Karnataka

Financial Eval

Works

Other Works

Package No-03.1)Construction of CC Road in Kundargi LT-1 Village Bilagi Taluk. 2)Construction of One Room In Govt.Urdu Primary School In Basaveshwara Nagar Bilagi Town,Bilagi Taluk.

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Bagalkot, Karnataka

Amount: ₹20.3 LCloses: 16 Mar 2026Closed

Timeline

Published7 Mar 2026
Closed16 Mar 2026
Financial Evaluation—
Award—

Bids

1 Bid16 Mar 2026

#	Company	Amount	Status
1	Manjunath Kalasannavar ₹20.1 Laccepted-finance	₹20.1 L	accepted-finance

Tender Value

₹20.3 L

EMD Value

₹20,254

Closing Date

16 Mar 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRED BAGALKOTE

Office Number

Mobile Number

Work Description

Package No-03.1)Construction of CC Road in Kundargi LT-1 Village Bilagi Taluk. 2)Construction of One Room In Govt.Urdu Primary School In Basaveshwara Nagar Bilagi Town,Bilagi Taluk.

Tender Information

Tender ID

RDPR/2025-26/OW/WORK_INDENT22917

Reference Number

RDPR/2025-26/OW/WORK_INDENT22917

Tender Type

Reserved

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredPRED/KPWD CLASS-III AND ABOVE Registration Certificate

RequiredReserved FOR ST CATEGORY CONTRACTOR Cast certificate should apply

RequiredTo qualify for award of this contact each tenderer in his name should have in the 2020-21 to 2024-25 years period achieved in at least two financial years an average financial turnover of Rs.20.25 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified

RequiredThe Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2020-21 to 2024-25 25PERECENT of the Amount Put to Tender i.e Rs 5.06 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer District Level Officer and scan the Original Certificate and attach the scanned file to the Bid.

RequiredName and Address of Contractor for Communication

RequiredTenderer must Submit PAN & GST Certificate.

RequiredAssessed available tender capacity equal to AxNx5 - B

RequiredContractor should submit upload the difference amount as per the CSR 2024 25 in FDR

RequiredSite Inspection Photo and Certificate from Aee PRE Sub Div BILAGI

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

For Details Refer Tender Notification And Conditions In The Bid Documents.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Executive Engineer PRED Bagalkote has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc. decision of Executive Engineer, PRED, BAGALKOTE is final.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22 2022-23, 2023-24 & 2024-25 achieved in One financial year should be more than financial turnover of Amount put Tender Amount (in all classes of civil engineering construction works only)

Tenderer must submit copies of documents according to KW-1&2 document

The Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2020-21 to 2024-25(25% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

THIS WORK IS RANDOMISED AS ST CATEGORY OF WORK. HENCE ONLY ST CATEGORY OF CONTRACTOR SHOULD BID OTHER BIDDERS MAY BE CONSIDERED AS FRAUDULANT PRACTICES.

Single Tender Will Not Be Accepted

The Project Completion period is 3 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Work Completion/Execution Period 3 Months

This work is Randomized under LOT11815 Sl No38 23 and which is classified as :ST Category work. Hence this work is purely reserved for ST Category Bidders only.

For this work only eligible ST Contractor (with cast certificate) should apply

Videography and photographs in three stages should be taken and submitted along with the bill before starting, during execution and after completion of work in the presence of the section officer

All materials including complete with all lead and lift and as per the direction of Engineer in charge of work

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

Govt Order. No.FD 707 EXP-12/2024 BANGALORE DATE:05.11.2024

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹510

EMD Fee Amount

₹20,254

Important Dates

Last Activity

16 Mar 2026

Published

7 Mar 2026

Download Ends

13 Mar 2026

BOQ Preview

•

Construction of CC Road in Kundargi LT-1 Village Bilagi Taluk.

•

Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator. Ref to MoRT&H : IRC - 305.4.3

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

OTHER ITEMS - (CC Pavement, PMGSY Boards & Innovative Technology) - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base,...

•

Construction of One Room In Govt.Urdu Primary School In Basaveshwara Nagar Bilagi Town,Bilagi Taluk.

•

Earth work excavation by manual means for drains,canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading,...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = Foundation & Substructure

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = column

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = plinth beam

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = beam

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = slab

•

For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = chajja

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) i...

•

Construction of Embankment by excavating the available approved Gravel / Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...

•

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal siz...

•

Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with p...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Poviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per spe...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 ems c/c both horizontally and vertically fixed with chicken mesh for drop chajja, facia, backing to cup bo...

•

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and si...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with ,stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing ...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.12.68.1 125x65x2.12mm (PWD SR 2023-24 / Volumme II / I.NO-12.68.1 /P.NO-106)

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 10.6.3 Wedge expansion type Fastener w...

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR 2023-24 / Volumme II / I.NO- 12.62 /P.NO-105)

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42mm with suitable washers weighing not less than 33 gms (PWD SR 2023-24 / Volumme II / I.NO- 12.64 /P.NO-105)

•

Providing and fixing on wall face unplasticized Rigid PVC rain water pipes Confirming IS : 13592 Type A, including Jointing with seal ring Confirming IS : 5382, leaving 10mm gap for thermal Expansion...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using 1100V grade,copper conductor fexibele multistrand FRLS PVC insulated, 2 x 1.5 Sqmm cable conferming to GTP,with a ...

•

Mediumpoint above 3Mtr upto 6Mtr from tapping point to out let via switch (PWD BGM SR Electricl Pg.No.5 It.No.2.1.2)

•

Long point above 6Mtr upto 10 Mtr from tapping point to out let via switch (PWD BGM SR Electricl Pg.No.5 It.No.2.1.3)

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in a existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring ...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. -do- 10"x7"x3" ...

•

SupplyingandixingofPVCcasingandcappingonthewallorceilingusingnecessarymaterialslikebends,junctionbox,elbows,screwsatan interval of 300 mm as required. (PWD BGM SR Electricl Pg.No.3 It.No.1.8.2)

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GT...

•

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCB's single phase /...

•

Supplying And Fixing of regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts nuts etc.. With provision for fixing suitable type capacity MCBsingle phase / ...

•

Supplying and fixing of 5 -80 W of T8 Fluorescent Tube with 54W power consumption withlow 3mg Mercury content less phosphor coating Operating voltage range from 180 V to 265 V, 50HzA Cpower Supply. (P...

•

Fixingalltypesandallcapacitiesoffluorescent/falseceiling/spotlight/CFL/LEDfittingsindooronthewall/ceiling/rafters/girdersusing23/0.0076"twintwistedPVCinsulatedwires,requiredNosofround blocks and clamp...

•

Fixingaceiling/Wallmountingfanofallcapacitiesandalltypestotheexisting'S''hookwithfanregulatortotheexistingboardtogetherwithsupplyingandfixing5A.ceilingrose,necessarylengthof23 / 0.0076 inch PVC insula...

•

Supplyingcapacitortypeceilingfancompletewithdownrodblades,shackle,canopiesetc,foroperationon230V,50cycles.SinglephaseACsupplyconformingtoISS-374-1979andwithdoubleballbearingsystem. 56" Sweep (1400 mm)...

•

Supplying,fixing and wiring Residual current circuit breaker (RCCB) 240/ 450 V upto 300mA sensitivity on existing wood/ panel board. (Electrical SR P.NO-18 /I.NO-5.20.1)

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtr long buried in a pit. The pit should be...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-2 22917 ST.doc

Tender Document • 2.56 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Manjunath Kalasannavar

₹20.1 Laccepted-finance