Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-Finance N A | NA | NA | 121004 | ₹3.7 L | L1 | Accepted-Finance BIDDER IS LOWEST AND WITH IN PROVISION |
| Sl No | Description | Qty | Unit | DINESH PAL SINGH L1 |
|---|---|---|---|---|
| 1.00Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | ||||
| 1.02 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 12 | Cum | 2,800 ₹33,600 |
| 2.00 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 14 | Cum | 300 ₹4,200 |
| 3.00Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : | ||||
| 3.01 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | Cum | 12,000 ₹12,000 |
| 4.00 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). | 6 | Cum | 12,700 ₹76,200 |
| 5.00Centering and shuttering including strutting, propping etc. and removal of form for : | ||||
| 5.01 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | 36 | Sqm | 800 ₹28,800 |
| 5.02 | Columns, Pillars, Piers, Abutments, Posts and Struts | 5 | Sqm | 1,100 ₹5,500 |
| 6.00Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. | ||||
Tender Value
₹3.6 L
EMD Value
₹7,127
Closing Date
21 Feb 2026, 6:00 pmClosed
Executive Engineer Civil
Executive Engineer Civil CTO Compund BSNL Civil Division Agra
Construction of 15 mtr RTT Dismantling of existing tower at JDN College, BA-Agra.
2026_BSNL_898539_1
26/2025-26/EE/TCAG
Open Tender
Civil Works - Others
60 days
Agra
2 documents required · 2 mandatory
₹590
Accounts Officer Cash, O/oGM, BSNL Agra UP
₹7,127
2 Apr 2026
14 Feb 2026
24 Feb 2026
14 Feb 2026
21 Feb 2026
14 Feb 2026
14 Feb 2026 - 21 Feb 2026
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for :
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
6 mm cement plaster of mix :
1:3 (1 cement: 3 fine sand)
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm).
Credit of old un- serviceable/ serviceable materials recovered from dismantling / demolishing from work and available at site .
Old rusted ( unserviceable ) C.I/S.C.I pipes and fitting , Mild Steel / Steel Section, G.I/M.S pipes,Iron sheets, GS Sheets etc.
Arranging welding machine for welding of Broken steel componants such as Handels, fastners, hinges, grills, etc.as and where required as per the direction of Engineer-in-Charge. (rate includes labour & transportation of machine at site).
Fixing base plate, templates and all anchor bolts etc. for stem of roof top tower foundation including placing in extremely accurate positioning, leveling etc. complete as per direction of engineer-in-charge(Rate includes for fixing all 16 nos. anchor bolts, templates for 04(Four) legged tower etc. complete).
Labour for hoisting, fixing and erection of 15 meter heigh Roof Top Structrual Steel Tower as per approved drawing with all its necessary components viz. Antenna fixtures, climbing ladder, platforms with railing, and fixing with bolts, nuts, plain and spring washers. Cost includes necessary welding and alternation of any mismatching holes to the members wherever required complete in all respect as per direction of the Engineer - in - charge. (NOTE: Rate includes cost of all operations involved in hoisting and erection of tower including hire and labour charges of tools, plants and machineries all insurance, safety provision, acceptance testing, labour for loading , unloading and lifting from ground floor to second floor roof of building etc.(all complete and nothing extra shall be paid.)
Supplying at site after fabrication MS sheet templates as per drawing (3.15 mm thick) having holes at appropriate location for fixing 32 mm dia anchor bolts in tower foundation of roof top tower all complete as per direction of engineer-in-charge.
Supplying G.I. Angles etc for tower / nuts and bolts with plain and spring washers conforming IS specications of various sizes as required for erection of steel communications tower.
Mechanical transportation of tower members comprising MS angles , flats , plates, pipes nuts and bolts etc. of varying sizes and lengths from work site (JDN College,Agra) to SSA,Store Agra or any other location as per direction of Engineer-in-Charge. The entire lot of tower members shall be transported in a single lot . The Job includes cost of collection of all members with required lead, loading and unloading, weighing at loading site & unloading site both, preparing and submitting the list of materials to store In-charge & Engineer-in-Charge, depositing the tower members at the desired location complete as per directions of Engineer -in-charge. (Nothing extra shall be paid over and above the rate on any account).
Dismantling the existing 15 meter roof top tower (1 sets) at second floor of rented Telephone exchange building in Agra including staking of tower material within lead of 50 meter ,all complete as per direction of E-IN-C (Item includes all labour, T&P required for above operation including dismantling of cement concrete foundation.)
Mechanical transportation of 15 MTR RTT ,tower members comprising MS angles , flats , plates, pipes nuts and bolts etc. of varying sizes and lengths from work site /Store(Ghaziabad,UP) to JDN College,Agra/SSA/OA Store or any other location as per direction of Engineer-in-Charge. The entire lot of tower members shall be transported in a single lot . The Job includes cost of collection of all members with required lead, loading and unloading, weighing at loading site & unloading site both, preparing and submitting the list of materials to store In-charge & Engineer-in-Charge, depositing the tower members at the desired location complete as per directions of Engineer -in-charge. (Nothing extra shall be paid over and above the rate on any account).
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.07 MB
nit26Tdocu.pdf
Tender Documents • 27.62 MB
BOQ_944464.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid