SPECIAL REPAIRS TO BLDG T-10-12/A UNDER GE MINNIE BAY, SRI VIJAYA PURAM

Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled Mild Steel Joist,channel,angle or tee sections,fixed independently ,without connecting plates,etc (cut to ordinary lengths i.e within 20 mm of the length indicated) Fe 410-W (Gde E-250 quality -A) complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks forportions framed and hung asgates, including pintle hinges, stops,hand-made sliding bolts, etc.and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed.

M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia, as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and coping beam stanchions complete all as specified and as directed.

M&L RCC M25 grade (Nominal Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L RCC M25 grade (Nominal Mix) using 20mm graded stone aggregate as in columns, pillars, piers, post and struts etc complete all as specified and as directed.

M&L RCC M25 grade (Nominal Mix) using 20mm graded stone aggregate as in cantilever,lintel beam over 1.50 mtr complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed.

S&F aluminium flat 40 X 6mm size as wind tie fixed with 50mm/75mm aluminium self staging screws complete all as specified and as directed.

Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed.

Taking down cement plaster on walls any description incl racking out joints hacking for key and scrubbing down with water etc. all as specified and as directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 (river sand)and finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster on fair faces of concrete block masnory in CM 1:4 (with river sand) mixed with WPC as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid seperately

Supply only water proofing compound all as directed.

M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. Make :- Asian Apex Ultima,berger weather coat long life flexo

M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. Make :- Asian Apex Ultima,berger weather coat long life flexo

M&L preparation of newly plastered wall surfaces and applying two coats of OBD over a coat of primer and putty all as specified and directed (Wall care putty can be measured and paid separately). Make - Apcolite advanced premium emulsion,Berger

M & L Complete removal of existing treatment and applying two coats OBD over a coat of primer and putty over old surface of wall all as directed by the Engineer-in-charge and as per manufacturers instructions (wall care putty can be measured and paid seperately)

M&L for Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth etc., complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specially provided, complete all as specified and

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbished off the premises all as specified and directed.

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed.

S&F UV acrylic coating SPC (Stone Polymer Composite) floor planks of size 181 x 1220 x 5 mm thick of approved shade laid on existing floor after cleaning the surface thoroughly,by laying SPC planks using runner adhesives,incl wastage and removing old flooring and clearing debris complete all as specified and directed.

M&L for 600 x 600 x 12-15 mm thick heavy duty vitrified Exterior Chequred tiles as in Floor/wall set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortor in CM 1:6 complete all as specified and directed.

ditto as per item above but in vertical surface (dado/skirting) to match the shade of floor tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

M&L for Non skid joint free coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cenment slurry over & including 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement to match etc., complete all as specified and directed.

M&L for glazed ceramic tiles 600x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed.

M&L Granite (of any type) 20 mm thick machine cut fixed on steps/riser, slab,window cill etc , bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, moulding & polishing over and including 20 mm thick screed in CM (1:4) etc., complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.

Taking down 20mm Steel / CPVC tubing and connections complete all as specified and as directed

Taking down 25mm Steel / CPVC tubing and connections complete all as specified and as directed

Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified.

S&F 20 mm CPVC Pipe outer dia Brass Elbow all as directed.

S&F 20 mm CPVC Pipe outer dia Brass Elbow reducer(3/4 x1/2) all as directed.

S&F Male Brass Threaded Adaptor (MTA/MBTA) 20mm bore CPVC outer dia all as directed.

S&F Male Brass Threaded Adaptor (MTA/MBTA) 25mm bore CPVC outer dia all as directed.

S&F Female Brass Threaded Adaptor (FTA/FBTA) 20mm bore CPVC outer dia all as directed.

S&F Female Brass Threaded Adaptor (FTA/FBTA) 25mm bore CPVC outer dia all as directed.

Supply and fixing 20 mm CPVC outer dia Brass Tee all as directed.

Supply and fixing 25 mm CPVC outer dia tank Adaptor all as directed.

Supply and fixing 25 mm CPVC outer dia Union all as directed.

Supply and fixing 20mm CPVC outer dia union all as directed.

S&F frameless,shatter resistance Acrylic mirrors of size 8' x 4' feet and 3.00-4.50 mm thick high strength and ultra clear Visibility mounted vertically in wall surafces completely all as specified and directed by Engr-in-Charge.

