REPAIR TO WALL SHELF FLOORS PLINTH PROTECTION SHED ETC IN PUBLIC UTILITY BLDGS AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Dismantling Plain or corrugated steel sheeting of any gauge & any thickness, including Nainital or similar pattern of roof coverings including ridge, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed by Engr-in-Charge

M&L for Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic coloured designer seamless tiles 300x450x7mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM (1:4), complete all as specified and directed by Engineer-in-Charge.

S&F Mirror polished Machine cut kota stone slab high gloss finish flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick screed in CM (1:4) including rubbing and polishing, complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick screed in CM (1:4), complete all as specified and directed by Engineer-in-Charge.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) 10mm thick screed including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite,complete all as specified and as directed by Engr-in-charge.

Chequered cement concrete tiles 30cm x30cm x 25mm thick,with gray cement and pigment set, jointed and pointed in neat cement slurry in floors like in cement mortar (1:6) 10mm thick screed etc complete, all as specified and directed by Engineer-in-Charge.

M&L for liquior finish/glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50mm thick sand cushion etc,complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old decorated plastered or un-plastered surfaces of walls pillasters, cornices etc two coat of destempering 1st quality acrylic distemper (Ready mixed) having VOC content less than 50 gms/liter of approved manufacturer of required shade and colour complete all as per manufacturerer instruction over a coat Birla White Wall Care Putty ( thickness as required at site to make the surface even and smooth) on prepared wall/celling over prepared surface of wall complete all as specified and as per manufacturer’s instruction, complete all as specified and directed by Ensgr-in-charge.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick/stone/boulder masonry, built in cement mortar including all quoins,arches,pillars,etc,but exceeding ashlar facings,dressed stone work and precast concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and pavings,n exc 15 cm thickness (below or ground level), complete all as specified and as directed by Engineer-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 (40 mm graded stone agg) as in plinth protection, Hard standing finished even and fair complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick cement concrete type B-0, (1:2:4) ( 12.5 mm graded aggregate ) as in sub floors,complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing,complete all as specified and as directed by Engr -in-charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe),complete all as specified and as directed by Engr-in-charge.

S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe,complete all as specified and as directed by Engr-in-charge. .

S&F in repair fancy type 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions,complete all as specified and as directed by Engr-in-charge. .

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area,complete all as specified and directed by Engr-in-Charge.

M &L for Rendering 15 mm thick other than fair faces of brick work or concrete surfaces in cement mortal (1:4) for external brick with even & smooth surface with scafolding and all necessary arrangements all as specified.

Material & Labour for 10mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed by Engr-in-charge. .

M&L for preparation of newely plastered wall surfaces and applying two coats of cement Base paint over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing plastered or unplastered new surfaces of walls and applying two coats of oil bound distemper,complete all as specified and directed by Engineer-in-Charge.

Dismantling MS Work of any description not otherwise provided for all,complete as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engr-in-charge.

M/S KUMAR AVINASH (BID ID -3329029)

M/S ASHA ENTERPRISE (BID ID -3329730)

M/S AMARNATH AGARWALLA (BID ID -3329179)

M/S New Builders Corporation (BID ID -3332510)

LALAN SHARMA (BID ID -3332567)

M/S SINGH ENTERPRISE (BID ID -3331078)