Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹90.6 Laccepted-aoc | ₹90.6 L | accepted-aoc |
Tender Value
₹86.4 L
EMD Value
₹2 L
Closing Date
25 Mar 2026, 10:45 pmClosed
Mangaluru Urban Development Authority
commissioner muda
Proposed development work of kere at S.No.69/2 at Jappinamogeru, Mangalore
MNGUDA/2025-26/OW/WORK_INDENT85/CALL-2
MNGUDA/2025-26/OW/WORK_INDENT85/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
MNGUDA Commissioner Office Mangaluru
8 documents required · 8 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualif.y for the award of this contract each tenderer in his name should have in the last five years financial years Mandating satisfactory completion ( at least 90% Contractor value) as a prime contractor for at least one similar nature of any Pond/Lake work to an extent of 50% of the cost of the work of Rs. 43.18 Lakhs Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the perice level of the FY in which the tenders are invited.
To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-25) executed in any one year, the following minimum quantities of work Note Specify the principal items of works to be executed under this contract 1)EarthWork Excavation Embankment-3110.44 Cum 2) Desilting - 4218.64 3) RR/SSM Masonary-261.78 Cum 4) Pitching- 248.31 Cum 5) PCC/RCC-100.20Cum 6) TMT Steel - 2.62 Tonne
To qualif.y for the award of this contract each tenderer in his name should have in the last five years financial years achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 172.70 Lakhs. Updated to the FY in which the tenders are invited. Financial turn over of previous years shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. (usually not less than the estimated annual payments under this contract)
Liquid assets and /or availability of credit facilities of no less than Rs. 25.91 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value of Rs. 86.35 Lakhs. The available tender capacity will be calculated as under Assessed available tender capacity (AxNx1.5 - B)
₹2,160
₹2 L
25 Mar 2026
16 Mar 2026
26 Mar 2026
24 Mar 2026
23 Mar 2026
Proposed development work of kere at S.No.69/2 at Jappinamogeru, Mangalore
Bridge Maintenance & Testing - Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and ...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Mechanical Means -
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direc...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...
Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machin...
Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the existing tvvo verticle poles (M.S. rectangular ...
Fabricating,supplying and erection of ... ms longhotdipGalvanizedOctagonalhotdipPolewithBSEN 10025 gradeS355 JO steelplateforshaft, IS 2062 for base plate with door opening arrangements, including sui...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminarie sand mounted on Octagonal pole using necessary bolts, nuts etc., complete.
4.6.1Single Arm Bracket with 1000 mm ...
Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarb...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supply of LED Bollard light fitting of ...W with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartmentcomprising of antiglare clear diffuser with Injection moulded ...
GI Pipe B - Class as per IS-1239 GI Pipe 50mm
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.
25x3mm GI strip
LT UG cable 2 core 10 sqmm
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Short Term Tender Letter.pdf
Others - Short Term Letter • 0.85 MB
bid document KW-4 INDENT85-CALL2.doc
Tender Document • 3.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .