Providing and Laying Interlocking Cement Concrete Paver Blocks for the Development of the Finished Goods Storage Area at the Back Side of WC-3, ALIMCO, Kanpur

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 50 cm measured at a height of 3.00 m above ground level and removal of rubbish and disposal of Dismantled/Unserviceable Material outside of ALIMCO Campus as per Government Guide Line including Supply of labour and T&P etc Complete.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 45 cm deep and disposal of rubbish, disposal of Dismantled/ Unserviceable Material outside of ALIMCO Campus as per Government Guide Line including Supply of labour and T&P etc Complete. All kinds of soil as directed by Engineer-incharge. All kinds of malwa and tree trunks

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil and tree trunks

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in Foundation and UP to Plinth

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Below plinth level and Superstructure. -Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer in- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Painting with synthetic of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture make: Asian

Providing Labour for repairing old damaged interlocking and dismantling work at jointo suitable place for (8 Hours Working Per Day) complete with all Respect