EEE-III/RZ/NZ/TC/2022-23/01.4

Amount

Supplying and erection of galvanized D-iron complete with shackle insulator (75 x 90 mm ) GI bolt and nut coach screws etc as required.

Wiring for sub-main with 2 x 25 Sq. mm single core two wires over head PVC insulated Al. conductor wire with 10 SWG dia G.I. bearer wire by providing cleats at a distance of one meter on existing pole etc. as reqd.

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd.

SITC of 60 watt LED street light luminaire fitted with lens made of pressure die casting aluminium housing & toughened glass cover with following specification & fixing on existing pole complete with connections as reqd (a) Total system wattage =60 watt + 5 % (b) luminous efficacy > 95 lumens/watt (c) Power factor = > 0.9 (d) Protection level - IP 66

P/f of hot press sheet moulded compound (SMC) fire retardent (temp. resistance upto 200 C) , IP-55 weather proof pole box of inner dimention 300 mm X 200 mm X 105 mm (NS) complete with suitable arrangement for fixing 4 nos. SP MCB &63 Amp.Double pole isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with 2 nos. MS clamps with SS back plate of suitable size with Danger plate, Monogram property printed on the cover etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(a) 100Amp,16KA,TPMCCB

Earthing with G.I. earth pipe 4.5 mtr long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and laying earth connection from earth electrode with 6SWG dia GI wire in 15mm dia GI pipe with FRL Som earth electrode i/c connection with G.I thimble excavation and refilling as required.

Supply & Erection of R.C.C/.PCC pole of length exceeding 8 mtr but not exceeding 11 mtr in brick blast and renaming foundation I/C excavation and refilling etc as reqd finishing with 150 mm thick cement concrete (1:3:6) layer on top.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sqmm

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:- 4C x 25 sqmm

Fabrication, supplying and fixing class B galvanised single overhang arm bracket made out of 250mm long galvanised top tube with cap and 1000mm long 32 mm dia galvanised pipe with tightening bolts complete as required.

Fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length,, 6 Amp. SPMCB ‘C’ characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmm cable. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS. (a) 8.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick

Providing and laying in position 1:2:4 grade reinforced cement concrete foundation of size 600 mm (L) ×600 mm wide and 1200 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 1160 mm long(approx)-8 nos. and reinforcement of cold twisted bars of 8 mm dia- 1600 mm (approx) -8 nos.(with 150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts 20mm dia, 750 mm long, J type i/c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing DCW HDPE for cable entry and exit as required for 7m and 8 mtr pole.

S/F 40mm dia GI pipe medium class along with the pole/wall for cable protection i/c painting etc as required.

Providing and fixing name board made of MS sheet 90*60 cm,1mm thick with frame of MS angle 50*50*6mm, two diagonal braces at bthe back of the sheet of MS flat 40*6mm ,total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4(1 cement:coarse sand:4 graded stoneaggegate 20mm nominal size) 30*30*45 cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer,painting with syntheic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of Engineer-in -charge.

ACE ENGINEERS BUREAU