PROVN OF RAIN WATER SHED IN KB ROAD, FENCING IN HUDSON LINE AND SOAK WELL, VEH SHED (OFFRS MESS) AT 25 WEU, FENCING AT CHILDREN PARK AT BARABANKI AND GEYSER FOR JCOS/OR MD ACCN AT FAFA AND BS MARG UNDER GE (EAST) LUCKNOW

Amount

Surface dressing not exc 15cm deep any type of soft/ loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm and removing surplus soil to a distance not exc 50m and depositeing where directed making good surface in soft/loose soil, complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in filling foundation and mass concrete etc complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in coping , benching of manhole and similar, complete all as specified and directed.

S&F mild steel angles/flat iron as in fencing post and struts including embeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, Fe 290 Gde E-165, complete all as specified and directed.

Fixing only chain link of fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only chain link of fencing of 75mm x 75mm mesh size (oblong) of 3-4mm dia GI wire wire complete all as specified and directed.

M&L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated sheet sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and directed.

S&F MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle of Fe 410-w (Gde E 250) quality A complete all as specified and directed.

Cutting chases, pinning in brick walls for concealed water tubing making good to facings where required and pointing in CM 1:3 cutting not exc 10cm girth complete all as specified and directed.

Cutting chases in brick walls , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, cutting not exc 10 cm girth complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, exc half brick but not exc one brick deep complete all as specified and directed.

S&F 2 mm thick Fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, fences etc complete all as specified and directed.

M&F for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry, with grey cement and pigments, laid over 15 mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed.

S&F shower enclosure of 12 mm thick toughened glass, frosted, edge moulded with sliding arrangements, stainless steel handles suitable for shower enclosure, SS beadings, rollers for sliding and necessary fittings and fixtures, rubber packings etc complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.5 m depth, for laying of drain pipes etc & for manhole etc, not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

S&F 150mm internal dia, Salt glazed & stoneware drain pipe grade ‘A’, laid in trenches and jointed with cement joints complete all as specified and directed.

M&L concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C-2 and testing including necessary form work complete all as specified and directed.

Returning, Filling in soil including spreading, leveling, watering and well ramming in players not exc 25cm complete all as specified and directed.

Removal of excavated surplus material to not exc 50m distance and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foudations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6. including dismantling complete all as specified and directed.

M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surface in CM 1:4 with water proofing compound and finishing the surface even and smooth with using extra cement complete all as specified and directed. (Note:- WPC shall be measured and paid sepearetely only)

M&L for rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.

M&L for RCC 1:2:4 type ‘B-1’ (using 20mm graded stone aggregate) as in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab complete all as specified and directed.

M&L steel TMT of any dia, cut to length, bent to shape required, including cranking, hooking for ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L soakage well 3.00 meter dia and 4.5 meters deep below inlet pipe level (depth from inlet pipe to ground level 45 cms) including excavation and earth work in any type of soil PCC in foundation brick work in honey combed and solid brick work in cement mortar, RCC slab with RCC manwhole cover factory made complete all I as per TD of CELZ.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, surface finished fair and even complete all as specified & directed.

M&L hard core of gauge not exc 63mm, deposited spred and levelled in layers not exc 15 cm thick ,warered and rammed to a true surface complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over 20mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F 0.71mm thick plain aluminium sheeting alloy 31000H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for cutting GI Pipes and reducing to required length of dia 20/15 mm bore and inserting Tee of suitable size complete all as specified and directed

S&F of stop valves, 15 mm bore chromium plated, cast copper alloy, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F of gun metal gate valve with iron wheel hand, screwed both ends,complete for size 15 mm bore including connecting materials complete all as specified and directed

S&F of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer complete all as specified and directed.

S&F plug top 15 Amp, 230 Volt, 50 Hz capacity plug all as specified and directed.

S&F 600mm long steel connection pipe hot series with both side nut with rubber washer suitable for 25 Ltr geysers complete all as specified and directed

M&L for sub main wiring with 2.5 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match complete all as specified & directed.

S&F of Bib taps 15 mm bore, ISI mark, cast copper alloy, chromium plated Fancy type handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply, laying, jointing & testing galvanised iron tubing of 15mm bore medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc as required at site laid in walls through proper clamps complete all as specified and directed

S&F switch piano flush type, 16 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S&F outlet 2 in 1, 3 pin, 06 & 16 Amp, flush type, 230 volt complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6mm thick terminal boxes concealed on wall/floor/ceiling, with 3 mm thick laminated sheet top cover ISI marked for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash complete all as specified and directed.

All as per item No 50 above but 5 Amp socket outlet independent.

All as per item No 50 above but on the same board.

All as per item No 50 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sqmm connected to common earth dolly.

All as per item No 50 but three module

All as per item No 50 but six module

All as per item No 50 but eight module

S&F terminal box suitable three modular plate of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

Supply and fix terminal box suitable six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

Supply and fix terminal box suitable eight modular plate of including cutting, grooving and plastering etc. complete all as specified and directed.

S&F modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

S&F modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

S&F for modular socket 2/3 pin combined 6 Amp, 230 Volts AC 50 HZ SP two modular type complete all as specified and directed.

S&F for modular socket 2/3 pin combined 6/16 Amp, 230 Volts AC 50 HZ SP two modular type complete all as specified and directed.

S&F PVC ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals complete all as specified and directed.

S&F lamp holder (ISI Marked) PVC/Polycarbonate type with with back plate suitable for batten fittings complete all as specified and directed.

S&F LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as specified and directed

S&F MCB DB SPN (double door) 8 Ways with minimum capacity of 200 amps including bus bar dummy plate and necessary civil works complete all as specified and directed.

S&F MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

S&F MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

S&F ceiling fan complete with electronic type regulator and accessories 230 V,1200 mm sweep BEE 5 star rated including all electrical connection with required wire complete all as specified and directed

S&F wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and directed

M&L for wiring with two single core 4 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 4 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

M&L for wiring with two single core 6 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 6 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

S&F exhaust fans single phase 380/450 Volts heavy duty steel body of sweep 1400 RPM ISI marked and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed

M/S S S A ASSOCIATES

m/s raghubar dayal

M/S Reliance Construction