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and as directed.

S&F Vitreous China urinals size 480x300x740mm with fixing accessories set all as complete all as specified and as directed. Model No: Jaquar URS-WHT 13255

S&F Vitreous China wash down water closet pan (pedestal pattern) of size 380x610x805mm Rimless bowl with cistern for coupled, WC with UF soft close slim seat cover hinges, dual flush cistern fitting, conversion bend , fixing accessories and accessories set complete all as specified and as directed. Model No: Jaquar VGS-WHT 81753S250UFSMZ

S&F PVC connections 15mm size with PTMT nuts of length 600mm Complete all as specified and directed.

S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type etc., complete all as specified and directed. Model No: Jaquar COP-273PM

S&F in repair Wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc., complete all as specified and directed.

S&F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc., complete all as specified and directed.

S&F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc., complete all as specified and directed.

S&F in repairs stop valves 15mm dia cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc., complete all as specified and directed.

S&F in repair two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc., complete all as specified and directed.

S&F in repair overhead shower 120mm round shape, single flow (ABS body chrome plated with grey face palte) with rubit cleaning system including wall mounted shower arm casted 190mm long flat shape, wall flange and suitable for 15 mm bore pipes complete all as specified and as directed. Model No: Jaquar OHS-1789, SHA-483

S&F in repair brass chromium plated telescopic Hand shower (Health Faucet) with 1 Meter long Easy Flex Tube in Chrome Finish & wall Hook all as specified. Model No: jaquar ALD-565

S&F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed etc., complete all as specified and directed.

S&F in repair Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws etc., complete all as specified and directed.

S&F in repair Corner glass shelf high quality of 5mm thick glass & CP railing with bracket etc., complete all as specified and directed. Model No: Jaquar ACN-1173

S&F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges etc., complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap diameter of out let 110 mm ,plain with grating including jointing with solvent cement fixed in cement concrete etc., complete all as specified and directed. (Note :- Cement concrete shall be measured and paid seperately.

Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar etc., complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid intrenches or in floors all as specified.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid intrenches or in floors incuding necessary clamps all as specified.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps and fittings etc to fixing on walls all as specified.

S & F 110 mm bore PVC (SWR) bends of any radius all as directed.

S & F 75 mm bore PVC (SWR) bends of any radius all as directed.

S&F PVC SWR reducers one end 110 another reduced 75mm all as directed.

S & F 110 mm bore PVC (SWR) Vent Cowl all as directed.

Dismantling of wall and ceiling boards (fiber, pulp , insulation etc)or insulation boards /slabs /blankets any thickness including cover fillets, grid work any description and any position all as directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, With Fully perforated 12mm thick thick micro tegular design and patterns or 10mm thick Square Edged GRG False Ceiling tiles having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame but wood grain printed PVC sheet used instead of plain colour sheet as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC Sheet fillet of width 35mm for wall panelling incl of fixing to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F 4mm thick ACP (Aliminium Composite panel) sheet with 0.55mm thick skins in cladding of columns/posts/walls,ceilings roof etc fixed to frame complete colour all as specified and directed by Engr-in -Charge.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed.

N&L Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing all as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge Note :- All joints should be filled with Silicon sealent.

Supply and fixing factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing factory made UPVC white colour Sliding window of area Exc 2.00 sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories with drainage facility,glazing beading and sides to be filled with silicon sealent complete all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

Providing and fixing factory made UPVC white colour Sliding window of area n exc 2.00 sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories with drainage facility,glazing beading and sides to be filled with silicon sealent complete all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

S&F Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in nexc 0.5 sq.m in each pane all as directed.

S&F Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane all as directed.

Supply and fix in SS wire cloth 0.36 mm in nominal dia of wie avg width of aperture 1.40mm and fixed in tinned tacks af ss wire staples of steel shutters or fixed with wooden beads to wooden joinery complete all as specified all specified and directed.

Supply and Installation of 50mm PVC venetian blinds,Wood Finish with manual contyrol mechanisam (for raising /lowering) and a tilt wand (for Slat Angle control) all as per site requirement all as specified and directed by Engr-in-Charge.

Please Enable Macros to View BoQ information