WBPWD/EE/AED /eNIQ-85/2024-25

Amount

Supply 1.1 kv grade 4 core 70sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as per GS.(From Sub panel to VTPN)

a)Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc.

S&F 12 way Vertical TPN PBDB with 3 phase in coming & TP/SP outgoings, as follows with vertical type busbar system, in SS enclosure (IP-43 protection) (Make:- Legrand/ABB/L&T) double door comprising of neutral link incl. & provision for earthing attachment concealed in wall after cutting the brick wall and mending good the damages to original finish incl. interconnection with suitable size of copper wires and earthing attachment. Incoming-415V, 10KA, 125 A,4 pole MCCB ----1 no Outgoing- 415V, 10KA, 63A T.P MCB C curve ---12 (make: Legrand/Schneider/Siemens)

Supplying and fixing of 415 V 32A Four Pole MCB With suitable size enclosue of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Legrand/Schnider/L&T).

Supplying and fixing of 415 V 16A Four Pole MCB With suitable size enclosue of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Legrand/Schnider/L&T).

Supply & Fixing of 3ft x 1 ft GI Angle Iron frame from floor welded and 6 inch grouted in floor and mending good damages after work with main switch connection including painting & necessary nuts & Bolts as per direction of EIC 40x40x6 with necessery welding. (make: Approve make, as per choice of EIC))

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 4 X 10sqmm. + 2 X 6sqmm.(For VTPN to 32A FP)

b) 4 X 6sqmm. + 2 X 4sqmm.(For VTPN to 16A FP and TPN)

c) 2 X 2.5sqmm. + 1 X 1.5sqmm.(For 15A PP and Wall fan)

d) 2 X 1.5sqmm. + 1 X 1.5sqmm.(For Sep PP )

Cutting channel of 40 mm x 40 mm size on masonary wall incl. S&F heavy guage polythene pipe dia as stated below by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. Mending good damages to building works. [For AC point (a) 19 mm dia 3 mm thick polythene pipe with out earth continuity wire.

Supply & Fixing 25mm size dia PVC rigid Conduit pipe ( Precision make ) on wall and mending good the damages as to original finish as to GS.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]).(Black/Gray colour) A) Avg.Run- 8 Mtr.

B) Avg.Run- 10 Mtr

On board plug point with 5A 3/5 pin modular type plug socket(Black/Gray colour)

Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (For power point).

Supplying & fixing of 250 V 2 X 6 A modular type Switch, 2x6A 5 pin plug socket (make:Approve) fixed on suitable size 6 M modular type G I switch board with top cover plate flushed in wall incl. mending good damages to original finish.(Black/Gray colour).

S & F Angular Holder with 9W LED lamp.( make: Phillips/CG/havells)

S & F of Twin LED Fittings with 2x18W 2100 lm 1200 mm long PC body retrofit type tube light with box type metallic fittings as approved by P.W.D. (make: Phillips / CG/ Havells/Magik). With 2 years warranty.

S & F of 60W IP66 rated Full metal body circular type LED Flood Light with hing arrangement suitable for fixing on Iron structure. (make: Phillips/Crompton/Jaguar /Magik) with 5years warrenty.

S&F Industrial Wall fan EPC make 24 inch dia 600 mm 4 blade 160Watt 230V 1420 rpm wall munting air circuleted fan with clamp(Average length of two piece suitable for holding MS steel structure above ceiling as per direction of EIC approved specification,fabrication with suitable MS flat,painting incl.mending good damages to the building(EPC/Crompton/Usha). With 2 years warranty.

S & Fixing metal body exhaust fan, Louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia as follows (make: EPC Heavy duty/HAVELLS/CROMPTON) 18 "exhaust Fan( 920 RPM) With 2 years warranty.

Supply and fixing compression type brass gland and fininshing the end of the cable by means of crimping method as to G S. 4 core 70 sqmm

S&F of required size solderless Cu socket of following Cu wires. a) 6sq mm

b) 1.5sq mm

c)2.5Sqmm

d) 10 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.65mm dia

Add GST @18% On total from item no 1 to 20.

Add LWC @1% On total from item no 1 to 21.

MONDAL ENTERPRISE (BID ID -5911301)

R.K.ENTERPRISE (BID ID -5905828)