Supply and Eraction of 12.5M High mast with 5 nos

Amount

Supply of 12.5 Mtr High mast system with all accessories mast shaft fully hot dip galvanized and should with stand wind velocity of 160 km/hr without gear box and power tool

Supply and delivery of 200W LED (Flood light Type) Lamp Fittings made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9. System efficacy >85, Operating Volage Range120 -270 ~ Rated Power 200W Current (A) @240V 0.880, Wattage (W) @ 240V - 200W , Power Factor >0.9 Current Harmonics (THD) <10% Operating Conditions Operating Frequency 50Hz Operating Temperature Range -20°C to +50°C Colour Temperature Cool White (5700+_300K) Luminous Flux >22000 Lumens package not less 100 - 110 lm/W Life Span > 50,000 Hours Approx,waight in (KG) 12.65kg :. Body Alluminium Die casting Body Heat Sink Optimized thermal design to ensure maximum life.Protection of IP 65 Standards for Dust and Water including interconnection etc; complete as per Standard Specification.as directed by the departmental officer.

Design and casting of Suitable foundation with foundation bolt RCC cement concrete including Steel cement centering jelly and stand including earth work excavation and refilling

Supply and laying of 2x16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD -199)

Erection and commissioning of 12.5 mtrs High mast on the above said concrete foundation using suitable equipments

Fixing of 200w LED flood light luminaries in the lantern carriage including internal wiring using flexible copper cable complete.

Earthing as per PWD standard with an earth eletrode of 2 mtr Class B GI Pipe of dia not less than 32mm complete with necessary masonry work. (SD -234)

Add GST 18%

SASI BUILDERS