Road Works under TURIP 2025 -26 SFC Devolution Fund of Pacode Town Panchayats

Picking the existing BT Surface to 50mm, deep and replacing the metal fit for reuse, to bring the existing surface to camber including levelling and surfacing to camber including levelling and sectioning as dircted by the Departmental officers including labour and hire charges for tools and paints and all other incidental charges etc complete as per standard specification as per claus 702 of MORTH Rev-5.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc complete.

Cement concrete of mix 1:5:10 (one part of cement five part of sand and ten part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering i found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO: 30 & 86

Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Plain Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using 20 mm for wearing coat including laying, compacting, finishing and curing etc., complete as per standard specifications and as directed by the departmental officers. - Mixing by mechanical means

Providing and fixing bitumen tar pad including cost and conveyance of expansion joints, shallimar pad and jointing seal lands and fixing them in position etc. complete as per standard specification as directed by Engineer in charge.