C/O PHC Building at Koti (SH Providing and fixing Glazing at First Floor and painting work etc

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:4:8 (1 cement : 4 coarse sand): 8 graded stone aggregate 20 mm nominal size) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:(i) Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(a) Seconclass Deodar Wood (i) 35 mm thick including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : (a) Seconclass Deodar Wood (i) 35 mm thick including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :(i) 250x16mm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :(i) 200x10mm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125mm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.(i) Twin Rubber Stopper including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing M.S. BP sheet 1.66 to 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting , fixing and welding to steel roof member and applying a coat of red lead of primer complete in all respect as per directions of the Engineer-in-Charge.including entire carriage of materials in all leads and lifts

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).(i) 6 mm thick Cement fiber board as per IS: 14862 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing steel window made of frame with mild steel channel 75*40(Seventy Five*Forty)milimeters and mild steel flat of 75*5(Seventy Five*Five)milimeters to make one frame providing double rebate with making square steel section with mild steel flat of 20*4(Twenty*Four)milimeters and 12*4 (Twelve *Four)milimeters, shutters of Z section including glass panes of 3(Three)milimetres thick in glazed panel and wire gauge of designation 85(Eight five)G with wire of 0.56(Zero point five six)milimeters dia in wire gauge panel and fixed glazing fixed with angle and T section of 25*25*3(Twenty five*Twenty five*Three)milimeters and mild steel flat of 12*4(Twelve * Four)milimeters in sash bars duly welded of all corners and joints properly hold fast of mild steel flat 200*50*5(Two hundred*Fifty*five)milimeters dulywelded of corner and joints of all steel section embeded in cement concrete block 1:3:6 one isto three isto six (100*100*100(One hundred*One hundred*One hundred)milimeters size(One cement Three Sand;Six graded stone)aggregate 20(Twenty)milimetres nominal size)including providing and fixing of fittings that is handles tower bolts hooks and eyes and applyuing a coat of primer with red lead paint and fixing in position complete as per drawing,direction of the Engineer-in-Charge and HP,PWD,Specification 1990-Volume-I including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.nd applying a coat of primer with red lead paint and fixing in position complete as per drawing,direction of the Engineer-in-Charge and HP,PWD,Specification 1990-Volume-I including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(i) Size of Tile 600x600 mm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(i) 110 mm diameter including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a) 87.5* (i) 110 mm Dia Bend including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

(ii) Single Tee With Door (i)110x110x110 mm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

15 mm cement plaster on the rough side of single or half brick wall of mix :(i) 1:4 (1 cement: 4 fine sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.(i) With cement mortar 1:4 (1 cement : 4 fine sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying Priming Coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying Priming Coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :(i) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Shreeji & Company

Mast Ram Sharma