Loading…
Loading…
Tender Value
₹77.9 L
EMD Value
₹1.6 L
Closing Date
14 Sept 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
W3
17 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Balance Sheet and all other Financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference.
As Per Clause No. 10 of IR GCC-2022, For participating in tender,The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(A)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (B) Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (C) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any P.Way work.
10 conditions · 4 needing a document upload
Experience, financial status and ability: Tenderer is required to submit documents detailed here under for evaluation of his credentials.
Employment/Partnership etc. of Retired Railway Employees.:- The tenderer has to give required information regarding association of Retired Railway Employees either as Employee or Partnership etc. in the per-forma as enclosed Annexure-I to this chapter of this tender document as per clause No. 16(a) of IR GCC-2022.
List of works completed & in hand: Tenderer is required to submit, along with his tender, particulars of all works completed by him including works in hand for the Railways or for any other client in the Per-forma enclosed as Annexure-II to this chapter of this tender document. Figures of cost shall not include cost of materials supplied free of cost by the client to the contractor. The tender without this information may be treated as if the tenderer has no works in hand. Supportive documents from the organizations with which the tenderer is workings should be enclosed giving description of work, contract value, date of award, approximate date value of balance work.
List of court cases and arbitration cases: Tenderer is also required to submit, along with his tender, list of arbitration's demanded from any clients during the last five years preceding the date of opening of this tender as per Annexure-III/A to this chapter of this tender document. The tenderer is also required to submit, along with his tender, list of court cases filed against any clients during the last five years preceding the date of opening of this tender as per Annexure-III/B to this chapter of this tender document.
List of plant and machinery: Tenderer has to make his own arrangements for execution of works. The tenderer is required to submit, along with his tender, list of plant and machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work in Proforma given in Annexure-IV to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no plant and machinery available on hand (own) and that no plant and machinery are proposed to be inducted for the subject work.
List of personnel and organization: Tenderer is required to submit, along with his tender, list of Personnel and organization available on hand (own) and proposed to be engaged for the subject work in Proforma given in Annexure-V to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no personnel and organization and that no personnel and organization are proposed to be engaged for the subject work.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per clause no. 14 of GCC-2022, The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (A)HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (B)Partnership Firm: (i)A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (C)Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (D)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E)Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society.
Undertaking:- An undertaking regarding not blacklisted or debarred by Railway or any other Ministry/Department of the Govt. of India from participation in tender/contracts on date of opening of bids to be submitted by all partner/member in case of partnership firm/LLP as per clause 14 of GCC 2022. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per clause No. 15 of GCC-2022, The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.
Raxaul-Narkatiaganj - TTR(TWS+CMSC)-23 Sets (1:12).
TC-127-2026-SPJ~ECR
TC-127-2026-SPJ
Open
Works - General
12 Months
Samastipur, Bihar
₹0
₹1.6 L
21 Aug 2026
21 Aug 2026
31 Aug 2026
44 items across 1 schedule · ₹77,92,748.32 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For Casual/Scattered Rail Renewal work | RM | 1000.00 | 33.22 | 33,220 |
| 2 | Locations other than Ballasted Deck Bridge | Each | 200.00 | 421.38 | 84,276 |
| 3 | Ballasted Deck Bridge | Each | 200.00 | 497.89 | 99,578 |
| 4 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re- fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 66400.00 | 6.39 | 4,24,296 |
| 5 | For 1 in 12 Points & Crossing | Set | 23.00 | 8,821.32 | 2,02,890.36 |
| 6 | 1 in 12 Turnout | Set | 23.00 | 3,658.38 | 84,142.74 |
| 7 | For 1 in 12 Turnouts | Set | 23.00 | 27,030.76 | 6,21,707.48 |
| 8 | Depth of 300 mm below bottom of sleeper for Turnouts | TRM | 600.00 | 827.55 | 4,96,530 |
| 9 | Lifting and packing for regrading the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in-charge. | TRM | 1000.00 | 159.09 | 1,59,090 |
| 10 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 3000.00 | 23.36 | 70,080 |
| 11 | For 60 Kg/60EI-R260 grade Rail, Single shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. | Each | 322.00 | 1,613.06 | 5,19,405.32 |
| 12 | 1 in 12 PSC layout | Set | 23.00 | 13,267.04 | 3,05,141.92 |
| 13 | One Gang comprising of 20 physically fit labours plus 1 Mate.Note: In case, contractor provides less no. of Labour/Mate, payment will be deducted for each such labour @ 10% of the accepted item rate. | Gang Day | 90.00 | 13,697.07 | 12,32,736.3 |
| 14 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 92.00 | 1,576.35 | 1,45,024.2 |
| 15 | For 60 Kg Rails | TRM | 8000.00 | 100.43 | 8,03,440 |
| 16 | CSM / DUO / 3X with or without DGS (7.5 KVA generator and 8x500 W) | Night | 60.00 | 6,220.22 | 3,73,213.2 |
| 17 | 60 Kg - 110/90 UTS - Outside Track | Each | 300.00 | 311.53 | 93,459 |
| 18 | 60 Kg - 110/90 UTS - On Running Line | Each | 300.00 | 390.78 | 1,17,234 |
| 19 | Outside Track | Each | 600.00 | 52.01 | 31,206 |
| 20 | On Running Line | Each | 600.00 | 66.12 | 39,672 |
| 21 | In Wagon where mechanical handling is possible a n d traffic block is not required or in Truck/trailer. | MT | 300.00 | 116.98 | 35,094 |
| 22 | For lead up to 500 metre. | MT | 300.00 | 340.23 | 1,02,069 |
| 23 | Lead up to 5 Km | MT | 100.00 | 150.44 | 15,044 |
| 24 | Lead beyond 5 Km and up to 10 km | MT | 100.00 | 195.7 | 19,570 |
| 25 | Lead beyond 10 Km and up to 20 km | MT | 100.00 | 258.1 | 25,810 |
| 26 | Lead beyond 20 Km and up to 30 km | MT | 100.00 | 335.07 | 33,507 |
| 27 | Lead beyond 30 Km and up to 50 km | MT | 100.00 | 443.22 | 44,322 |
| 28 | Lead beyond 50 Km and up to 100 Km | MT | 100.00 | 681.36 | 68,136 |
| 29 | Lead beyond 100 Km and up to 150 Km | MT | 300.00 | 1,035.3 | 3,10,590 |
| 30 | Extra for every Km per MT beyond 150 Km over item no. 172047 | MT-Km | 45000.00 | 3.6 | 1,62,000 |
| 31 | Lead up to 5 Km | MT | 100.00 | 53.62 | 5,362 |
| 32 | Lead beyond 5 Km and up to 10 km | MT | 100.00 | 98.89 | 9,889 |
| 33 | Lead beyond 10 Km and up to 20 km | MT | 100.00 | 161.28 | 16,128 |
| 34 | Lead beyond 20 Km and up to 30 km | MT | 100.00 | 238.25 | 23,825 |
| 35 | Lead beyond 30 Km and up to 50 km | MT | 100.00 | 346.4 | 34,640 |
| 36 | Lead beyond 50 Km and up to 100 Km | MT | 100.00 | 584.54 | 58,454 |
| 37 | Lead beyond 100 Km and up to 150 Km | MT | 300.00 | 938.48 | 2,81,544 |
| 38 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km | 45000.00 | 3.6 | 1,62,000 |
| 39 | From Truck / Trailer | MT | 300.00 | 121.57 | 36,471 |
| 40 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 300.00 | 337.04 | 1,01,112 |
| 41 | All type of PSC sleepers | MT | 100.00 | 368.44 | 36,844 |
| 42 | P.Way fittings of all types and other similar loose items | MT | 100.00 | 343.98 | 34,398 |
| 43 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 240.00 | 868.52 | 2,08,444.8 |
| 44 | Tractor with Trolley for local transportation or other misc. works. | Hour | 160.00 | 194.7 | 31,152 |
| Schedule total | ₹77,92,748.32 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREItoVforIREPS_2.pdf
ATTACHMENT
JPOCircular.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].