipe all specified and directed.

Urinal partitions, 8 to 10 mm thick curved shaped urinal partition with frosted glass chrome finish of size of 900mm x 450mm complete all as specified and directed. (Make: Jaquar Cat No.JSE-CHR-110UC450 OR equivalent)

S&Fin repair stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe , cast iron cantilever bracket , connecting union overall size 915mmX460mm with bowl size 410mm X 330mmX160mm complete all as specified and directed by Engineer-in-Charge .

S&F in repairs vitreous China wash basin, white flat back, size 550x400mm including cutting for and pinning in ends of brackets or ereesing stand.

Supply only 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed (Fixing include in item No 36). Cera - F2002101 or equivalent

S&F in repairs vitreous china squatting pan Orrisa pattern of size 580 X 440mm white with integral foot rest 'P' trap including connection to trap and flush pipe anti-syphonage pipe etc complete including making good to floor.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete.

Supply only plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device (Fixing include inwash down water closet pan).

Supply only PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete (Fixing include in item for squatting pan and water closet pan).

S&F in repair PVC connection pipe 450mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed by Engr-In Charge..

S& F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. Cera - F8030104 or equivalent

S&F in repair wall mounted hand rail (without hinge )600 x 100 mm and incl necessary fixing arrangement to wall complete all as specified and directed by Engr-In-charge.(Cera cat No B2210102 )

S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.(Make: Jaquar Cat No.FON-40041)

S&F in repair 125mm dia brass chromium plated shower rose including arm with or without swivel joints including fixing to steel pipe or union complete all as specified and directed by Engr-In Charge.

S&F in repair Brass Chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed by Engr-In Charge.

S&F in repairs vitreous china white, appx size 160x160x90 mm soap dish , fixed to plugs with chromium plated brass screws.

S&F in repair Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed by Engr-In Charge.

S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&Fin repair liquid soap dispenser of stainless steel fixed by CP brass screw in wall complete all as specified and directed by Engr-In Charge. (Make: Jaguar Code No. CAN-1137 N or equivalent )

Taking up or down steel tubing / CPVC pipes and connections, fittings etc including cleaning for refixing or removal to store for 15mm bore complete all as specified and as directed.

M&L for refixing old steel tubing/ ld CPVC pipes 15 mm dia and connections in new or old position (Walls, ceilng ,floors etc) ( Ground floor to First Floor).

S&F tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

Taking up or down steel tubing / CPVC pipes and connections, fittings etc including cleaning for refixing or removal to store for 20 mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to First Floor).

M&L for refixing old steel tubing / old CPVC pipes 20 mm bore and connections in new or old position (Walls, ceilng ,floors etc) ( Ground floor to First Floor).

S&F tubing,medium grade,20mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

Taking up or down steel tubing / CPVC pipes and connections, fittings etc including cleaning for refixing or removal to store for 25 mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to First Floor).

M&L for refixing old steel tubing/ old CPVC pipes 25 mm bore and connections in new or old position (Walls, ceilng ,floors etc) ( Ground floor to First Floor).

S&F tubing,medium grade,25mm bore with all fittings fixed to walls and ceiling or laid in floors including cutting through walls and floors etc and their making good complete all as specified and directed.

Cutting chases pinning in making good for Stone concete block or slab walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting n exc 10cm girth complete all as specified and directed.

S&F in repairs 15 mm bore fancy type, chromium plated Stop valves / Angle cock screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions all as specifed and directed.

Dismantling of PVC drain pipes of 75/100/110mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floorcomplete all as specified and directed.

S&F PVC (SWR) bend with access door 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore complete all as specified and directed.

S&F PVC (SWR) double (double Y) branch piece, with access door 110 mm bore.equal or unequal complete all as specified and directed.

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 110mm bore complete all as specified and directed.

S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore complete all as specified and directed complete all as specified and directed.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S& F in repairs PVC(SWR) pipes 150mm bore , single socketed ,in any length with ruber ring joints, laid as a rain water pipe as vertical or horizontal complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F in repair PVC (SWR) floor trap 100 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-In Charge.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-In Charge.

S &F stainless steel tubes making shape ,cutting . Bending drilling to wall , floor & welding as in railing , gate etc with all fittings including dismantling existing steel tube / wooden complete

Hacking out old broken glass (any thickness ,size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of work all as directed by the Engineer-in-charge.

S&F for 4mm thick figured glass pin head type and glazing with oil putty in square not exc. 0.50 sqm in each pane complete all as specified and directed by the Engr-in-charge.

S&F 2 nd class hard wood glazed skeletn shutter 35 mm thick, open rebated and prepared to receive mesh ,edges of framing plain, chamfered or rounded complete all as specified and directed by Engr-in-Charge.

S&Fin repair floor door stopper of aluminiumalloy body Overall length of cover plate 140mm and tongue, anodised, with hard drawn steel spring, fixed in floor.

Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses all as specified and directed.

S&F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by the Engr-in-charge.

S&Fiin repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by the Engr-in-charge.

S&Fin repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by the Engr-in-charge.

