Loading…
Loading…
Tender Value
₹29 L
EMD Value
₹2.9 L
Closing Date
12 Oct 2026, 12:00 pm
Office of the EE PD PWD Pratapgarh
Office of the EE PD PWD Pratapgarh
Restoration work on the boundary wall at the Inspection House, Patti.
2026_CEALD_1189352_1
3490/26M/E-Tendering/2026 Dated 11.09.2026
Open Tender
Civil Works - Buildings
Percentage
90 days
Pratapgarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹944
₹2.9 L
24 Sept 2026
24 Sept 2026
12 Oct 2026
24 Sept 2026
12 Oct 2026
24 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil (Exculding GST) | - | CUM | 115 | - |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (Exculding GST) | 145 | CUM. | 125 | ₹18,125 |
| 3 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides offoundation etc. complete for all lift. (Exculding GST) | 145 | cum | 405 | ₹58,725 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (Exculding GST) | - | cum | 4,400 | - |
| 5 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (All works upto plinth level. Concrete of M 25 grade with minimum cement content of 330 kg /cum all Work up to Plinth Level) (Exculding GST) | - | cum | 6,200 | - |
| 6 | same as above but All works upto plinth level. Concrete of M 25 grade with minimum cement content of 330 kg /cum all Work above plinth Level (Exculding GST) | 10 | cum | 6,400 | ₹64,000 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete (Exculding GST) | - | Sqm | 250 | - |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers (Exculding GST) | 181 | Sqm | 480 | ₹86,880 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts (Exculding GST) | 173 | Sqm | 620 | ₹1,07,260 |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. In SUBSTRUCTURE (Exculding GST) | - | Kg | 70 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
Tendernotice_2.pdf
PDF • 1.40 MB
BOQ_2240782.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .