REPAIR TO SANITARY FITTING, FLOORING AND MULTIFARIOUS B/R REPAIR WORKS TO OTM MD ACCN AT 508 ABW CHHEOKI UNDER GE (W) PRAYAGRAJ.

Amount

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Description same all as per Item No 4 here in above but except brick (brick used obtained from demolition) complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.

M&L for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.

M&L for Preparing new wall surface and applying two coats of OBD over a coat of primer and over 3 mm wall care putty complete all as specified and directed.

M&L for preparation of new surface and providing and applying and painting one coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 3 mm thick putty existing on cleaned/primered surface by Mechanical spraying/painting machines) as per manufacturer,s specifacation etc. all complete including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and providing and applying and painting two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 3 mm thick putty existing on cleaned/primered surface by mechanical paint sprayers on exposed brick wall/ plain wall surface) as per manufacturer,s specifacation etc. including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces and providing and applying and painting two coat of oil emulsion distemper over a coat of coat 3 mm thick putty in required shade and even finish on over existing cleaned/primered surface by Mechanical paint sprayers on exposed brick wall/ plain wall surface) as per manufacturer,s specifacation etc. including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed

M&L for preparation of old surface of steel and iron materials by brooming down or steel wire brushing ,scrapping downsmoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted by Mechanical paint sprayers complete all as specified and directed

M&L for preparation of old wooden surface of any description not other wise described over 10 cm width or girth and applying two coat synthetic enamal paint over a coat of primer complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.

Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course of floor and other similar works complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm,in floor ,wall etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for non skid joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed

M&L for Glazed ceramic coloured tiles 300 mm x 200 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for joint free vitrified ceramic coloured tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Endura floor tile size 300mmx300mm and 25 mm thick laying in floor as per manufacturer instruction complete all as specified and directed

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified and directed

S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

Supply and fixing in repair vitrieous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' trap or 'S"' trap complete all as specified and directedS

S&F in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on existing bracket, fixing of tap, waste fitting,pipe and union complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified and directed

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

S&F for 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

S&F for 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F in repair for 15mm bore fancy type bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair CP angle stop valve or cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F in repairs fancy type Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.

S&F in repair for 90 to 125 mm size fancy type chromium plated shower rose with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S&F for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel fixed in floor with over all length of cover plate 140mm fixed in repair complete all as specified and directed

Dismantling of stone slab and tiles of any description or thickness in floor/ aprons etc laid bedded and painted in any mortor complete all as specified and directed

M&L for 18-20mm thick granite(of any type) work table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixureof pigment to match with shade of granite complete all as specified and directed

S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified and directed

S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc complete all as specified and directed

S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified.

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F in repair stainless steel plate rack (utensil rack) of size 900mm X 750mm X 260mm made out of stainless steel 0.63mm thick fixed with brass screw complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc.1 sqm not exc. 2 sqm each complete all as specified and directed

M&L for 30mm thick flush shutter,solid core construction with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.

S&F for 35 mm thick factory made 2nd class hard wood glazed and skelton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F for 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F for 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.

S&F in repair two way angle valves /tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed. Make: Prayag/ Ideal Orient/ Plumber.

S&F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified and directed

S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.

S&F for Anodised aluminium frame powder coated for doors, windows, ventilators, partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F for anodised aluminium powder coated window and ventilator shuttrs, side hung type, without sash,aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long(1no), hinges type B 21 100mm long( 2no) suitable handle (1no) complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

(A) Area not exceeding 2.00 sqm each

(B) Area exceeding 2.00 sqm each

S&F for 3mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F for including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed

Dismantling of AC sheet corrugated/semi corrugted sheets in wall cladding or in roof covering complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

S&F for 100 mm hasp & staple sfety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F for 100mm size stainless steel handle cast type polished bright complete all as specified and directed.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F for solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for flooring 100mm thick Cement concrete type C-2, 1:3:6 using 40mm graded aggregate complete all as specified and directed

M&L for 75 mm thick cement concrete type D-2, 1:4:8 using 40mm graded aggregete as in sub base of flooring complete all as specified and directed.

M&L for 75 mm thick cement concrete type B-2, 1:2:4 using 20mm graded aggregete as in flooring complete all as specified and directed.

Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc complete all as specified and directed.

M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Discinnecting existing tanks capacity exc 500 ltrs & n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc, and hoisting if required reconnecting and refixing in position (cleaning measured separately) complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water storage tank of 500 to 1000 ltrs capacity and from mouth of curculating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY patern and refixing the cover after cleaning complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.

M&L for coloure chequered cement concrete tile 300x300x25mm thick set and jointed and pointed in cement mortar with grey cement and Pigment laid over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete al as specified and directed

S&F for 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

M/S CHANDRIKA PRASAD AND SONS (BID ID -3137479)

Channa Brothers and Co. (BID ID -3137409)

DKS ENGINEERING WORKS (BID ID -3143775)

M/S Amar Enterprises (BID ID -3137256)