Supplying and Fixing of MS Doors at Various-Shops in MIDHANI Plant Hyderabad

AGREED TERMS & CONDITIONS

Tender Ref NO. MDNL/AP20251035/ELT/287/25-26

TENDER TITLE Supplying & Fixing of MS Doors at Various-Shops in MIDHANI Plant” Hyderabad -58

S.NO. Tender Requirement Vendor’s confirmation/ REMARKS in Max 500 Characters

*1 Work should be as per Midhani Tender Quantity and Specification without any deviation. SELECT

*2 UNCONDITIONAL ACCEPTANCE to eProcurement Notice Inviting Tender (NIT) and All the Terms and Conditions of the Tender. SELECT

*3 Basis of quoted prices. F O R (FREE ON RAIL/ROAD) MIDHANI. SELECT

*4 Payment terms as per NIT document SELECT

*5 Validity of Quote- 90 days SELECT

**6 Delivery as per NIT document SELECT

**7 SPECIFY OFFER MAKE and PRODUCT SPECIFICATION

**8 Indicate your GST No. C. E. REGN / E. C. C. No. HSN CODE No.

**9 HSN CODE No.

**10 Indicate Taxes and Duties applicable with rate percentage.

**11 Any Other Terms Condition/ Guarantee/ Price Variation/ Inspection

*Confirm your acceptance of our terms (sl no 1,2, 3, 4 & 5) by selecting AGREE option , if DISAGREE enter your remarks in respective cell.

** For Sl no 6, 7, 8, 9, 10 & 11 enter only remarks in respective cell.

AGREE/DISAGREE PRICE BASIS

DISAGREE Ex-Works

FOR Despatch point

Free delivery at MIDHANI STORE

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: AGM (I/C PURCHASE)

Name of Work: Supplying and Fixing of MS Doors at Various-Shops in MIDHANI Plant” Hyderabad-58 Note: Contractor has to quote overall price viz price + taxes + GST + Cess. The accuracy shall be up to two decimals

Tender Reference No. : MDN/PUR/AP20251035/ELT/287/25-26

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate per unit (Including Tax) In Figures To be entered by the Bidder Rs. P Discount (Per Unit in Rs.) Packing & Forwarding Charges (Per Unit in Rs.) SGST (Not in Percentage) (Per Unit in Rs.) (cenvatable) CGST (Not in Percentage) (Per Unit in Rs.) (cenvatable) IGST (Not in Percentage) (Per Unit in Rs.) (cenvatable) Frieght (Inclusive of all Taxes) (Per Unit in Rs.) Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. item1 3239.2 Kgs 0.0000 Excess(+) Full Conversion INR

2 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. item2 1.09 cum 0.0000 Excess(+) Full Conversion INR

3 Earth work in excavation of all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for lift upto 1.5m, as directed by Engineer-incharge. item3 0.72 cum 0.0000 Excess(+) Full Conversion INR

4 Disposal of excavated excess earth from the site including conveyance of materials up to an average lead of 1KM away from the site, and correspondiong required lift, loading, unloading etc complete as directed by the EIC. (The quantity is net quantity of capacity of truck after deduction of 20% for looseness) By mechanical transport including loading, unloading and stacking. (Lead upto 1KM away from the site) item4 1.81 cum 0.0000 Excess(+) Full Conversion INR

5 Providing and laying in position cement concrete of specified grade, work up to plinth level : PCC 1:4:8 (1 cement, 4 coarse Sand(Zone-III) derived from natural sources: 8 graded stone aggregate 40mm nominal size derived from natural sources) including curing levelling, etc., as directed by EIC item5 0.14 cum 0.0000 Excess(+) Full Conversion INR

6 Providing and laying Concrete of M25 grade (with minimum cement content of 330 kg /cum) in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, OPC, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement etc complete as directed by EIC item6 1 cum 0.0000 Excess(+) Full Conversion INR

7 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by EIC. (The cost includes providing gas cutting including gas bottles, welding machines, welding rods , all tools required is in the scope of contractor),Make: VSP/TATA/JINDAL (JSW). Material test reports to be submitted for the material brought to site item7 7045.73 Kg 0.0000 Excess(+) Full Conversion INR

8 Labour charges for structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The cost includes providing gas cutting including gas bottles, welding machines, welding rods , all tools required is in the scope of contractor. item8 239.2 Kgs 0.0000 Excess(+) Full Conversion INR

9 Providing & Painting synthetic enamel paint with two or more coats including one coat primer and surface preparation on MS door etc. item9 314.48 Sq.m 0.0000 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select %

Quoted Rate in Words

Please Enable Macros to View BoQ information