Repair, Painting and Polishing of Wooden and Steel Furniture and Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Ply Top at BSO(S) Ahmednagar under GE(South) Ahmednagar

Amount

Removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia , medium grade ISI marked weight not less than 450 Grams of each directed.

Removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed .

Removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked Make TATA/Jindal/Swastik/Zenith including cutting, threaing at both ends and fixing all as directed .

Converting the unserviceable long rail obtained from item No 3.00 above in to two short rail including cutting threading at both ends and fixing all as directed.

Removing of unserviceable short rails of GI Charpoy and converting the same in to two legs including cutting, threding at one end fixing all as directed.

Removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighting not less than 1.50 Kg per charpy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

Removing of unserviceable nylon newar from charpoy GI pipe, S&F commercial plywood of size 1980mm x 900mmx12mm thick BWR grade making (Kitply, Greenply or Archid plywood) with 06 Nos nut with bolt of 6mm dia 60mm long to be used for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge (a) S&F 3 Nos 25mm square MS hollow tube 16 guage wall thickness of length not less than 83.6cms each welded with fillet weld all around 3mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed Note : (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. (iv) Legs of the charpoy to be welded with 3mm thick 50mm dia MS circular plate duly painted with two coats of synthetic enamel paint black over coat of red oxide primer.

M&L for removing US Square tube from Table dining ORs, Table clerk steel and Table office officer steel and S&F new square tube all as per directed by Engineer-in-charge

M&L for removing unsv top from Table Dining ORS and S&F new Top made out of 18/19mm Particle Board incl cover of 22 mm Guage alumn sheet as per specification shown on drawing and as directed by Engineer-in-charge.

M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front legs

Front/side rails

Stiffners

M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front legs

Rear/front/side rails

Stiffners

Back rest

M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front legs

Rear/front/side rails/including cane hole

Stiffners

Back rest

Arms rest

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front/rear/rails including cane holes

Side rails for seat including cane holes

Front /rear/stiffeners

Side rails for back rest including cane hole

Upper /lower rails for back rest including cane

Arms rest

M&L for removing US plastic cane from chairs , Bin soil linen and stool dressing and recanning with 2 MM wide and canning boarder 3/4 wide cane (Make of cane Komal)

M&L for removing US plywood from chair wooden bottom without arms and supply and fix new plywood seat 6MM thick commercial ply to the existing chair WB without arms duly french polished as reqd and as directed by Engr-in-Charge

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete

Legs for table dining 6/8 pers

Front/rear rails of table dining 6/8 pers

Side rails for table dining 6/8 pers

Centre rails of table dining 6/8 persons

Leg of table 3'x2' without with drawer

Front/rear rails of table 3'x2' without with drawers

Side rails of table 3'x2' without with drawers

Drawers of Table 3'x2'

Front /rear top/bottom rails of table writing

Legs of table writing

Stiffeners of table writing

Side rails of table writing

Legs of table centre

Front/rear rails of table centre

Stiffeners of table centre

Bottom rails for table centre

Legs of table 2' x 2'

Front/rear/side rail of table 2 x 2

Leg of table 3 x 3

Front/rear/side rails of table 3 x 3

Legs of Table dining 4x3

Side rails of Table dining 4x3

Legs of peg table

Bottom rail of peg table

Top rail of peg table

Leg of teapoy

Top rail of teapoy

Bottom rail of teapoy

M&L for removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete

Legs of sofa chairs 70 x 35 x 30MM

Arms rest of sofa chairs 70X35X725MM

Wooden bearer 40X40X670MM

Wooden batten 50X20X670MM

Wooden rails 35X100X670MM

Wooden frame for head 70X35X600MM

Wooden rails to support back frame 30X50X670MM

Wooden bearer 40X40X1730MM

Wooden rail 35X100X1730MM

Wooden frame for back 70X35X1660MM

M&L for removing unserviceable wooden parts from Bed hard and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete

Short rails of bed hard

Long rails of bed hard

Stiffners of bed hard

Front leg of bed hard

Rear legs of bed hard

M&L for removing old US head rest from the bed hard/bed newar as per specification shown in the drg and as directed by Engr-in-charge

M&L for removing old US foot rest from the bed hard/bed newar as per specification shown in the drg and as directed by Engr-in-charge

CHAIR SCHOOL WITH HAND BOARD -

M&L for replacement of hand board of chair school of Make Godrej all as specified and shown on drg FD/E6/MAP/5

M&L for replacement of Seat of chair school Make Godrej all as specified and shown on drg FD/E6/MAP/5

(c) M&L for preparation frame of school with hand board wherever required shall be welded and scrapping cleaning of frame of chair school with hand board broken/damaged & painting with one coat of paint enamel synthetic black in colour all specified and directed by Engineer-in-charge FD/E6/MAP/5

M&L for removing of US plywood from bed hard and S&F new ply wood 12MM thick commercial Make-Kitply/green ply/Archid/Century

M&L for removing unsv drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and applying french polish as reqd as per directed by Engr-in-charge

M&L for removing US top frame of table dressing gents and S&F new top frame to the existing table dressing gents and applying french polish as reqd as per specification given in drg

M&L for removing US looking mirrior with frame from the table dressing Gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as reqd of as per specification given in drg.Make of the Mirror Modi Guard

M&L for removing US Knob from table dressing gents and S&F new Knob of approved quality and as directed.

M&L for removing US drawer from the table dressing ladies and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and as directed by Engr-in-charge

M&L for removing US top frame of table dressing ladies and S&F new top frame to the existing table dressing ladies duly french polished as reqd or as per specification given in drawing

M&L for removing frame with Mirror of the table dressing ladies and S&F new frame with Mirror to the existing table dressing ladies duly french polisedh wherever required. Make of mirror Modiguard

M&L for removing US back base ply from table dressing ladies with mirror and S&F new back base ply to the existing Table dressing ladies with mirror duly french polished as reqd. Make of mirror Modiguard

M&L for removing broken US sliding glass shutter and alumn channel and S&F new glass shutter and alumn channel to the existing table dressing ladies

M&L for removing US back from Side Board and S&F new 6mm thick plywood commercial of same size duly french polished as reqd as per specification and as directed by Engr-in-charge

M&L for removing US drawers from Side Board and S&F new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd as directed by Engr-in-charge

M&L for removing US door shutter from Side Board and S&F new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around all as specified and as per drg.

M&L for removing US Knob from Side board and S&F new knob with suitable screw as directed by Engr-in-charge

M&L for removing US top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drg

M&L for removing US legs from table dressing ladies and S&F new legs made out of 1st class hard wood Indian teak wood duly french polished as reqd as per specification and as directed by Engr-in-charge.

Material and labour for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion by sprayer complete . Make of paint shall be Apcolite by Asian paints

M&L for removing the UNSV tops from the following tables and S&F new tops made out of 18/19 MM prelaminated particle board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and directed by Engr-in-Charge :- (a) Table writing

Table writing

Table centre

Top for teapoy verandah

Table 600X600 MM

Table 3X3

Table dining 4'x3'

Table peg

Teapoy

Table dining 6 persons

Table dining 8 person

Table 3X2 without & with drawer

M&L for removing US Hasp and staple 75mm chromium plated and fixing to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw all as specificied and shown on drawings

M&L for removing US CP Handle from locker bedside & providing new CP handle 100mm and fixing with suitable screw /bolt to shutter of locker bedside steel all as specificied and shown on drawings

M&L for removing Unsv hinges from locker bedside and S&F new hinges with suitable welding to locker bed side steel all as specificied and shown on drawings

M&L for removing US legs from locker bed side and S&F new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding the legs shall be painted with one coat of red oxide primer and two coats of synthetic enameled paint with match the existing all as specificied and shown on drawings

M&L for removing US shutter of locker bedside and S&F new shutter to locker bedside steel and painted with two coats of red match with existing paint as shown on drawing.

