Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹48.6 L
EMD Value
₹97,200
Closing Date
30 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Garrison Engineer (AF) Hakimpet
Garrison Engineer (AF) Hakimpet 500014
SPL REP REPLACEMENT OF ALUMINUM WIRING WITH COPPER WIRING IN CERTAIN BLDGS AT AFS HAKIMPET
2026_MES_791384_1
8120E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Garrison Engineer (AF) Hakimpet
AS PER NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer (AF) Hakimpet
₹97,200
Yes
9 Oct 2026
9 Oct 2026
2 Nov 2026
9 Oct 2026
30 Oct 2026
23 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed ( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per contract schedule of credit materials against contract agreement or taken on ledger with approval by Engr-in-charge). | 956 | Point | - | - |
| 2M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable on surface/cocealed in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC conduit of dia 20/25mm with proper saddles 30mm distance minimum, surface type terminated proper PVC junction boxes and in sunken type GI sheet metal flush boxes of 1.6mm thickness flushing in wall with proiper finishing and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- 1.Makes of PVC Conduit:- Finolex/AKG Plastic/Kalinga Gold platic or equivalents as approved.2.Makes of Copper wires:- Finolex/Polycab/Havells as approved NOTE FOR ITEM NO. 2,3,4 & 27 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & core cutting wherever required including making good the disturbed surface in CM 1:4 and finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) The decision of surface/concealed/PVC conduit/PVC casing rests with the Engineer-in-charge.For conduit, screws/saddles of minimum 30x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20/25mm dia. | |||||
| 2.01 | (iii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'.
(iv) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box.
(v) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IR
value shall not be less than 1M-ohm. | - | - | - | - |
| 2.02 | One light point controlled by one; one way switch. | 584 | Point | - | - |
| 2.03 | One buzzer point controlled by one; one way switch. | 36 | Point | - | - |
| 2.04 | One light point controlled by two two way switches | 9 | Point | - | - |
| 2.05 | One fan/exhaust fan point controlled by one, one way switch | 208 | Point | - | - |
| 2.06 | One 3 pin socket out let 5 amp point on the (same board) with other switches. | 172 | Point | - | - |
| 2.07 | One 3 pin socket outlet 5 amp point on the independent board | 244 | Point | - | - |
| 3 | All as per item No. 2 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board. | 144 | Point | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.57 MB
BOQ_889467.xls
BOQ • 0.30 MB
Tenderdocuments8120.pdf
Tender Documents • 0.68 MB
Scheduleofcredit8120.pdf
Additional Documents • 0.19 MB
SummaryPage8120.pdf
Additional Documents • 0.08 MB
NIT8120.pdf
Additional Documents • 0.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .