Improvement of Smashan Ghat near Bhuteswar Temple in Ward No.15

Earth work excavation in hard soil for foundation within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed as per the specification approved by the department and transporting 5 km awau from work side as direction of Engg -in- charge.

Earth work excavation of foundation and plinth in ordinary soil with initial lead and lifted include rough dressing and levelling etc. complete.

Borrowing of good quality earth for horticultural purpose from other pale etc complete

Dismantling and removing lime concrete flooring 2.5 cm thick A.S. flooring including stacking the useful materials.

Dismantling brick or stone masonry in lime or cement mortar under 3mtr height including transportation up to 5 km.

Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge.

Providing and laying P.C.C. of (1:3:6) with 4 cm size crusher broken hard black granite metal with cost, conveyance, royalties, taxes of all materials, all labour,T&P etc. Complete as per direction of Engineer -in-charge.

Providing and laying R.C.C. work in M-20 grade with 20mm and down grade black hard granite crusher broken stone chips of approved quality from quarry with smooth centering and shuttering hoisting and laying in layers including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete With c& s as per direction of the Engineer-in-charge.

Column Footing

Plinth band

Super Structure Column

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification, including, cutting bending, binding & placing, the steal rods as per drawing technical specifications with cost of binding wire 18 to 20 gauges etc. complete.

Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

Fly ash brick masonary in Super srtucture in C.M. (1:6) -10" .

6mm thick cement plaster (1:4) to R.C.C surface finished smooth including claused deep chiping and slury treatment

12mm thick C:P (1:6) over brick workIncluding all cost conveyance, Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C.

16mm thick cement plaster (1:6) to R.C.C surface finished smooth including claused deep chiping and slury treatment

Supplying fitting fixing of M.S truss with I section pole including cost of material & labour charges, priming & colour etc complete.

Hoisting trusses and placing in position truss & purlin

Supplying and fixing Colour G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings

Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete.

Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc.

Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc

Supplying ,fitting & fixing of anti skid Vitrified colour printed series tiles in floors of size 600mm * 600mm of approved make confirming to IS:13755 lai on 20 mm thick cement mortar (1:4) .

Supply , fitting & fixing of anti skid vitrified colour printed series tiles in dadoes, skirting and rises of steps of size 600mm X 600mm of approved make confirming to IS:13755 laid on 12mm thick cement mortar (1:3)

white washing three coats with shell lime

Painting two coats with any approved colour of weather seal coat out side surface

Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surfacein

Wall Painting two coats with approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to outside suface.

providing and laying factory made chamfered edge cement concrete coloured pavor block 80 mm thick of M 40 grade of required strenth thickness and size/shape made by table vibratory method to attain superior smooth finshing using PU or equivlent moulds laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compacting by using plate vibrator, filling joints with fine cutting of of paver block as per required size/pattern, finishing and sweeing sand in foot path , parks , lawns ,drive ways or light traffic parking and lanes/ roads etc all complete as per specification and direction of E.I.C.

Supply,fitting & fixing of pre cast Kerb stone of size 300mm x 300mm x 150mm of M30 grade of approved make, desing,colour and size made by Block making mchine with proper compaction fixed in required pattern etc complete I all respect confirming to IS 5758 : 1984 providing and laying fcatory made kerb stone etc all complete as per specfication and direction of E.I.C

Please Enable Macros to View BoQ information