S&Fin repair aluminium (extruded section body) door closer hydraulically regulated designation No 2 universal type ,suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg

M&L double action floor spring hydraulically regulated made up of miniumu 1.25mm thick aluminium alloy sheet foundation box,main body with stainlless steel cover,governing pivot made of bress ,other parts made of mild steel heavy duty and fixed in repirs.

Taking down shutters but exc 1 Sqm and n.exc2 Sqm including refixing in the same opening all as specified and directed by Eng-in-Charge

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed by Engr-In-Charge.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed by Eng-in-Charge

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame complete all as specified and directed by Engr-In-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

S &F Factorey made solid PVC Moulded door shutter,28 to 30mm thick(stiles),with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face ,with particle board core supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed by Engr-In-Charge.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed by Engr-In-Charge.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-In-Charge.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-In-Charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engr-In-Charge.

Removing demolished material ie building material concrete debris of any type etc to a distance of 30 KM or beyond out of premises of metropolition area including loading, unloading by manually or by mechanical means (JCB and to be transported through trolly or tipper and staking at the destination as and when directed by Engr-In-Charge during execution.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 4 sqm but n exc 9 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

Providing and installation of TOPLINE” Brand Glass Sliding Door operator Kit, Model No.TL-ASLD-T150 EASY, 4.2 Meters Track, Microwave Sensor 2 Nos., Program Remote control with one year warranty, which includes Door Safety Sensor, 96 Beams 2 meters Long.12mm Thickness Saint Gobain Clear Toughened Glass for Doors and Fixed Glass size; w-3000mm x h- 2500mm (clear opening is 1500mm w x 2100mm h) Aluminium U’ channel for Fixed Glass Partition, 12’L.

Taking down carefully copper/aluminium point wiring (light,fan, socket or power ) complete including its connected fitting/fixtures (ie holder, bulk head fittings, ceiling roses, fan regulators, switch , switch socket combination, FTL fitting, ceiling fans etc) and making good disturbed surfaces of wall roof etc complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated bakelite sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan/bell point controlled by one single pole 5 amps switch all as specified and as directed.

All as per item No : 146 above but one Ceiling fan point controlled by one single pole 5 Amps switch

All as per item No : 146 above but one Exhaust fan point controlled by one single pole 5 Amps switch

One switch socket out let point 5 Amps on same board with other switches.

All as per item No : 146 above but one switch socket out let point 5 Amps on independent board

All as per item No : 146 above but M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing/capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 2.50 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated bakelite sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed.

Supply and fixing inrepairs Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fix inrepairs socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed.

Supply and fixing inrepairs switch 15A flush type universal pattern 230 v all as specified and as directed.

Supply and fixing inrepairs socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed

Supply and fix inrepairs ceiling rose surface bakelite 65x25mm, two to three termimals complete all as specified and directed.

Supply and fixing inrepairs electronic fan regulator socketed step type upto 100 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm. all as specified and as directed

Supply and fixing inrepairs LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

Supply and fixing inrepairs LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing exhaust fan 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making hole on stone wall and holding frame etc all as directed.Make Havells Model Turbojet SP or equivalent in Bajaj/Orient.

Taking down ceiling/exhaust fan sealing cable end dismantling blades and removing for safe custody to store all as specified and directed

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed

M&L for ceiling fan rod size 600mm (24'') white colour for existing complete all as specified and directed.

Supply and fix Surge protection device Type 1+2 AC ,TP+N , I max 50kA(L-N) 70 kA(N-E) Havells Model DHSAANBC50320 or equivalent in Indo Asian/ Legrand/L&T complete all as specified and directed.

Supply and fix RCCB four pole 100mA 63Amps complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed. Including taking down old unsv from exiting place.

S&F Sheet metal enclosure for DB's double door TPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed. Including taking down old unsv from exiting place.

S&F MCB TPN, 63 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240/415 V, B- series with breaking capacity of 10KA complete all as specified and directed.

MCB SP, 6-40 Amps, 240V, B- series with breaking capacity of 10KA complete all as specified and directed.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements fixed on stone wall or floor or ceiling inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including non-metallic rigid PVC conduit and accessories and fixing arrangements fixed on stone wall or floor or ceiling including 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix sub main wiring with Four single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements fixed on stone wall or floor or ceiliing inc 10.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Two runs of earth continuity conductor,one run of PVC Conduit and Four runs of copper conductor together taken as one length for measuring unit length.

Supply & Fixing of Sheet metal enclosure for VTPN DB's double door TPN 04 ways Suitable for 125 Amps MCCB Fixed in DB, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified and directed. Including taking down old unsv from exiting place.

Supply and fixing of MCCB 125 A, TPN, 25 KA, Make : INDO ASIAN, HSN CODE : 8536 or equivalent in HAVELLS/ L&T.

M/S Suresh Raju

B5BUILDING SOLUTIONS

S.R.V.Builders

Sai Ram Builders

Moulya Builders

K. VENKATESH NAIDU

Ashraya Nirman