Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹12.7 L+₹2.8 L (29.0%)Rejected-Finance | L2 | Rejected-Finance Rejected being not lowest bidder | |
| 3 | L3₹15.5 L+₹5.6 L (57.5%)Rejected-Finance | L3 | Rejected-Finance Rejected being not lowest bidder |
Tender Value
₹14.3 L
EMD Value
₹29,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KIRKEE
Headquarters CWE Kirkee, Military Engineer Services, Range Hills Road, Kirkee, Pune-411003
PROVN OF GUARD ROOM WITH ATT TOILET FOR 01 X NCO AND 06 X OR AT ME LINE OF 512 ARMY BASE WKSP UNDER GE (CENTRAL) KIRKEE
2022_MES_534598_1
CWE/KKE/TOKEN-12 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KIRKEE
AS PER TENDER DOCUMENTS
5 documents required · 5 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹29,000
Yes
25 Aug 2022
29 Jun 2022
28 Jul 2022
29 Jun 2022
26 Jul 2022
13 Jul 2022
30 Jun 2022 - 6 Jul 2022
Amount
Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil completed all as specified and directed by Engr-in-charge.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in Soft/ loose soil completed all as specified and directed by Engr-in-charge.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard/ dense soil completed all as specified and directed by Engr-in-charge.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Hard Rock completed all as specified and directed by Engr-in-charge.
M& L for PCC 1:4:8 type D2(40mm graded aggregate) as in fdn filling and mass-concrete completed all as specified and directed by Engr-in-charge.
M& L for Damp proof courses to horizental or vertical surfaces including necessary form works in cement concrete 1:2:4 type B0 using 12.5 mm aggregate for 40mm thickcompleted all as specified and directed by Engr-in-charge.
Returning filling including spreading, levelling and well ramming in layers not exc 25cm completed all as specified and directed by Engr-in-charge. Note :- soil obtained from excavation against sl No 1, 2 and 3 of BOQ
Removing excavated rock material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point completed all as specified and directed by Engr-in-charge. Note:- soil obtained from excavation against sl No 1, 2 and 3 of BOQ)
M&L for RCC M-25 (design mix) using 20mm graded aggregate B1,20mm graded aggregat) as in Columns, footings pillars, piers, posts and struts completed all as specified and directed by Engr-in-charge.
M&L for RCC M-25 (design mix) using 20mm graded aggregate B1,20mm graded aggregat) as in Beams, cantilevers, bressummers, lintels over 1.5m span completed all as specified and directed by Engr-in-charge.
M&L for RCC M-25 (design mix) using 20mm graded aggregate B1,2 0mm graded aggregat) as in Slabs supported on walls, beams and columns in floors, roofs, chajjas,lintel, landings, balconies, canopies, deck slabs and in shelves and the like completed all as specified and directed by Engr-in-charge.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth/roof beams; and similar work; vertical or to batter for flat and Rough finished sur faces of concrete completed all as specified and directed by Engr-in-charge.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs,chajjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces completed all as specified and directed by Engr-in-charge.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces completed all as specified and directed by Engr-in-charge.
M&L for Mild ctd steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT steel of grade Fe 500/Fe 500 D/Fe 550/ Fe 550 D meeting all requirements of IS 1786 completed all as specified and directed by Engr-in-charge.
All as per Item No 13 but 6mm to 8mm dia, completed all as specified and directed by Engr-in-charge.
M&L for Brickwork with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 completed all as specified and directed by Engr-in-charge.
M&L for or supply of Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering completed all as specified and directed by Engr-in-charge.
M&L for hard core of gauge n.exc 63mm , degorited spread and levelled in layers n.exc 15mm thick watered and rammed to a tree surface with broken stone or boulders completed all as specified and directed by Engr-in-charge.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in sub base of floor 75mm thick completed all as specified and directed by Engr-in-charge.
M&L Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar (1:4) completed all as specified and directed by Engr-in-charge. Note:- Colour and shade shall be approved by GE.
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:3) completed all as specified and directed by Engr-in-charge.
M&L Glazed ceramic coloured tiles non skid of size 400x400x7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles completed all as specified and directed by Engr-in-charge. Note:- Colour & shade as approved by GE.
M&LGlazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm /300X450X7mm thick or equivalent (in pattern as approved by EIC) set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:3) completed all as specified and directed by Engr-in-charge.
M&L for10mm thick rendering on fair faces of concrete surfaces in cm 1:6 finished even & smooth w/o using extra cement completed all as specified and directed by Engr-in-charge.
M&L for rendering(10mm+5 mm) thick on fair faces of brick work or concrete surfaces in CM 1:4 in two layers on external surface even & fair and using integral water proofing compound completed all as specified and directed by Engr-in-charge.. Note:- Integral water proofing compound shall be paid and measured seperately.
M& L for 5mm thick rendering on fair faces of concrete surfaces in cm 1:3 finished even & smooth w/o using extra cement in ceiling completed all as specified and directed by Engr-in-charge.
Supply only Integral water proofing compound ISI marked completed all as specified and directed by Engr-in-charge.
M & L for Preparing surfaces and applying two coat of oil boun distemper over 3mm thick wall care putty on wall white or tinted over a coat of primer on walls completed all as specified and directed by Engr-in-charge.
M & L for Preparing surfaces and applying two coat of oil bound distemper over 3mm thick wall care putty on wall white or tinted over a coat of primer on ceiling completed all as specified and directed by Engr-in-charge.
S&F in repair MS window guard bars and similar articles confirming to Fe 290 square or round match to existing all as specified and directed by Engr-in-Charge.
M & L for Preparation of wooden Surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coat of Synthetic enamel paint over a coat of pink primer and completed all as specified and directed by Engr-in-charge.
M & L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer etc completed all as specified and directed by Engr-in-charge.
M & L preparation of new plasterd surfaces of wall and applying two coats of waterproofing exterior emulsion paint over two base coat/ two coats of primer as per manufacturer direction, and as specified and directed by Engr-in-Charge. (Make ;- Apex Ultima Protek Asianpaints, Nerolac excel top guard, Berger weathercoat long life 10 yrs) completed all as specified and directed by Engr-in-charge. Note;- (i) filling of cracks,holes and dents are includes in the same rates.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on Roof surface even & fair and using integral water proofing compound completed all as specified and directed by Engr-in-charge..
M&L for water proofing treatment over RCCslab by applying oil based bituminous primer surface @ 0.25 kg/sqm and laying 3 mm thick APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.5 kg/sqm reinforced with non woven polyster reinforced mat weighting not less than 160 gms/sqm polyster core having soften point not less than 1500C, longitudinal tensile strength not less than 650N/5cm, by torching method and applying a coat of solar reflective alumunium paint @ 0.15kg/sqm on membrance surface including 24hrs ponding test complete all as specified and as directed by the Engr-in-Charge
S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) completed all as specified and directed by Engr-in-charge.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) completed all as specified and directed by Engr-in-charge.
S&F PTMT butt hinges 100 mm long complete all as specified and directed by Engr-in-Charge.
S&F PTMT Tower bolt 200mm long complete all as specified & directed by Engr-in-Charge
S&F PTMT pressed handle 150 mm size oval type stove enamelled black complete all as specified & directed by Engr-in-Charge.
S&F for aluminium anodized three track sliding window with two or more shutter with 4mm thick plane glass, one shutter of stainless steel mosquito proofing stainless steel wire cloth of 0.36 mm nominal dia and average aperature 1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-charge.
S&F for aluminium anodised louvered ventilator with 4mm thick pin headed glass and 100mm wide glass strips, white framed and fixed with aluminium anodised frames etc stainless steel wire cloth of 0.36 mm nominal dia and average aperature 1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified complete all as specified and directed.
M&L15-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement 10 mm thick mortar (1:3) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite completed all as specified and directed by Engr-in-charge.
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs,including filling of cement concerete in steel frame, etc completed all as specified and directed by Engr-in-charge.
M&L 35mm thick 2nd class HW , factory made plain,framed panelled shutters (Any numbers of pannels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneering on both faces. The size of the rail and size as per IS 1003 (Part-I) kiln reasoned and chemical pressure treated completed all as specified and directed by Engr-in-charge..
M&L 2nd class hardwood 35mm thick fly proof shutter open rebated and prepared to received glass, gauge etc (without sash bars) edge of tramping plain chamfered or rounded fitted with cut and metered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.by Engr-in-Charge
S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.
S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws completed all as specified and directed by Engr-in-charge.
S&F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, completed all as specified and directed by Engr-in-charge.
M&L Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints completed all as specified and directed by Engr-in-charge.
S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors completed all as specified and directed by Engr-in-charge.
S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors completed all as specified and directed by Engr-in-charge.
S&F 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall completed all as specified and directed by Engr-in-charge.
S&F 100 mm bore T Bends (any radius), diminishing pieces or tapers (larger bore measured) completed all as specified and directed by Engr-in-charge.
S&F 125mm dia PTMT grating fixed over trap with cement completed all as specified and directed by Engr-in-charge.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, completed all as specified and directed by Engr-in-charge.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs completed all as specified and directed by Engr-in-charge.
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs completed all as specified and directed by Engr-in-charge.
S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, completed all as specified and directed by Engr-in-charge.
S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair completed all as specified and directed by Engr-in-charge.
S & F pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia completed all as specified and directed by Engr-in-charge.
S& F bib taps CP brass fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule 15 mm dia completed all as specified and directed by Engr-in-charge. .
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed completed all as specified and directed by Engr-in-charge.
S & F in repair stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,20mm bore size screwed both ends for iron pipe or for unions and fittings and fixed completed all as specified and directed by Engr-in-charge.
Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) completed all as specified and directed by Engr-in-charge.
M&L for 100 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc completed all as specified and directed by Engr-in-charge.
M&L for 40 mm thik Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub bases,floors and paving etc completed all as specified and directed by Engr-in-charge.
M & L for PCC (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work completed all as specified and directed by Engr-in-charge.
M&L 60mm thick interlocking (M-35) cement concrete tiles (Coloured glossy finish) with grey cement and pigment of approved design & pattern as approved by GE, set over & including 25mm sand cushion over 50 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate over sub base completed all as specified and directed by Engr-in-charge.
M&L cement concrete (1:4:8) type C-2 using 40 mm graded stone aggregates, as in concrete bed to RCC drain pipes in any depth including packing under and haunching against the sides of pipes 150 mm bore after the pipes are laid, jointed and tested completed all as specified and directed by Engr-in-charge. Note : drain pipe shall be measured and paid separately.
M&L RCC pipe 150 mm bore class NP-2 laid and jointed complete with collars, laid in trenches, and testedcompleted all as specified and directed by Engr-in-charge.
M&L for precast cement concrete Type C1, 1:3:6 (20mm graded aggregate) in landings, cover slabs (for drain etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6,completed all as specified and directed by Engr-in-charge.
M&L for PCC 1:3:6 Type C-1 using 20 mm graded coarse aggregate as in coping including necessary formwork and benching in bottom of manholes in half round shape completed all as specified and directed by Engr-in-charge.
S & L for LT UG cable 2 core 10 sqmm XLPE Insulated sheathed armoured 1100 volts grade laid in trenches completed all as specified and directed by Engr-in-charge.
M & L for dry sand cushioning to underground cables in trenches including spreading, levelling, hand punning and consolidating, completed all as specified and directed by Engr-in-charge.
M&L for class B bricks for cable all completed all as specified and directed by Engr-in-charge.
Supply, lay and testing medium grade GI Tubing of size 25 mm bore with all fitting such as tee bends union elbow reducer etc laid in trenches/fixed to walls/floors, ceilings completed all as specified and directed by Engr-in-charge.
Supply and fix gun metal gate valve of size 25 mm bore, cast screwed down, High pressure with iron wheel handle , Screwed both ends for iron pipe or unions completed all as specified and directed by Engr-in-charge.
Cutting Existing steel tubing of size 40 mm to 50 mm for alteration or additions (each cut measured) including earth work and accessories like dummy plug union socket etc in any condition completed all as specified and directed by Engr-in-charge.
M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one Ceiling/Ex Fan point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc completed all as specified and directed by Engr-in-charge.
All as per item no 82 for One three pin 5 Amp socket outlet point with cables 1.5 sqmm size on independent board completed all as specified and directed by Engr-in-charge.
All as per item no 82 for One three pin 5 Amp socket outlet point ,with cables 1.5 sqmm size on same board completed all as specified and directed by Engr-in-charge..
All as per item No 82 but FRLSH copper stranded cable of size 2.5 sq mm for 3/6 pin socket outlet 15 amp on one independent board. alongwith all fitting and accessories completed all as specified and directed by Engr-in-charge.
S&F 5 Amp switch piano type single pole one way incl dismentling taking down unsv one all as specified and as directed
S&F socket flush type 6 amps, 5 pin, 230v incl dismentling taking down unsv one all as specified and as directed
S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismentling taking down unsv one all as specified and as directed
S&F Ceiling rose surface Bakelite three terminal all incl dismentling taking down unsv one completed all as specified and directed by Engr-in-charge.
S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz incl dismentling taking down unsv one completed all as specified and directed by Engr-in-charge.
S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismentling taking down unsv one all as specified and directed. MAKE-Legrand/ Schneider/ABB
S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv one all as specified and directed. MAKE- Legrand/ Schneider/ABB
S&F MCB, Double Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv one all as specified and directed. MAKE- Legrand/ Schneider/ABB completed all as specified and directed by Engr-in-charge.
S&F ceiling fan of 1200 mm sweep complete incl fan suitable fan road with suitable clamp, nut, bolt & washers completed all as specified and directed by Engr-in-charge. Make- Havells/Bajaj/Usha
S&F Exhaust fan Metal body light duty 300 mm sweep complete with grill, Make- Havells/Bajaj/Usha completed all as specified and directed by Engr-in-charge.
S&F LED Tube light fitting, 18/20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos+E12 any type incl dismentling taking down unsv one all as specified and directed. Make- Havells/Bajaj/Philips/CG
S&F lamp Holder insulated body with back plate for batten fitting completed all as specified and directed by Engr-in-charge.
S&F LED lamp 9 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) completed all as specified and directed by Engr-in-charge .
S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener completed all as specified and directed by Engr-in-charge.
M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.
MANIYA CONSTRUCTION CO
VAISHNAVI CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .