SPECIAL REPAIR TO BLDG NO. P-80 OFFRS MESS, PROVN OF INTERLOCKING PAVER BLOCKS HARDSTANDING FOR PATIENT VEH PARKING AND PROVN OF TOILET BLOCK NEAR MI ROOM AT MH KAMPTEE UNDER GE KAMPTEE.

Amount

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

All as per Item No. 02 above but as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match .over &incl 10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

M& L 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, skirting and like over and including 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Machine cut cudappah stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other simillar situation, complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and as directed.

Material and labour for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in CM 1:4 (Using old size brick) complete all as specified and directed.

Labour only for Taking down Aluminium door complete carefully of any description & size and refixing in the other opening after necessary repair required for smooth functioning.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Supply, fabrication and fixing anodised aluminium powder coated doors fixed or openable including frame/chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 1.59mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No-3 - 01 No and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items complete all as specified and directed.

S&F 5.5 mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane,complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S& F 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and as directed.

M&L aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed.

Supply and fix aluminum (colour powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodized aluminum snap beading and connected locking arrangement complete all as specified and as directed Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminum alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated : Jindal or techno commercially equivalent in specified makes.

S&F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete.

S&F 35 mm thick second class hard wood Glazed and skeleton factory made shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and as directed.

S & F 150 mm long SS handles complete all as specified and directed

S & F 250 mm SS, sliding door bolt, fixed complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.

Supply & fix 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

Supply & fix 100 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F 5 to 6 mm thick solid PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling in multiple layers made of G.I. grid as per manufacture instruction,specification and drawing incl GI grid complete all as specified and as directed.

M&L for 12 mm thick POP false ceiling in multi layers inclding two coats of oil bound distember over a coat of primer as per manufacturin instruction specification over and including GI gride complete all as specified.

Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

M& L Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Taking up or down 15 mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and as directed.

Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed mineral wool pre-formed `SNAP-ON' pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

M&L for cutting chases for concealed water tubing15 mm or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3.complete all as specified and as directed.

S & F waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and as directed.

Supply & fixed wall mounted vitreous china wash down water closet with 'P' trap round of size 620 x 360 x 780 mm along with soft close seat cover and twin flush ( Aquafier EWC P trap) white colour with all fittings including joining mild steel CP or aluminimised hinging device, complete all as specified and directed.

Supply & fixed in repairWash Basin oval type (56x41cm), (Make : Hindware) (CAT No. F-10017 or equivalent in CERA) including Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed

Supply only pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and directed. Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera.

S & F PVC connection 15 mm dia, 450 mm / 600 mm long including PTMT check nut ,complete all as specified and directed.

Supply & fix in repairs stop valves/angle cocks, 15 mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fancy type, chromium plated with long shank and cup (concealed type)and fixed all as specified and as directed.

S&F 2-way angle cock with flange 15 mm dia Chromium plated fancy type, complete all as specified and directed.Make:- Prayag Cat part No 7711 or equivalent.

Supply and fixing in repair CP bib cock with flange 15 mm dia screwd for iron pipe or for brass ferrule and fixed , complete all as specified and directed. Make : Prayag cat No 6512 or equivalent

Supply & fixed in repair towel rail complete all as specified and directed. Make:- Prayag Cat part No BA-40 or equivalent in Hindware / Cera.

S&F wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed.Make:- Jaquar cat part No FUS-29281 or equivalent.

Supply & fixed in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S & F health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed. (Make: Prayag cat no BEA-40.

Supply & fixed in repair Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply & fixed in repair cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make : Prayag Cat Part No 551 eqavanent

Supply & fixed in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

Supply & fixed in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make prayag cat No BEA 44 or equivalent

S&F 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

Supply & fixed in repair 75 PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply & fixed in repair110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

Supply & fixed in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F PVC cowl slotted vent cowl 110 mm size complete all as specified and as directed.

Supply and fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

Supply and fixing 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

Dismantling water tanks of capacity exc 250 ltr but not exc 500 ltr complete all as specified and as directed.

S & F 500 ltrs capacity Rotational moulded polyethylene water storage tanks white colour triple layers (Cylindrical vertical with closed top) hoisted and fixed in position including connections and 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc, complete all as specified and directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 25mm dia complete all as specifed and directed.

S&F CP grating of size 100mm dia complete all as specifed and directed complete all as specifed and directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) , as in sub base in floor/paving etc complete all as specified and directed.

S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

Material and labour for preparation of newly plastered surface on wall and applying two coats of distemper oil emulsion over a coat of primer over one coat of wall care putty of not less than 2.0 mm thick including preparation of surfaces complete all as specified and directed.

Material and labour for applying three coats of white wash over newly plastered surface of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer

Complete removal of existing from old plastred wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of surfaces complete all as specified and directed

Material and labour for 4mm thick Non Asbestos, fiber cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

Material and labour for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

All as per item No 92 above but herein before, but 6 to8 mm dia TMT bars as in stirrups, spacers and binders, complete all as specified and as directed.

All as per item No 92 above but 8 to 10 mm dia TMT bars as in stirrups, spacers and binders, complete all as specified and as directed.

Supply and fix wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

Surface dressing not exceeding 15 cm deep in soft/loose soil ,removal of shurbs ,vegetation ,tree roots if any ,getting out and removal to a distance not exceeding 50 mtrs , complete all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc., n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc 3.00 m in depth for foundation etc., n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil all as specified and directed.

Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundation, mass concrete and filiings, complete all as specified and directed.

Material and labour for Use and waste of formwork to sides of concrete foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. for a rough finished surface of concrete,all as specified & directed.

All as per item No 100 above but to sides of columns, pillars, piers, posts and struts etc., all as specified and as directed.

All as per item No 100 above but to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work, complete all as specified and directed.

All as per item No 100 above but in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Material and labour for reinforced cement concrete1:1.5:3 Type A1 (nominal mix) using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., all as specified and as directed.

All as per item No 104 above but in columns, pillars, piers, posts and struts etc., all as specified and as directed.

All as per item No 104 above but in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc., complete all as specified and directed.

All as per item No 104 above but to the soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping, and similar works not exc 200mm thick flat & with fair finished surfaces of concrete etc., complete all as specified and as directed.

All as per item No 104 above but to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, complete all as specified and directed.

Material and labour for Moorum / red bajri brought from outside MD land as in filling under floors / pavings / berms, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed.

Material and labour for hardcore of gauge not exc 63 mm, broken stones or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor and similar location all as specified and as directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm , laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 15mm thick in CM 1:6 all as specified and directed.

Material and labour for glazed ceramic coloured tiles (digital printed design) of size 450x350x7 mm on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10 mm thick screed bed in CM 1:4 all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 mix type C2 using 20 mm graded stone aggregate as in plinth protection and surface to be finished fair and even including joints at every 2.5 m and at all corners filled with 85/25 grade bitumen and sand mixed in 1:2 ratio by weight complete all as specified and as directed.

Material and labour for cleaning the newly plastered surfaces of roof slab, Chajja, canopy, parapet etc., thoroughly with wire brushes and providing water proofing treatment , complete all as specified and directed here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick approved APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints on traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Painting with one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coats of aluminium paint @ 100ml/Sqm (e) 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane.

Supply and fix brass chromium plated tubular towel rail D type 20mm dia 600 mm long between flanges including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

Supply and fixing Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim, etc, complete all as specified and directed.

Material and labour 25mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor including taking up or down steel tubing and connections, complete all as specified and directed.

Material and labour 32mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor including taking up or down steel tubing and connections, complete all as specified and directed.

Supply and fixing in repair Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe,with bottle trap, CP grating and Union for discharge pipe, complete all as specified and directed.

Supply and fixing 15 mm bore CP Urinal spreader for urinals, complete all as specified and directed.

Supply and fixing SS Soap dispenser bottle fixed to plugs with chromium plated brass screws , complete all as specified and directed. (Make: Prayag cat no BEA-20 or equivalent.

Material and labour precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid sepratly), complete all as specified and directed.

Material and labour for precast reinforced cement concrete 1:11/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in manhole cover slab and baffle wall etc, set in cm (1:4), including provision of necessary formwork , complete all as specified and directed. Note : Reinforcement shall be measured and paid for separately.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channels and drains , complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc , complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm bore , complete all as specified and directed.

Reinforced concrete NP2 drain pipe, 200 mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately) , complete all as specified and directed.

M&L for Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore , complete all as specified and directed.

M&L for Excavating over areas, n exc 1.5 m deep and getting out Hard/Dense soil complete all as specified and as directed.

M & L for Plain Cement concrete in sub bases/pavings Type D2 1:4:8 (40mm graded aggregate) all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block colour glessy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade ® with Grey cement and pigment with and including 50mm thick sand coushining under the paver block complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft/loose soil complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe-410- W(Gde- E-250) quality-A etc complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240

S&F mild steel screw bolt,5 to10mm dia machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square nut nexc 5cm long.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil, complete all as specified and directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft and loose soil

M&L for laying 150 mm RCC NP 3 pipe and jointed in cement mortar and tested on completion all as specified and as directed.

M&L concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested. of 150mm bore complete all as specifed and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame(including dummy switches where required) any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 148 above but One ceiling/exhaust fan point controlled by oneway switch complete all as specified and as directed.

All as per item Sl No 148 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed.

All as per item Sl No 148 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed.

All as per item Sl No 148 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall/Ceiling/surface of the following sizes :- 2x6.0 Sqmm with earth wire of 1x6.0Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same

All as per item No. 152 above but sumain of size 2 x 4.0 Sqmm with earth wire of size 4.0 Sqmm complete all as specified and directed

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and as directed.

Supply and fix Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and as directed.

S&F for socket modular type single pole one way 6/16 amp 3 pin 2 module, 250 volts AC suitable for modular switch boxes all as specified and as directed by EIC.

Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specified and as directed.

M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with the following items complete all as specified and directed for: Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. Modular metal flush box with modular cover plate with frame 3 module. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item no 160 above but Modular metal flush box with modular cover plate with frame 4 module. complete all as specified and as directed.

All as per item no 160 above but Modular metal flush box with modular cover plate with frame 6 module. complete all as specified and as directed.

All as per item no 160 above but Modular metal flush box with modular cover plate with frame 8 module. complete all as specified and as directed.

All as per item no 160 above but Modular metal flush box with modular cover plate with frame 12 module. complete all as specified and as directed.

Supply and Fix Highly durable surface mounted 09/10 watts LED 2 feet batten constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed

Supply and Fix Highly durable surface mounted 18/20 watts LED batten constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

S & F LED light fitting 9W/10W bulkhead luminaires with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230 V 50 Hz complete all as specified and directed.

Supply and fix aesthetically designed wall mounted light with warm white lighting with holder and bulb 240 V, 50 Hz complete all as specified and directed. Cat No DWL-GLD-WL00002TAE27 Jaquar or equivalent in other specified makes.

Supply and fix aesthetically designed wall mounted light with warm white lighting with holder and bulb 240 V, 50 Hz complete all as specified and directed. Cat no DWL-AMB-WL00002SYE14 Jaquar or equivalent in specified makes

S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed.

S & F COB LED downlighter decorative type recessed mounted 3W, 240 V , 50 Hz warm white complete all as specified and directed.

S & F COB LED downlighter recessed mounted 6W, 240 V , 50 Hz warm white complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F Exhaust fan PVC body with louvers 230mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed.

S&F Exhaust fan metal body with louvers 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed.

M&L for making hole of suitable size for 230mm sweep exhaust fan and including grouting bolts, cutting chasing and plastering, painting etc., to match with the existing surface, complete all as specified and as directed.

Supply and Fix Wall fan 400 mm sweep Dusty Rose white colour with 3 blades 220 V, 50 Hz complete with guard set, guard ring, mounting frame etc including making connection from ceiling rose/socket outlet as directed complete all as specified and as directed. Model -AINDRILA of Havells or equivalent.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. complete all as specifieds and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar and including dummy MCB plate flush /surface mounting, double door complete all as specified and as directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA complete all as specified and as directed.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 13,575.90]

S R BUILDERS

M/s Jagdish Staioners and General Stores

DEESHA CONSTRUCTIONS

M/s M.G. Hargunani

Varsha G Nagphase

Bidder Name

DEESHA CONSTRUCTIONS

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/s Rana Construction

Varsha G Nagphase

S R BUILDERS