SPECIAL REPAIR TO MAIN ENTRANCE OF ADMIN BLOCK AT PCDA (P) PRAYAGRAJ AND PROVN OF 03 X SPLIT AC (2 TON), 30, 20 AND 50 DESERT COOLER, 200 AND 40 X CEILING FANS AND 3 X DEEP FREEZER WITH ALL CONNECTED ITEMS AT VARIOUS UNITS OF NEW CANTT PRAYAGRAJ

Amount

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/ blankets any thickness, including cover fillets complete all as specified and directed.

S&F for Aluminium composite panel sheet 3mm thick (plain, coloured, spl colour/ textured as directed) fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling, columns etc in vertical surface complete all as specified and directed. (Note : The rate should be incl of scaffolding upto 8.0 m height).

S&F for SS steel letters having text height of 60 cm of adequate thickness and fixing on required height incl all necessary screws, fastner etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.

S&F for Rolled mild steel hollow sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, posts etc fixed with angle cleats or other connecting plates complete all as specified and directed.

Dismantling of floor,wall tiles incl cement mortar bedding but not backing and removing servicable tiles to stores complete all as specified and directed.

M&L for double charge vitrified tiles 8 to 10 mm thick (square/rectangular) premium quality area of each tile exceeding 0.42 sqm but n exc 1.00 sqm in floors or as in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick cement mortar 1:4 complete all as specified and directed. Note :- Colour and design approved by Engineer-in-Charge.

Demolition of concrete of any description and in any position complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 (12.5 mm graded crushed stone aggregate) as in levelling course of any position complete all as specified and directed.

M&L for heavy duty endura coloured tiles of size 30cm x 30cm, 8 to 10 mm thick; set jointed and pointed in neat cement slurry in floors, and cut and polished incl 15 mm thick screed bed or bedding layer of mortar CM (1:4) complete all as specified and directed.

Dismantling of stone slab and tiles laid bedded and pointed of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for red granite 16 to 18mm thick of any type work table rubbed and polished in steps , jambs, pillars, window cills, cooking plateforms and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed or bedding layer of mortar in CM (1:3) complete all as specified and directed.

Rounding to edges of stone slabs one edge such as is steps, cooking platfroms, and similar works, complete all as specd and directed.

Cutting Horizontal grooves to top of stone slabs such as is steps, cooking platfoms, and similar works, complete all as specd and directed.

M&L for preparation painting old steel surfaces of any description over 10cm width or girth not other wise described with two coats of synthetic enamel paint complete all as specified and directed .

S&F for 12mm thick Milky white frosted toughened glass acid wash/sand blasted glass for doors, fixed glazing, railing, partitions etc with necessary holes for providing SS fittings and including locks, two nos 600 mm long SS handles, bottom and top patch & pivots, SS round door stoppers, hydraulically double action floor springs, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof etc complete all as specified and directed.

M&L for Coloured/plain etching over toughed glass before fixing of glass or over existing glass complete all as specified and directed.

S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified.

S&F for 150 mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F for 200 mm long SS tower bolt, fixed with stainless steel screws complete all as specified and directed.

S&F in repair Brass Mortice Lock, 4-6 Lever fixed to Aluminum doors complete all as specified and directed.

S&F for 10mm thick plaster of paris ceiling (Gypsum false ceiling) to flat / curved surfaces including sunk or raised moulding with POP and finishing complete all as specified over GI frame work including all necessary drilling, cutting to fix electrical items complete all as spfd and directed with followings: (a) GI sheet channel made to shape 30X25X20 of 24 gauge fixed with rowel plug with screw 450mm centre to centre along with perimeter of walls. (b) GI sheet channel make to shape 50X40X40 mm of 24 gauge placed at 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runner of size 45X10X10 mm of 24 gauge fixed at 1200mm c/c leaving frame of one side wall (in other span) (d) GI sheet 25mm wide and 20mm gauge suspenders fixed with the screw steel fasteners to rrof ceiling @ 1200mm c/c including plugging in RCC slab (e) GI wire mess fixed to framework (f) Two coats plastic emulsion paint over prepared smooth finished surfaces complete all as specified and directed.

S&F for decorative POP cornies of sectional area 30 to 50 sqcm fixed on brick or RCC ceiling complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:6 on on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 1 to 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed.

M&L for Complete removal of existing treatment of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 1 to 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed.

M&L for Complete removal of existing treatment of ceiling and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 1 to 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed.

M&L for Complete removal of existing treatment of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 1 to 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying texture Paint two or more coats applied @ 3.28 ltr /10sqm white or tinted over one coat of primer @ 2.2 kg/10 sqm complete all as specified and directed.

M& L for one or more coats French polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed.

Taking down and Refixing wooden/ aluminium door shutters of any description exceeding 1 Sqm and not exceeding 2.0 Sqm each in the same opening , easing and adjusting including refixing builders hardwares and renewal of unserviceable cleats, screws complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.

Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.

M&L for Point wiring complete in modular switch, socket with 1.5 Sq mm (nominal area) PVC insulated flame retardent low smoke un-sheathed and multicore copper conductor cable with colour code ISI marked in and including PVC concealed conduit ISI marked and conduit fittings for one light point/fan point/engagement light controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable Anodized sunken box as per manufacture design and plate for modular of switch , socket etc with grid plate, crown with captive screws complete all as specified & directed. Note : (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling.

Description same all as per srl Item No. 41 here in above but one three pin switch socket outlet 5 Amps on the independant board complete all as specified & directed.

Description same all as per srl Item No. 41 here in above but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 amps power point complete all as specified & directed.

S&F in replacment of modular switch 1 way, 5/6 amps, 230V AC, one way complete all as specified & directed.

S&F in replacment of modular socket out let 2-in-1, 3 pin, 5/6 amp flush type 2 module complete all as specified & directed.

S&F in replacment of modular Switch out let 2-in-1, 3 pin, 15/16 amp flush type 2 module complete all as specified & directed.

S&F in replacment of modular socket out let 2-in-1, 3 pin, 5 /16 amp flush type 2 module complete all as specified & directed.

Supply and fixing Ceiling rose, surface bakelite 2 to 3 terminal, 240 volts, 5 Amps ISI Marked complete all as specified & directed.

Supply and fixing in replacement of Wall mounting fans PVC body of size 400 mm sweep 240 Volt Complete all as directed by Engr-in-Charge.

M&L for energy saver LED battan fitting 20 watt, 230 Volts, single tube mounting including with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection two core copper cable from ceiling rose to led light fitting all as directed . Make Philips Essential SmartBright BN170C LED20S-6500 PSU L120 or equivalent makes as approved by GE

Supply and fixing in replacement of 12 W LED downlighter Ultra slim decorative aluminium casted recess mounted round fixture in white finish with opal diffuser and separate electronic driver ,suitable for low depth ceiling complete all as specified & directed. Make: Phillips Green Perform sleek Cat Part No DN296B LED12S-6500 PSU W or equivalent makes as approved by GE

Supply and fixing in replacement of 42 W LED,6500K 2'x2' Panel Ultra slim recess mounted LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications complete all as directed by Engr-in-Charge. Make -Philips Cat part No: Full glow RC380B LED42S-6500 G6 L60W60 PSU OD S1 or equivalent makes as approved by GE

S&F in replacement of LED Environmental friendly, new generation, energy saving, decorative IP66 using Cove LED as light source contemporary design complete all as directed by Engr-in-Charge. Make : Philips Cat part No : TrueFashion Track ST700T LED10 930PC PSU MB 1C WH IN or equivalent makes as approved by GE

S & F in replacement of High brightness Flex Cove G5 LED strip professional solution with uniformity of light required for perfect Indoor application, flexible LED Strip IP44 versions complete all as directed by Engr-in-Charge. Make: Phillips Cat Part No Flex Cove G5 Pro LS170S LED10 TNW IP44 L5000 PRO or equivalent makes as approved by GE

S&F in Replacement of double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified & directed.

S&F for MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified & directed.

S&F for MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40/63 Amps complete all as specified & directed.

M&L for Sub Main Wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid PVC conduit ISI marked of size not less than 25 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified & directed.

M&L for concealed point wiring wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 Volts grade drawn in and including rigid non metallic white/ivory PVC conduit accessories/fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches/ sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 Volts grade for contineous earthing including cutting the chases and making good the surface by cement concrete mortar (1:3) and for matching/finishing of new surfaces either by means of plaster of peris/putti or distemper/colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for one point for socket outlet 5 Amps on independent board but not below the switch board in same vertical plane complete all as specified & directed.

S&F for Switch piano flush type, 5 Amps, 230 Volts AC, Single Pole, One way complete all as specified and directed.

S&F for Socket outlet 2-in-1, 3 pin, 5 Amps, flush type complete all as specified and directed.

S&F in replacement of factory made, sheet metal enclosure distribution boards, double door type, protection class (IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with suitable rating bus bar, SP&N 8 ways, 220 volts, complete all as specified and directed. Note : MCB shall be measured and paid separately under respective item of this schedule.

S&F in replacement of 240 Volts, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles, and current carrying capacity 6 to 32 Amps, in the MCB DB, complete with connection, testing and commisioning, all as specified and directed.

Supply, Fixing and testing Desert Cooler made of MS/PG Sheet not less than 2mm thick having capacity of 5000 Cum/hours, single phase, 50 Hz, 230 Volts including Exhaust Fan Motor 230 Volts of suitable capacity and submersible pump for water circulation and internal water distribution, wooden pad and front direction grill complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing of Air Cooled Split Air Conditioner electric driven, single phase of capacity of 2.0 TR, BEE, 3 Star rated complete all as specified & directed.

M&L for Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts capacity for Air Conditioner, complete all as specified and directed

M&L for Sub Main Wiring with 2 x 4.0 Sqmm size along with earth wire of size 1 x 4.0 Sqmm of FRLSH PVC insulated copper conductor, single core cable multi stranded in and including 20mm PVC conduit of suitable size in all as required at site for Air Conditioner, complete all as specified & directed.

Supply & Fixing for Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 Volts to 250 Volts with out put voltage stabilizer at 230 Volts with accuracy of + 2.5% and of capacity 5 KVA, complete all as specified and directed

Supply, Fixing, Connecting and Testing BLDC Ceiling Fan 1200 mm sweep, single phase, 230 Volts with three core PVC insulated multi stranded flexible copper conductor wire from ceiling rose to fan including fan connector and necessary fixing arrangement, complete all as specified and directed

M&L for Fan Hook made out of MS Flat 50 x 6mm suitable shaped to mount on 40mm dia GI Pipe/Angle Iron including welded MS bar 12mm dia half round shaped and necessary nuts & bolts, complete all as specified and directed

M&L for provisioning of new down rod made out of GI tubing medium grade cutting, threaded and holes drilled both ends (dual arrangement), making holes - 2 Nos, painting with two coats of synthetic enamel white colour paint, fixing the down rod to the fan and re-hanging the fan complete including their electric connections as specified and directed. Note : GI tubing will be measured and paid separately under S&F item here-in-after.

S&F for GI Tubing 15mm bore medium grade ISI marked for fixing in item serial No 71 here in above, complete all as specified & directed.

S&F in replacement of factory made, sheet metal enclosure distribution boards, double door type, protection class (IP-43), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with suitable rating bus bar, SP&N 4 ways, 220 volts, complete all as specified and directed. Note : MCB shall be measured and paid separately under respective item of this schedule.

Supply & Fixing for Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 Volts to 250 Volts with out put voltage stabilizer at 230 Volts with accuracy of + 2.5% and of capacity 3 KVA, complete all as specified and directed

M&L for concealed point wiring wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 Volts grade drawn in and including rigid non metallic white/ivory PVC conduit accessories/fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches/ sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 Volts grade for contineous earthing including cutting the chases and making good the surface by cement concrete mortar (1:3) and for matching/finishing of new surfaces either by means of plaster of peris/putti or distemper/colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for 5 Amp independent socket point controlled by one switch complete all as specified & directed.

Description same all as per srl Item No 75 here in above but 3 pin 15 Amp switch socket on independent board with 4 sqmm copper cable including 4 sqmm FRLS PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed

Supply & Fixing for Switch Piano Flush type, 16 Amps, 230 Volts, Single Pole, One Way, complete all as specified and directed

Supply & Fixing for Socket out let flush type, 3 pin, 16 Amps, complete all as specified and directed

Supply & Fixing for Deep Freezer, 320 Litre, 230 Volts, 50 Hz, Top Opening, complete all as specified and directed

Cutting existing steel tubing for addition or alteration and screwing existing steel tubing for alteration or addition lengthening screw on pipe to form connector of size 15/20mm dia complete all as directed and specified

S&F for Stop Valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed and specified

S&F for Float Valve of size 15mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule to connected GI Pipe 15mm bore on Desert Cooler complete all as specified and directed

S&F for PVC Connection made of PVC 12mm dia with both side brass socket 15mm dia to connected GI Pipe 15mm bore on Desert Cooler complete all as specified and directed

Schedule of Credit (MINUS) Rs. 19,372.00 B/F from Serial Page No. ____ [Note : Details of items for schedule of credit is given on Srl Page No. ___] This amount shall be automatically deducted to arrive at tendered sum

Technological Associates (BID ID -3459088)

R K CONSTRUCTION COMPANY (BID ID -3466541)

R.K.ASSOCIATES (BID ID -3466816)