REPAIR TO CHAJJA, ROOF PROJECTION, FACIA PLINTH PROTECTION, PLASTERING INCL EXTERNAL PAINTING TO OMQs, OFFRS MESS, SINGLE LIVING OFFRS ACCN, OFFRS GUEST HOUSE AND SAROJ, BENJAMIN AND GHUMAN COLONY BLDG IN DOMESTIC AREA AT AIR FORCE STATION UTARLAI

M&L For finishing the surface of wall including preparation of old plastered surfaces of walls have plain /stone grit plaster and applying one coats to achieve even shade and colour of 100% Premium acrylic emulsion paint exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces and application by hand with painting brush/roller complete all as specified and directed. (Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)

M&L for preparation of old decorated surfaces of wall of any description by rubbing down and cleaning the surface with water and applying one coat of oil bound distemper (shade as approved by GE) complete all as specified and directed. Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, mors and efforescent salts and treating oil and greasy spots and applying two coat of white wash on walls complete all as specified and directed. (Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)

All as per ser item No 3 above but on ceiling complete all as specified and directed.

M& L for chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying Fosroc Reebaklens RR rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: Reebaklens RR rust rust remover, Nitozinc primer of Fosroc or equivalent in Dr Fixit/ACC/L&T/STP/Sika India /Asian paints/bostik/Choksey chemicals/Thermax limited/ Hindcon Chemicals . Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)

Taking down cement mortar on brick or stone or pcc block wall etc including raking out joints, hacking for key, scrubbing down with water etc and including removal for debris and rubbish from the site complete all as specified and directed. (Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)

Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description complete all as specifed and directed by engineer-In-Charge. (Note : The work shall be carried out upto 9.0M height)

M&L for providing weld mesh size 100x100x3mm weld mesh fixing with shear connectors with 8mm dia reinforcement by drilling 75mm deep anchoring holes and filled with two component polyester resin anchoring grout (Two pack system consist of one part of resin and two part hardner) epoxy resin 200 gm per hole with CICO RESIFIX-G or equivalent in Fosroc/ Dr Fixit/Sika/ACC/STP as per manufacturers instructions including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. Make: CICO RESIFIX-G of CICO or equivalent in Fosroc/Dr Fixit/STP/Sika/ACC. (Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)

M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.00 M height and reinforcement bar shall also used as column/beam jacketing or other places as directed )

M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out as per manufacture instruction upto 12.0M height and no extra payment shall be paid on this account)