M&L for removing US conduit pipe and S&F new 20mm mild steel conduit pipe with socket to locker bedsidesteel all as specificied and shown on drawings

M&L for removing UNSV handle from Almirah Large Steel with shelves and providing new handle for Almirah large steel and Almirah med steel with shelves as per specification and shown on drawing

M&L for removing US locking device of Almirah large steel with shelves and Almirah med with shelves and providing new locking device including cover as per specification and shown on drawing and for directed Engr-in-charge

M&L for removing US lock from Almirah large steel with shelves and S&F new Godrej or equivalent lock with duplicate key all as specified and shown on drawing and as directed by Engr-in-charge

M&L for removing US shelves from Almira large steel with shelves and S&F new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing as directed by Engr-in-charge

M&L for removing US legs from Almirah large steel with shelves and Almirah med steel with shelves and S&F new legs made out 0f 1.00MM thick black sheet as specified and shown on drawing and as directed by Engr-in-charge

M&L for removing US clips and providing new clips to shelves of Almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed by Engr-in-charge

M&L for removing US locks from table office clerk and table office officer steel and S&F new locks to table clerk steel and table office officer steel

M&L for removing US hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed

M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :-

Seat of chair CB steel with arms

Back of chair CB steel with arms

M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :-

Seat of chair CB steel W/O arms

Back of chair CB steel W/O arms

M&L for removing old UNSV seat from chair CBA spl and S&F new seat made out of 1st class hard wood Indian teak wood duly canned with 2MM plastic cane to the existing and as directed

M&L for removing old UNSV back of chair CBA spl and S&F new back of chair made out of 1st class hard wood Indian teak wood dulycanned with 2 MM plasticcane to the existing and directed .

M&L for removing US hand rest from chair CBA spl with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished as specified and directed by Engr-in- charge

M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting of chair verandah.Make of Apcolite by Asian paints high glossy.

M&L for removing US planks from form without back and S&F new plank made out of 1” class Indian teak wood to the existing form without back as per specification given in drawing

M&L for removing US Seat/Back from sofa set to seat five,four and three and S&F 100MM thick cushion of 32 density foam duly covered & stiched.Note- Tapestry cloth shall be of Bombay Dyeing /Raymond furnishing /"D" Décor , colour of cloth will be approved by GE,Make of foam Sleep/sprinwell

M&L for removing US tapestry cloth from the existing sofa foam cushion and S&F new cushion cover out of good quality tapestry coth rate not less than Rs 250/= per mtrs and as per sample approved by GE including provn of Zib at one side of cover rest all as specified in drawing

M&L for removing US foam cushion foam leather from seat of chair easy cushioned with arms and S&F new cushioned seat made by good fibre foam leather and fixing to the existing chair easy with applying french polishing as reqd.

M&L for removing UNSV foam cushion foam leather from back of chair easy cushioned with arms and S&F new cushioned back made by good fibre foam leather and fixing to the existing chair easy with applying french polishing as reqd.

M&L for removing US foam cushion foam leather from back of chair CB steel with arms arms and S&F new cushioned back made by good fibre foam leather and fixing with the existing chair steel with arms duly painted as reqd or as per specifications and directed by Engr-in-Charge.

M&L for removing US foam cushion foam leather from seat of chair CB steel with arms arms and S&F new cushioned seat made by good fibre foam leather and fixing with the existing chair steel with arms duly painted as reqd or as per specifications and directed by Engr-in-Charge.

M&L for removing US frame from square tube form without back and S&F new square tube wherever required to existing form without back with suitable welding all as shown on drawing

M&L labour for painting to the frame of form without back with one coat of synthetic enmal paint black to existing form without back all as per specification and shown on drawing

M&L for removing dent and bends of following steel furniture articles and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete.

Almirah large steel with shelves

Almirah med/small with shelves

Locker bed side steel

Table with drawer steel

Table office clerk steel

Table office officer steel

Table dining ORs

Chair CB steel with arms

Chair CB steel without arms

Chair verandah steel with white paint

Chair CBA special

M&L for removing existing polish of following wooden furniture and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions.Note:-Colour of polish will be approved by GE

Book shelf open small

Book shelf open large

Bed hard with ply top

Chair WB without arms

Chair writing

Chair dining

Chair easy

Sofa set 4 seater

Sofa set 5 seater

Table centre

Table peg

Table dining 6 person

Teapoy

Table bed side

Table dressing Gents with mirror

Table dressing ladies with mirror

Table writing

Table dining 8 pers

Bin soil linen

Side Board

Stool dressing CB

Table card

KAMINS CARE

Mahesh Traders

PRATHMESH ENTERPRISES

KASTURILAL HARICHAND OHRI AND SONS

BALAJISTEELINDUSTRIES