Fencing around the Left side arm of Arjuna River portion in Irunkkagudi Reservoir in Sattur Taluk of Virudhunagar District

Earth work excavation for foundation in all kinds of soil and subsoils except hard rock requiring blasting full depth as may be directed and depositing the surplus earth in places shown by the engineer in chareg of work and levelling the same with all leads and lifts including shoring, strutting, shuttering bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated, etc., complete complying with technical specifications and drawings as directed by the engineer in charge of work.

Providing and placing Plain Cement Concrete M 10 grade using well graded aggregates of nominal maximum size of 40mm and downgraded to I.S specified grading ( To achieve the specified charaterstics strength of 10N/mm² in 28 days ) and mixing the ingredients in approved mixer including dewatering of the placement site by bailling / pumbing and diverting wharever necessary, placing concrete in layers, compacting, watering, curing, finishing the surface with all leads and lifts etc., complete as directed by the Engineer in charge of works and as per the technical specifications.

Supplying and fixing New G.I pipe post using G.I pipe of approved quality and good variety ISI brand "B" class pipes of the following sizes for fencing post including cutting the pipe to required length fixing the pipe to plumb in the existing holes and laying the concrete. The rate is inclusive of cost of G.I pipes, including conveyance to work site and labour charges for cutting the pipe to required length and fixing in position as directed by the Departmental officers. etc., complete. (TNBP N. 86 ) 50 mm dia G.I pipe post. (M-0434 )

Supplying and fixing new 6 mm thick M.S chain link fencing of approval gauge with angle above ground level and tying the same with an angle including the cost of MS flat making holes on the flat cost of bolt nut 40 nos washer etc to size of the chain link fenching is 2 " x 2" x 10 gauge

Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters. at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. -Single leaf of size 1.00m x 2.10m.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

GST 18% in Figures