Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹81 L
EMD Value
₹6.0 L
Closing Date
25 Nov 2025, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aditya Kumar
SE Sultanpur Amethi Circle PWD Sultanpur
Special repair of Madhauli to Durgapur connecting road and replacement of the damaged culvert with a 2x2 meter RCC box culvert
2025_CEUFZ_1090313_1
3614/1com-Sul.A.Cir./2025-26 Dt 04.11.2025
Open Tender
Civil Works - Roads
Fixed-rate
60 days
Amethi
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
₹6.0 L
Yes
SE Sultanpur Amethi Circle PWD Sultanpur
26 Dec 2025
13 Nov 2025
25 Nov 2025
13 Nov 2025
25 Nov 2025
13 Nov 2025
18 Nov 2025
Earthwork in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre in depth and earthwork in embankment to be in 20cm. layers including ramming and dressing the surface to required levels and slopes and also including 1.5 metre lift and 30m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30m. distance as directed by the engineer in charge
Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam (G-2) specification including spreading in uniform thickness, hand packing rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density.
Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam (G-3) specification including spreading in uniform thickness, hand packing rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density.
Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specicification Clause 503.
Providing and laying rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggreates using VG-10 Bitumen to required line, grade and level to serve as wearing course on a previously prepared base by manual means, including mixing in a suitale plant, laying and rolling with a 3 wheel 8 - 10 tonne static roller capacity, finished to required level and grades to be followed by seal coat as per technical clause 508
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510
Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
Dimolishing Brick Work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. For Dismantling of Old Culvert
Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled material as directed by the Engineer-in-Charge within a distance of 60 metres (200 ft.) For Dismantling of Old Culvert
Laying rienforced cement concrete pipe 1000 dia NP3 for culvert on first class bedding in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. For Construction of Diversion
Construction of embankment with approved material obtained form borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 For Construction of Diversion
Brick on edge pavement with bricks laid dry joints filled with local sand including preperation base of proper slope and its ramming spreading blinding layer of 1 cm depth of local sand over sub-base including T&P etc rwquired for proper completion of work. For Construction of Diversion
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. For Construction of Box Cell Culvert
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. For Construction of Diversion
Plain Cement Concrete Grade M15 in Open Fondation complete as per Drawing and Technical Specifications. For Construction of Box Cell Culvert
Reinforced Cement Concrete Grade M30 in Open Fondation complete as per Drawing and Technical Specifications. For Construction of Box Cell Culvert
Reinforced Cement Concrete Grade M30 for wall & slab etc. complete as per Drawing and Technical Specifications. For Construction of Box Cell Culvert
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. For Construction of Box Cell Culvert
Drainage Spouts complete as per drawing and Technical specification. For Construction of Box Cell Culvert
Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification. For Construction of Box Cell Culvert
Providing and laying of Filter media with granular material/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. For Protection Work
Providing and laying Flooring complete as per drawing and Technical Specification laid over Cement Concrete Bedding. For Protection Work
Reinforced Cement Concrete Grade M25 for wall & slab etc. complete as per Drawing and Technical Specifications. For Construction of Box Cell Culvert
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 1.04 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_2002149.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .