Karnataka

Active

Works

Buildings

Construction of four classrooms to the Govt PU Girls HS Sandur (29120710803) Enrollment 333 in Sandur Taluk Ballari Dist

Rural Development and Panchayat Raj Department

RDPR Division Office Ballari | Ballari, Karnataka

Amount: ₹52.2 LCloses: 17 Sept 20267d left

Timeline

Published2 Sept 2026
Closes17 Sept 2026
Bid Opening18 Sept 2026

Tender Value

₹52.2 L

EMD Value

₹1.1 L

Closing Date

17 Sept 2026, 4:30 pm7d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRE DIVISION BALLARI

Office Number

Work Description

Construction of four classrooms to the Govt PU Girls HS Sandur (29120710803) Enrollment 333 in Sandur Taluk Ballari Dist

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT29097

Reference Number

RDPR/2026-27/BD/WORK_INDENT29097

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Ballari

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredValid PWD Registration certificate of Class III or above

RequiredTo qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22,2022-23 2023-24, 2024-25 & 2025-26 a achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only usually not less than the estimated annual payments under this contract of Rs.52.18 Lakhs

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2021-22,2022-23 2023-24, 2024-25 & 2025-26 executed in any one year, the following minimum quantities of work Embankment/Earth Work -235.00 Cum 02. Steel- 8.49Tonne 03. RCC/PCC-111.00 Cum 04.Plastering 663.00 sqm 05. Flooring 271.00 Sqm 06.SSM/BBM 98.00 Cum

RequiredWork done certificate for satisfactorily completed as prime contractor, at least one similar work comprising of Construction of Building Work costing Rs.26.10 lakhs from competent authorities not below the rank of Executive Engineer or equivalent list of such works in FORMAT-2 in the last five years i.e. 2021-22,2022-23 2023-24, 2024-25 & 2025-26

RequiredThe Unconditional Bankers Certificate of Liquid Assets and or availability of credit facilities of no less than Rs.15.65 Lakhs Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

RequiredA site engineer having B.E Civil with minimum experience of 5 years in construction or Diploma in Civil Engineering with minimum experience of 8 years in construction

RequiredTenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under Assessed available tender capacity AXNX2.5-B

RequiredInformation on Existing commitments and on going works which are yet to be completed

RequiredExisting commitments and ongoing works which are yet to be completed

RequiredThe works for which tender acceptance letters are received are to be furnished

RequiredThe information of the works for which tenderer has already submitted tender are to be furnished.

RequiredThe information on litigation in which the Tenderer is involved are to be furnished.

RequiredName, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The tenderer should maintain the Road/Building during the defective liability period of one year from the date of completion of the work.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 (KW-1,2,3 &4 ) Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan & upload all the original documents required for this bid to the e-procurement portal. The Original Documents shall be produced at the time of opening of Bid for physical verification.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission.

The contractor should make arrangement for establish mobile quality control lab unit at site itself for conducting quality tests as per requirement at the cost of the contractor

The contractor should submit quality control reports, material test reports and photos along with the bill otherwise bills will not be accepted.

The work will be inspected by the Third party and the bill will be admitted only after the satisfactory quality report from 3rd party.

The contractor should follow items and conditions as specified in standard bid document KW-1-4

Successful bidder submitting bids below the amount put to tender will required to submit the difference amount in the form of FDR/DD Pledge (excluding Bank Guarantee) on the name of EE PRED BELLARY within 20 days from the date of receiving the letter of acceptance. Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. Cluase 25 of KW-1,2,3 & 4.

The Contractor Should Submit the MDP Receipts for the Material Used for the Work. Otherwise it will attract the Five times fine as per the Mines and Geology Dept

The Contractor shall pay liquidated damages to the Employer at the rate 0.01 % of Contract price per day stated in the Contract Data for each day that the Completion Date is later than the Intended Completion Date. The total amount of liquidated damages shall not exceed the amount defined in the Contract Data.

Time Period for Completion of Work is 06 Months including Rainy season

Technical Criteria

Capabilities of Vendor

Copy of Registration for having registered in PWD of Class III or above

PWD Registration Certificate (Class I/II/III/IV)

Certificate issued by the competent authority not below the rank of Executive Engineer for having executed in any one year,for a continuous period of 12 months the following minimum quantities of work To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2021-22,2022-23 2023-24, 2024-25 & 2025-26 executed in any one year, the following minimum quantities of work Embankment/Earth Work -235.00 Cum 02. Steel- 8.49Tonne 03. RCC/PCC-111.00 Cum 04.Plastering 663.00 sqm 05. Flooring 271.00 Sqm 06.SSM/BBM 98.00 Cum

Others -- Information in the prescribed format and certificate from the competent authority

Work done certificate for satisfactorily completed as prime contractor, at least one similar work comprising of CONSTRUCTION of Building Work costing Rs.26.10 lakhs in Last years 2021-22,2022-23 2023-24, 2024-25 & 2025-26 from competent authorities not below the rank of Executive Engineer or equivalent list of such works in FORMAT-2

Work Done Certificate

Financial Status

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22,2022-23 2023-24, 2024-25 & 2025-26 a achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only usually not less than the estimated annual payments under this contract of Rs 52.18 Lakhs

Audited CA Certificate of Annual Turnover

The Unconditional Bankers Certificate of Liquid Assets and or availability of credit facilities of no less than Rs.15.65 Lakhs Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

Line of Credit

Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under Assessed available tender capacity AXNX2.5-BwhereA is Maximum value of civil engineering works executed in any one year during the last five yearsupdated to price level taking into account the completed as well as works in progressN is Number of years prescribed for completion of the works for which Tenders are invitedB is Value at price level of existing commitments and on-going works to be completed during the next years period of completion of the works for which Tenders are invited

Audited CA Certificate of Annual Turnover

Others

A site engineer having B.E Civil with minimum experience of 5 years in construction or Diploma in Civil Engineering with minimum experience of 8 years in construction.

Others -- Information in the prescribed format supported by Degree/Diploma certificates & experience certificate

Information on Existing commitments and on going works which are yet to be completed

Others -- Information on Existing commitments and on going works which are yet to be completed

Existing commitments and ongoing works which are yet to be completed

Others -- Existing commitments and ongoing works which are yet to be completed

The works for which tender acceptance letters are received are to be furnished

Others -- The works for which tender acceptance letters are received are to be furnished

The information of the works for which tenderer has already submitted tender are to be furnished.

Others -- The information of the works for which tenderer has already submitted tender are to be furnished.

The information on litigation in which the Tenderer is involved are to be furnished.

Others -- The information on litigation in which the Tenderer is involved are to be furnished.

Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer.

Others -- Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer.

Fee & Financial Details

Tender Fee Amount

₹1,310

EMD Fee Amount

₹1.1 L

Important Dates

Last Activity

4 Sept 2026

Published

2 Sept 2026

Bid Opening

18 Sept 2026

Download Ends

17 Sept 2026

BOQ Preview

•

Construction of four classrooms to the Govt PU Girls HS Sandur (29120710803) Enrollment 333 in Sandur Taluk Ballari Dist

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Forming groove of uniform size in the top layer of plaster as per approved attern including repair to the edges of panels and finishing the groove complete as per specifications an...

•

Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with p...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing wall black board in 12mm thick with CM 1:3 and applied with primer and two coats of acrylic emulsion black paint including finishing etc complete .

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...

•

Forming groove of uniform size in the top layer of plaster as per approved attern including repair to the edges of panels and finishing the groove complete as per specifications an...

•

Providing wall black board in 12mm thick with CM 1:3 and applied with primer and two coats of acrylic emulsion black paint including finishing etc complete .

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Newly Constructed Roof/Bathroom/Toilet/balcony/utility with Cementatius Waterproof coating - Below 500 m2 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementit...

•

Providing wall black board in 12mm thick with CM 1:3 and applied with primer and two coats of acrylic emulsion black paint including finishing etc complete .

•

electrification

•

Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75x75x65mm

•

supplying and fixing PVC/metal Conduit Deep Junction Box 19/20 mm Deep Junction Box

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

•

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped fan regulator

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch

•

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts,50Hz AC supply & completely wired on existing box.

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit s...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@

•

Fixing a ceiling /wall mounting fan of all capacities and all types,

•

with necessary clamps and 'S' hook made out of 15mm dia MS rod,

•

with 5 A. ceiling rose of approved quality with necessary length of...

•

Refilling available earth around trenches/pipelines, cables in layers not

•

exceeding 20 cms in depth, compacting each deposited layer by ramming after

•

watering with a lead upto 50 m, and lift upto 1.5 ...

•

Providing and fixing brass bib cock of approved quality :. Complete 20 mm nominal bore

•

Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 g

•

Providing and fixing ball valve (brass) of approved quality, High or low

•

pressure, with plastic floats complete 25 mm dia Nominal Bore

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply, including all CPVC

•

plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply, including all CPVC

•

plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

•

amendments and conveying to worksite, rolling and lowering into

•

trenches, laying true to line and level and perfect linking at joint...

•

Constructing masonry Chamber 30x30x50 cm inside, in brick

•

work in cement mortar 1:4 (1 cement :4 coarse sand) with C.

•

I. surface box 100x100 x75 mm (inside) with hinged cover fixed in

•

cement concrete ...

•

Providing and fixing white vitreous china pedestal type water closet

•

(European type) with seat and lid, 10 litre low level white vitreous china

•

flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan )

•

with 100 mm sand cast Iron P or S trap, 10 litre low level white

•

P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

•

taps, 32 mm C.P. brass waste of standard pattern, including painting of

•

fittings and brackets, cutting and making good the w...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass

•

(of approved quality) complete with 6 mm thick hard board ground fixed

•

to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing PTMT towel rail complete with brackets fixed to

•

wooden cleats with CP brass screws with concealed fittings arrangement

•

of approved quality and colour 450 mm long towel rail with t...

•

Providing and placing on terrace (at all floor levels) polyethylene

•

water storage tank, IS : 12701 marked, with cover and suitable locking

•

arrangement and making necessary holes for inlet, outlet and ...

•

Laying,Lowering and jointing of S&S RCC SPUN / VIBRATED CAST PIPES

•

(REINFORCED) pipes NP-3 Class ,rolling and lowering into trenches,

•

laying true to line and level at both destinations and jointing of...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-3 29097 2026-27 GEN.doc

Tender Document • 0.49 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .